[Tue Aug 14 22:57:53 2012] Detection parameters:
  Position = (292.4, 321.9) = 0 22 49.27 61 43 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 289.5 +/- 21.2
  Background counts = 12.7
  Rate = 0.01 +/- 0.0009

[Tue Aug 14 22:57:54 2012] Off-axis axis estimate = 1.76'
[Wed Aug 15 00:21:41 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 00:21:41 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Wed Aug 15 00:21:41 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.052
[Wed Aug 15 00:21:41 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.31"
[Wed Aug 15 00:41:37 2012] fullrun_mos1_xmm0501230201_pi300-10000_cl_pass0_src3.ximg exists
[Wed Aug 15 00:41:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501230201_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 00:41:37 2012] fullrun_mos1_xmm0501230201_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Aug 15 00:41:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501230201_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 00:41:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501230201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501230201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 00:41:37 2012] fullrun_mos1_xmm0501230201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug 15 00:41:37 2012] fullrun_mos1_xmm0501230201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug 15 00:41:37 2012] Fit fullrun_mos1_xmm0501230201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Aug 15 01:00:44 2012] Source 4 is offset by -6.334435 and 6.434567 pixels which is larger than
2 X fitted extent = 0.840051 x 0.840051, not incorporating fit results
[Wed Aug 15 01:00:44 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 01:00:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 01:00:44 2012] Assessing source extent using major
[Wed Aug 15 01:00:44 2012] Source does appear to be extended
[Wed Aug 15 01:00:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 01:00:44 2012] Source is confused with source 11
[Wed Aug 15 02:24:29 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 02:24:29 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Wed Aug 15 02:24:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.052
[Wed Aug 15 02:24:29 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.31"
[Wed Aug 15 02:43:07 2012] fullrun_mos1_xmm0501230201_pi300-10000_cl_pass1_src3.ximg exists
[Wed Aug 15 02:43:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501230201_pi300-10000_cl_pass1_src3.csv
[Wed Aug 15 02:43:07 2012] fullrun_mos1_xmm0501230201_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Aug 15 02:43:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501230201_pi300-10000_cl_pass1_src3.csv
[Wed Aug 15 02:43:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501230201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501230201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 02:43:07 2012] fullrun_mos1_xmm0501230201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug 15 02:43:07 2012] fullrun_mos1_xmm0501230201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug 15 02:43:07 2012] Fit fullrun_mos1_xmm0501230201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Aug 15 03:02:00 2012] Spatial fit model total counts = 457.815000, observed total counts = 456.000000
[Wed Aug 15 03:02:00 2012] Offset between fit and detection position for source 4 = 0.185005 pixels
[Wed Aug 15 03:02:00 2012] 463.432000 total counts/ 292.007000 bgd. counts: snr = 10.031769
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.185005 pixels
  Position = (292.2, 321.9) = 0 22 49.39 61 43 47.2
  Extent = 4.1 (3.6-4.7)", rotation angle = 0
  Source counts = 171.4 +/- 21.5
  Background counts = 292.0
  Rate = 0.006 +/- 0.0008
[Wed Aug 15 03:02:00 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 03:02:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 03:02:00 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 03:02:00 2012] Source does appear to be extended
[Wed Aug 15 03:02:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 04:40:07 2012] XMMSAS src. selection expression = ellipse(25373.243200, 27957.595600, 246.178807, 246.178807, 0.000000, X, Y)
[Wed Aug 15 04:40:07 2012] Writing source region out to fullrun_mos1_xmm0501230201_pi300-10000_pass1_cl_src4_src.reg
[Wed Aug 15 04:40:07 2012] Extracting stamp from image fullrun_mos1_xmm0501230201_pi300-10000_cl_sm2.00.img.gz, (278, 308) - (306, 336)
[Wed Aug 15 04:40:07 2012] XMMSAS bgd. selection expression = annulus(25373.243200, 27957.595600, 410.298012, 820.596024, X, Y) && !ellipse(25214.596000, 28576.990000, 419.134412, 419.134412, 0.000000, X, Y) && !ellipse(24620.224000, 29267.112000, 1211.224035, 1211.224035, 0.000000, X, Y)
[Wed Aug 15 04:40:07 2012] Writing fullrun_mos1_xmm0501230201_pi300-10000_pass1_cl_src4.gif
[Wed Aug 15 04:40:56 2012] Mean detx,y = (-3087.80, -76.60) 
[Wed Aug 15 04:40:57 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 04:41:04 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 04:41:04 2012] Setting source spectrum file to fullrun_mos1_xmm0501230201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Aug 15 04:41:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501230201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Aug 15 05:08:31 2012] Updating aperture counts using extracted products
[Wed Aug 15 05:08:31 2012] Error reading totcts from fullrun_mos1_xmm0501230201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Aug 15 05:08:31 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 05:08:31 2012] Using photon index=1.80, rate=0.00647, arf fullrun_mos1_xmm0501230201_pi300-10000_pass1_cl_src4.arf
[Wed Aug 15 05:08:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 05:08:31 2012] Updating source flux to 9.1e-14
[Wed Aug 15 05:08:32 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Wed Aug 15 05:08:32 2012] Flag c found in src. 4 procflags, skipping spectral fitting