[Sun May 20 09:28:48 2012] Detection parameters: Position = (425.0, 337.9) = 0 54 34.32 46 14 39.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 44.6 +/- 8.9 Background counts = 7.9 Rate = 0.005 +/- 0.0009 [Sun May 20 09:28:48 2012] Off-axis axis estimate = 9.61' [Sun May 20 11:29:52 2012] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting [Sun May 20 11:29:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun May 20 11:29:52 2012] Initial guess for spatial extent in simple fitting = 11.23" [Sun May 20 11:29:52 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.947 [Sun May 20 11:29:52 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.23" [Sun May 20 12:16:26 2012] fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src9.ximg exists [Sun May 20 12:16:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src9.csv [Sun May 20 12:16:26 2012] fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src9_1.ximg exists [Sun May 20 12:16:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src9.csv [Sun May 20 12:16:26 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 20 12:16:26 2012] fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Sun May 20 12:16:26 2012] fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Sun May 20 12:16:26 2012] Fit fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly [Sun May 20 12:16:47 2012] Spatial fit model total counts = 104.000000, observed total counts = 104.000000 [Sun May 20 12:16:47 2012] Offset between fit and detection position for source 10 = 0.165207 pixels [Sun May 20 12:16:47 2012] 101.918100 total counts/ 74.617900 bgd. counts: snr = 3.160416 Spatial fit parameters: Offset between fit and detection position for source 10 = 0.165207 pixels Position = (424.9, 338.0) = 0 54 34.38 46 14 39.7 Extent = 4.1 (2.8-6.2)", rotation angle = 0 Source counts = 27.3 +/- 10.1 Background counts = 74.6 Rate = 0.002 +/- 0.0006 [Sun May 20 12:16:47 2012] Vigneting correction estimate = 1.000000 [Sun May 20 12:16:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 20 12:16:47 2012] Assessing source extent using major axis lower bound [Sun May 20 12:16:47 2012] Source does appear to be extended [Sun May 20 12:16:47 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 20 12:16:47 2012] Deleting source due to low Poisson probability 0.9