[Sun May 20 09:28:48 2012] Detection parameters:
  Position = (316.9, 314.0) = 0 55 19.64 46 12 55.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 16544.1 +/- 150.5
  Background counts = 10.6
  Rate = 1 +/- 0.01

[Sun May 20 09:28:48 2012] Off-axis axis estimate = 1.75'
[Sun May 20 11:29:52 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun May 20 11:29:52 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun May 20 11:29:52 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Sun May 20 11:29:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Sun May 20 12:16:26 2012] fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 20 12:16:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src1.csv
[Sun May 20 12:16:26 2012] fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 20 12:16:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src1.csv
[Sun May 20 12:16:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 12:16:26 2012] fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 20 12:16:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 20 12:16:26 2012] fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 20 12:16:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 20 12:16:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 12:16:47 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Sun May 20 12:16:47 2012] Spatial fit model total counts = 12665.500000, observed total counts = 13102.000000
[Sun May 20 12:16:47 2012] Offset between fit and detection position for source 2 = 0.096121 pixels
[Sun May 20 12:16:47 2012] Warning, changing simple spatial fit ID from 1 to 3
[Sun May 20 12:16:47 2012] 12671.040000 total counts/ 2323.840000 bgd. counts: snr = 214.644484
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.096121 pixels
  Position = (316.8, 313.9) = 0 55 19.68 46 12 55.9
  Extent = 5.0 (5.0-5.1)", rotation angle = 0
  Source counts = 10347.2 +/- 112.6
  Background counts = 2323.8
  Rate = 0.6 +/- 0.007
[Sun May 20 12:16:47 2012] Vigneting correction estimate = 1.000000
[Sun May 20 12:16:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 12:16:47 2012] Assessing source extent using major axis lower bound
[Sun May 20 12:16:47 2012] Source does appear to be extended
[Sun May 20 12:16:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 12:16:47 2012] Source is confused with source 4
[Sun May 20 12:16:47 2012] Source is confused with source 18
[Sun May 20 14:24:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 20 14:24:11 2012] Initial guess for spatial extent in simple fitting = 5.05"
[Sun May 20 14:24:11 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.088
[Sun May 20 14:24:11 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.05"
[Sun May 20 15:05:05 2012] fullrun_mos2_xmm0501230301_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 20 15:05:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230301_pi300-10000_cl_pass1_src1.csv
[Sun May 20 15:05:05 2012] fullrun_mos2_xmm0501230301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 20 15:05:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230301_pi300-10000_cl_pass1_src1.csv
[Sun May 20 15:05:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501230301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501230301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 15:05:05 2012] fullrun_mos2_xmm0501230301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 20 15:05:05 2012] fullrun_mos2_xmm0501230301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 20 15:05:05 2012] Fit fullrun_mos2_xmm0501230301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 20 15:05:23 2012] Spatial fit model total counts = 15997.100000, observed total counts = 14869.000000
[Sun May 20 15:05:23 2012] Offset between fit and detection position for source 2 = 0.023392 pixels
[Sun May 20 15:05:23 2012] 15646.550000 total counts/ 4793.450000 bgd. counts: snr = 156.757996
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.023392 pixels
  Position = (316.8, 313.9) = 0 55 19.69 46 12 56.0
  Extent = 5.0 (4.9-5.0)", rotation angle = 0
  Source counts = 10853.1 +/- 125.1
  Background counts = 4793.4
  Rate = 0.7 +/- 0.008
[Sun May 20 15:05:24 2012] Vigneting correction estimate = 1.000000
[Sun May 20 15:05:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 15:05:24 2012] Assessing source extent using major axis lower bound
[Sun May 20 15:05:24 2012] Source does appear to be extended
[Sun May 20 15:05:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 17:17:39 2012] Counts = 10853.100000, rescaling region sizes by 3.000000
[Sun May 20 17:17:39 2012] XMMSAS src. selection expression = ellipse(27514.461220, 27264.861000, 894.101426, 894.101426, 0.000000, X, Y)
[Sun May 20 17:17:39 2012] Writing source region out to fullrun_mos2_xmm0501230301_pi300-10000_pass1_cl_src2_src.reg
[Sun May 20 17:17:39 2012] Extracting stamp from image fullrun_mos2_xmm0501230301_pi300-10000_cl_sm2.00.img.gz, (265, 263) - (368, 365)
[Sun May 20 17:17:39 2012] XMMSAS bgd. selection expression = annulus(27514.461220, 27264.861000, 4470.507129, 8941.014257, X, Y) && !ellipse(25708.801460, 24880.605800, 416.440800, 416.440800, 0.000000, X, Y) && !ellipse(27049.591888, 27447.381653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22759.436920, 18528.116800, 403.278654, 403.278654, 0.000000, X, Y) && !ellipse(23513.649000, 27275.826200, 443.153613, 443.153613, 0.000000, X, Y) && !ellipse(24354.091200, 31357.473000, 345.593610, 345.593610, 0.000000, X, Y) && !ellipse(27274.589691, 26217.959717, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27505.226776, 23253.534546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28065.432648, 26498.968018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28406.378235, 27513.067078, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 17:17:39 2012] Writing fullrun_mos2_xmm0501230301_pi300-10000_pass1_cl_src2.gif
[Sun May 20 17:17:46 2012] Mean detx,y = (-15.28, 68.00) 
[Sun May 20 17:17:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 17:22:43 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 17:22:44 2012] Setting source spectrum file to fullrun_mos2_xmm0501230301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 20 17:22:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501230301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun May 20 17:40:57 2012] Updating aperture counts using extracted products
[Sun May 20 17:40:57 2012] Error reading totcts from fullrun_mos2_xmm0501230301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 20 17:40:58 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 17:40:58 2012] Using photon index=1.80, rate=0.653, arf fullrun_mos2_xmm0501230301_pi300-10000_pass1_cl_src2.arf
[Sun May 20 17:40:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 17:40:58 2012] Updating source flux to 6.5e-12
[Sun May 20 17:41:43 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Sun May 20 17:42:39 2012] Reading fit data from xmm0501230301/analysis//spectral/fullrun_mos2_xmm0501230301_pi300-10000_pass1_cl_src2_pl.csv
[Sun May 20 17:42:39 2012] Spectral fit parameter nH value = 4.6392e+20
[Sun May 20 17:42:39 2012] Spectral fit parameter PhoIndex value = 0.570545
[Sun May 20 17:42:39 2012] Failed to get F(0.3-8.0) from xmm0501230301/analysis//spectral/fullrun_mos2_xmm0501230301_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun May 20 17:42:39 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 17:42:39 2012] Using Nh = 4.6e+20, photon index=0.57, rate=0.653, arf fullrun_mos2_xmm0501230301_pi300-10000_pass1_cl_src2.arf
[Sun May 20 17:42:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 17:42:39 2012] Updating source flux to 1.3e-11