[Tue Aug 14 22:58:12 2012] Detection parameters:
  Position = (279.2, 285.3) = 0 22 57.34 61 41 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10673.5 +/- 123.0
  Background counts = 14.2
  Rate = 0.4 +/- 0.005

[Tue Aug 14 22:58:12 2012] Off-axis axis estimate = 1.69'
[Wed Aug 15 00:41:38 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 00:41:38 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Aug 15 00:41:38 2012] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.742
[Wed Aug 15 00:41:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed Aug 15 01:00:33 2012] fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug 15 01:00:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_src1.csv
[Wed Aug 15 01:00:33 2012] fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug 15 01:00:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_src1.csv
[Wed Aug 15 01:00:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 01:00:33 2012] fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug 15 01:00:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Aug 15 01:00:33 2012] fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug 15 01:00:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Aug 15 01:00:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501230201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 01:00:47 2012] Source 1 is offset by -6.505974 and -7.416862 pixels which is larger than
2 X fitted extent = 0.836101 x 0.836101, not incorporating fit results
[Wed Aug 15 01:00:47 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 01:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 01:00:47 2012] Assessing source extent using major
[Wed Aug 15 01:00:47 2012] Source does appear to be extended
[Wed Aug 15 01:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 01:00:47 2012] Source is confused with source 2
[Wed Aug 15 02:43:07 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 02:43:07 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Aug 15 02:43:07 2012] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.742
[Wed Aug 15 02:43:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.27"
[Wed Aug 15 03:01:49 2012] fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 15 03:01:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_src1.csv
[Wed Aug 15 03:01:49 2012] fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 15 03:01:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_src1.csv
[Wed Aug 15 03:01:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 03:01:49 2012] fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 15 03:01:49 2012] fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 15 03:01:49 2012] Fit fullrun_mos2_xmm0501230201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug 15 03:02:02 2012] Spatial fit model total counts = 10143.000000, observed total counts = 9499.000000
[Wed Aug 15 03:02:02 2012] Offset between fit and detection position for source 1 = 0.179398 pixels
[Wed Aug 15 03:02:02 2012] 10165.850000 total counts/ 2583.350000 bgd. counts: snr = 149.183501
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.179398 pixels
  Position = (279.1, 285.1) = 0 22 57.37 61 41 7.0
  Extent = 5.1 (5.0-5.2)", rotation angle = 0
  Source counts = 7582.5 +/- 100.8
  Background counts = 2583.3
  Rate = 0.3 +/- 0.004
[Wed Aug 15 03:02:02 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 03:02:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 03:02:02 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 03:02:02 2012] Source does appear to be extended
[Wed Aug 15 03:02:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 04:56:12 2012] Counts = 7582.500000, rescaling region sizes by 2.000000
[Wed Aug 15 04:56:12 2012] XMMSAS src. selection expression = ellipse(24236.359840, 24755.085000, 607.914017, 607.914017, 0.000000, X, Y)
[Wed Aug 15 04:56:12 2012] Writing source region out to fullrun_mos2_xmm0501230201_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug 15 04:56:12 2012] Extracting stamp from image fullrun_mos2_xmm0501230201_pi300-10000_cl_sm2.00.img.gz, (244, 250) - (314, 320)
[Wed Aug 15 04:56:12 2012] XMMSAS bgd. selection expression = annulus(24236.359840, 24755.085000, 2026.380058, 4052.760117, X, Y) && !ellipse(24374.511810, 24624.793457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25364.249840, 27955.778200, 379.393433, 379.393433, 0.000000, X, Y) && !ellipse(23580.062600, 27858.093000, 359.364010, 359.364010, 0.000000, X, Y) && !ellipse(27558.953800, 28515.065600, 301.002409, 301.002409, 0.000000, X, Y) && !ellipse(26821.844720, 23069.504800, 315.043209, 315.043209, 0.000000, X, Y)
[Wed Aug 15 04:56:12 2012] Writing fullrun_mos2_xmm0501230201_pi300-10000_pass1_cl_src1.gif
[Wed Aug 15 04:56:14 2012] Mean detx,y = (99.20, 78.68) 
[Wed Aug 15 04:56:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 04:56:26 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 04:56:26 2012] Setting source spectrum file to fullrun_mos2_xmm0501230201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 15 04:56:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501230201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug 15 05:08:31 2012] Updating aperture counts using extracted products
[Wed Aug 15 05:08:31 2012] Error reading totcts from fullrun_mos2_xmm0501230201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 15 05:08:31 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 05:08:31 2012] Using photon index=1.80, rate=0.286, arf fullrun_mos2_xmm0501230201_pi300-10000_pass1_cl_src1.arf
[Wed Aug 15 05:08:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 05:08:31 2012] Updating source flux to 3.3e-12
[Wed Aug 15 05:09:03 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Wed Aug 15 05:09:03 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Aug 15 05:09:28 2012] Reading fit data from xmm0501230201/analysis//spectral/fullrun_mos2_xmm0501230201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug 15 05:09:28 2012] Spectral fit parameter nH value = 1.50733e+21
[Wed Aug 15 05:09:28 2012] Spectral fit parameter PhoIndex value = 1.1489
[Wed Aug 15 05:09:28 2012] Failed to get F(0.3-8.0) from xmm0501230201/analysis//spectral/fullrun_mos2_xmm0501230201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug 15 05:09:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 05:09:28 2012] Using Nh = 1.5e+21, photon index=1.15, rate=0.286, arf fullrun_mos2_xmm0501230201_pi300-10000_pass1_cl_src1.arf
[Wed Aug 15 05:09:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 05:09:28 2012] Updating source flux to 5.3e-12