[Tue Aug 14 22:58:12 2012] Detection parameters:
  Position = (290.9, 354.6) = 0 22 50.21 61 46 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.3 +/- 9.4
  Background counts = 11.5
  Rate = 0.002 +/- 0.0004

[Tue Aug 14 22:58:12 2012] Off-axis axis estimate = 4.11'
[Wed Aug 15 00:41:38 2012] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 00:41:38 2012] Initial guess for spatial extent in simple fitting = 8.48"
[Wed Aug 15 00:41:38 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.041
[Wed Aug 15 00:41:38 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 8.48"
[Wed Aug 15 01:00:33 2012] fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_src14.ximg exists
[Wed Aug 15 01:00:33 2012] fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Aug 15 01:00:33 2012] Fit fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_src14 appears to have run properly
[Wed Aug 15 01:00:33 2012] fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Aug 15 01:00:33 2012] fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Aug 15 01:00:33 2012] Fit fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Aug 15 01:00:47 2012] Spatial fit model total counts = 146.222000, observed total counts = 137.000000
[Wed Aug 15 01:00:47 2012] Offset between fit and detection position for source 7 = 0.202173 pixels
[Wed Aug 15 01:00:47 2012] 149.943800 total counts/ 122.008000 bgd. counts: snr = 2.529106
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.202173 pixels
  Position = (290.7, 354.7) = 0 22 50.33 61 46 9.7
  Extent = 3.8 (2.8-5.8)", rotation angle = 0
  Source counts = 27.9 +/- 12.2
  Background counts = 122.0
  Rate = 0.001 +/- 0.0005
[Wed Aug 15 01:00:47 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 01:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 01:00:47 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 01:00:47 2012] Source does appear to be extended
[Wed Aug 15 01:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 02:43:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 02:43:07 2012] Initial guess for spatial extent in simple fitting = 3.80"
[Wed Aug 15 02:43:07 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.192
[Wed Aug 15 02:43:07 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 3.80"
[Wed Aug 15 03:01:49 2012] fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_src13.ximg exists
[Wed Aug 15 03:01:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_src13.csv
[Wed Aug 15 03:01:49 2012] fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Aug 15 03:01:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_src13.csv
[Wed Aug 15 03:01:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 03:01:49 2012] fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Aug 15 03:01:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed Aug 15 03:01:49 2012] fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Aug 15 03:01:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed Aug 15 03:01:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 03:02:02 2012] Spatial fit model total counts = 154.764000, observed total counts = 138.000000
[Wed Aug 15 03:02:02 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 03:02:02 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 03:02:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 03:02:02 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 03:02:02 2012] Source does appear to be extended
[Wed Aug 15 03:02:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 03:02:02 2012] Deleting source due to low Poisson probability 0.9