[Tue Aug 14 22:57:33 2012] Detection parameters:
  Position = (279.1, 285.1) = 0 22 57.42 61 41 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29522.0 +/- 205.4
  Background counts = 44.1
  Rate = 1 +/- 0.01

[Tue Aug 14 22:57:33 2012] Off-axis axis estimate = 1.71'
[Tue Aug 14 22:59:48 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 22:59:48 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Aug 14 22:59:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Tue Aug 14 22:59:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Aug 15 00:21:39 2012] fullrun_pn_xmm0501230201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug 15 00:21:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501230201_pi300-10000_cl_pass0_src1.csv
[Wed Aug 15 00:21:39 2012] fullrun_pn_xmm0501230201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug 15 00:21:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501230201_pi300-10000_cl_pass0_src1.csv
[Wed Aug 15 00:21:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501230201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501230201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 00:21:40 2012] fullrun_pn_xmm0501230201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug 15 00:21:40 2012] fullrun_pn_xmm0501230201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug 15 00:21:40 2012] Fit fullrun_pn_xmm0501230201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug 15 01:00:42 2012] Spatial fit model total counts = 26360.800000, observed total counts = 26200.000000
[Wed Aug 15 01:00:42 2012] Offset between fit and detection position for source 1 = 0.080985 pixels
[Wed Aug 15 01:00:42 2012] 26320.720000 total counts/ 5401.920000 bgd. counts: snr = 284.618217
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.080985 pixels
  Position = (279.1, 285.2) = 0 22 57.40 61 41 7.3
  Extent = 5.9 (5.8-5.9)", rotation angle = 0
  Source counts = 20918.8 +/- 162.2
  Background counts = 5401.9
  Rate = 0.8 +/- 0.007
[Wed Aug 15 01:00:42 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 01:00:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 01:00:42 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 01:00:42 2012] Source does appear to be extended
[Wed Aug 15 01:00:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 01:00:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 01:00:56 2012] Initial guess for spatial extent in simple fitting = 5.88"
[Wed Aug 15 01:00:56 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.168
[Wed Aug 15 01:00:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.88"
[Wed Aug 15 02:24:27 2012] fullrun_pn_xmm0501230201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 15 02:24:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501230201_pi300-10000_cl_pass1_src1.csv
[Wed Aug 15 02:24:27 2012] fullrun_pn_xmm0501230201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 15 02:24:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501230201_pi300-10000_cl_pass1_src1.csv
[Wed Aug 15 02:24:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501230201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501230201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 02:24:28 2012] fullrun_pn_xmm0501230201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 15 02:24:28 2012] fullrun_pn_xmm0501230201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 15 02:24:28 2012] Fit fullrun_pn_xmm0501230201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug 15 03:01:57 2012] Spatial fit model total counts = 26356.900000, observed total counts = 26200.000000
[Wed Aug 15 03:01:57 2012] Offset between fit and detection position for source 1 = 0.000070 pixels
[Wed Aug 15 03:01:57 2012] 26316.950000 total counts/ 5394.950000 bgd. counts: snr = 284.845581
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000070 pixels
  Position = (279.1, 285.2) = 0 22 57.40 61 41 7.3
  Extent = 5.9 (5.8-5.9)", rotation angle = 0
  Source counts = 20922.0 +/- 162.2
  Background counts = 5394.9
  Rate = 0.8 +/- 0.007
[Wed Aug 15 03:01:58 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 03:01:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 03:01:58 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 03:01:58 2012] Source does appear to be extended
[Wed Aug 15 03:01:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 03:02:10 2012] Counts = 20922.000000, rescaling region sizes by 3.000000
[Wed Aug 15 03:02:10 2012] XMMSAS src. selection expression = ellipse(24231.451600, 24760.929200, 1058.569230, 1058.569230, 0.000000, X, Y)
[Wed Aug 15 03:02:10 2012] Writing source region out to fullrun_pn_xmm0501230201_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug 15 03:02:10 2012] Extracting stamp from image fullrun_pn_xmm0501230201_pi300-10000_cl_sm2.00.img.gz, (218, 224) - (340, 346)
[Wed Aug 15 03:02:10 2012] XMMSAS bgd. selection expression = annulus(24231.451600, 24760.929200, 5292.846152, 10585.692305, X, Y) && !ellipse(32496.165360, 26904.657200, 391.080011, 391.080011, 0.000000, X, Y) && !ellipse(25370.001800, 27965.816800, 436.213613, 436.213613, 0.000000, X, Y) && !ellipse(12833.707458, 30381.520905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23561.935000, 27860.334200, 448.260813, 448.260813, 0.000000, X, Y) && !ellipse(23538.052795, 36091.795959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19082.459625, 36171.391083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21605.653442, 35721.610535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33277.663560, 29482.313400, 447.797613, 245.707207, 83.870522, X, Y) && !ellipse(25353.310000, 28580.936000, 373.885611, 373.885611, 0.000000, X, Y) && !ellipse(27552.738525, 28564.376373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35000.966553, 25374.122375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29100.446463, 36568.210807, 1679.336048, 306.928064, 111.757014, X, Y) && !ellipse(28921.453800, 36160.440400, 1679.336048, 524.396815, 112.009900, X, Y) && !ellipse(28609.214000, 35227.032000, 1328.792038, 1328.792038, 0.000000, X, Y) && !ellipse(28517.224440, 35037.248000, 1986.264057, 546.642416, 110.700000, X, Y) && !ellipse(33757.249939, 32940.836395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27477.656000, 32603.866000, 1352.080039, 1352.080039, 0.000000, X, Y) && !ellipse(27291.582000, 32298.832000, 1495.824043, 1495.824043, 0.000000, X, Y) && !ellipse(33860.498718, 31769.822449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27150.097200, 31990.480000, 1414.808041, 1414.808041, 0.000000, X, Y) && !ellipse(26045.547424, 30770.440216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25463.672000, 31072.516000, 1352.352039, 1352.352039, 0.000000, X, Y) && !ellipse(26617.662200, 30525.504000, 412.879212, 310.916809, 80.397000, X, Y) && !ellipse(24637.318400, 29825.518800, 485.106414, 485.106414, 0.000000, X, Y) && !ellipse(27735.046000, 29570.208600, 576.597617, 576.597617, 0.000000, X, Y) && !ellipse(25978.688477, 28821.956696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28137.121094, 27707.542664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25039.486000, 26746.566000, 1104.952032, 1104.952032, 0.000000, X, Y) && !ellipse(24810.196808, 26216.918945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19569.712000, 24838.605000, 503.409614, 503.409614, 0.000000, X, Y) && !ellipse(30840.426788, 24437.454590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26317.541901, 20254.171844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26767.731323, 23159.812012, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 03:02:10 2012] Writing fullrun_pn_xmm0501230201_pi300-10000_pass1_cl_src1.gif
[Wed Aug 15 03:02:32 2012] Mean detx,y = (55.66, -217.19) 
[Wed Aug 15 03:02:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 03:06:31 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 03:06:31 2012] Setting source spectrum file to fullrun_pn_xmm0501230201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 15 03:06:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0501230201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug 15 05:08:29 2012] Updating aperture counts using extracted products
[Wed Aug 15 05:08:29 2012] Error reading totcts from fullrun_pn_xmm0501230201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 15 05:08:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 05:08:29 2012] Using photon index=1.80, rate=0.839, arf fullrun_pn_xmm0501230201_pi300-10000_pass1_cl_src1.arf
[Wed Aug 15 05:08:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 05:08:29 2012] Updating source flux to 1.9e-12
[Wed Aug 15 05:10:53 2012] Reading fit data from xmm0501230201/analysis//spectral/fullrun_pn_xmm0501230201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug 15 05:10:53 2012] Spectral fit parameter nH value = 1.65831e+21
[Wed Aug 15 05:10:53 2012] Spectral fit parameter PhoIndex value = 1.22027
[Wed Aug 15 05:10:53 2012] Failed to get F(0.3-8.0) from xmm0501230201/analysis//spectral/fullrun_pn_xmm0501230201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug 15 05:10:53 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 05:10:53 2012] Using Nh = 1.7e+21, photon index=1.22, rate=0.839, arf fullrun_pn_xmm0501230201_pi300-10000_pass1_cl_src1.arf
[Wed Aug 15 05:10:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 05:10:53 2012] Updating source flux to 3.8e-12