[Tue Jul 10 04:11:23 2012] Detection parameters:
  Position = (221.7, 295.9) = 18 4 10.75 40 10 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.6 +/- 17.1
  Background counts = 15.6
  Rate = 0.01 +/- 0.001

[Tue Jul 10 04:11:23 2012] Off-axis axis estimate = 5.56'
[Tue Jul 10 04:50:04 2012] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 04:50:04 2012] Initial guess for spatial extent in simple fitting = 9.21"
[Tue Jul 10 04:50:04 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.912
[Tue Jul 10 04:50:04 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.21"
[Tue Jul 10 05:07:07 2012] fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jul 10 05:07:07 2012] fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jul 10 05:07:07 2012] Fit fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_src3 appears to have run properly
[Tue Jul 10 05:07:07 2012] fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jul 10 05:07:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jul 10 05:07:07 2012] fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jul 10 05:07:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jul 10 05:07:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 05:31:55 2012] Source 6 is offset by 3.429022 and -8.185470 pixels which is larger than
2 X fitted extent = 7.665517 x 7.665517, not incorporating fit results
[Tue Jul 10 05:31:55 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 05:31:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 05:31:55 2012] Assessing source extent using major
[Tue Jul 10 05:31:55 2012] Source does appear to be extended
[Tue Jul 10 05:31:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 06:11:12 2012] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 06:11:12 2012] Initial guess for spatial extent in simple fitting = 9.21"
[Tue Jul 10 06:11:12 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.912
[Tue Jul 10 06:11:12 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.21"
[Tue Jul 10 06:30:04 2012] fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jul 10 06:30:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_src3.csv
[Tue Jul 10 06:30:04 2012] fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jul 10 06:30:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_src3.csv
[Tue Jul 10 06:30:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 06:30:04 2012] fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jul 10 06:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jul 10 06:30:04 2012] fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jul 10 06:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jul 10 06:30:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 06:53:02 2012] Warning, spatial fit 3 centroid is now closest to src. 7
[Tue Jul 10 06:53:02 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 06:53:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 06:53:02 2012] Assessing source extent using major
[Tue Jul 10 06:53:02 2012] Source does appear to be extended
[Tue Jul 10 06:53:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 07:36:20 2012] XMMSAS src. selection expression = ellipse(19242.749054, 25691.316071, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 10 07:36:20 2012] Writing source region out to fullrun_mos1_xmm0501230101_pi300-10000_pass1_cl_src6_src.reg
[Tue Jul 10 07:36:20 2012] Extracting stamp from image fullrun_mos1_xmm0501230101_pi300-10000_cl_sm2.00.img.gz, (184, 258) - (259, 333)
[Tue Jul 10 07:36:20 2012] XMMSAS bgd. selection expression = annulus(19242.749054, 25691.316071, 1087.500000, 2175.000000, X, Y) && !ellipse(21517.430801, 24643.089264, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 10 07:36:20 2012] Writing fullrun_mos1_xmm0501230101_pi300-10000_pass1_cl_src6.gif
[Tue Jul 10 07:36:43 2012] Mean detx,y = (734.38, -7694.97) 
[Tue Jul 10 07:36:44 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 07:37:02 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 07:37:02 2012] Setting source spectrum file to fullrun_mos1_xmm0501230101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jul 10 07:37:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501230101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jul 10 07:47:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 10 07:47:53 2012] rmf not generated due to insufficient counts
[Tue Jul 10 08:06:01 2012] Updating aperture counts using extracted products
[Tue Jul 10 08:06:01 2012] Error reading totcts from fullrun_mos1_xmm0501230101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jul 10 08:06:01 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 08:06:01 2012] Using photon index=1.80, rate=0.0133, arf fullrun_mos1_xmm0501230101_pi300-10000_pass1_cl_src6.arf
[Tue Jul 10 08:06:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 08:06:01 2012] Updating source flux to 2e-13
[Tue Jul 10 08:06:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting