[Tue Jul 10 04:11:23 2012] Detection parameters:
  Position = (303.4, 321.7) = 18 3 39.77 40 12 19.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3722.3 +/- 73.3
  Background counts = 17.4
  Rate = 0.2 +/- 0.003

[Tue Jul 10 04:11:23 2012] Off-axis axis estimate = 1.73'
[Tue Jul 10 04:50:04 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 04:50:04 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Jul 10 04:50:04 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Tue Jul 10 04:50:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue Jul 10 05:07:07 2012] fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 10 05:07:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_src1.csv
[Tue Jul 10 05:07:07 2012] fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 10 05:07:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_src1.csv
[Tue Jul 10 05:07:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 05:07:07 2012] fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 10 05:07:07 2012] fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 10 05:07:07 2012] Fit fullrun_mos1_xmm0501230101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul 10 05:31:55 2012] Spatial fit model total counts = 3180.100000, observed total counts = 3176.000000
[Tue Jul 10 05:31:55 2012] Offset between fit and detection position for source 1 = 0.229672 pixels
[Tue Jul 10 05:31:55 2012] 3180.029000 total counts/ 757.499000 bgd. counts: snr = 88.019345
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.229672 pixels
  Position = (303.2, 321.5) = 18 3 39.82 40 12 19.0
  Extent = 5.2 (5.0-5.3)", rotation angle = 0
  Source counts = 2422.5 +/- 56.4
  Background counts = 757.5
  Rate = 0.1 +/- 0.003
[Tue Jul 10 05:31:55 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 05:31:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 05:31:55 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 05:31:55 2012] Source does appear to be extended
[Tue Jul 10 05:31:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 06:11:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 10 06:11:12 2012] Initial guess for spatial extent in simple fitting = 5.16"
[Tue Jul 10 06:11:12 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.792
[Tue Jul 10 06:11:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.16"
[Tue Jul 10 06:30:04 2012] fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul 10 06:30:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_src1.csv
[Tue Jul 10 06:30:04 2012] fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul 10 06:30:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_src1.csv
[Tue Jul 10 06:30:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 06:30:04 2012] fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul 10 06:30:04 2012] fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul 10 06:30:04 2012] Fit fullrun_mos1_xmm0501230101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jul 10 06:53:02 2012] Spatial fit model total counts = 3179.750000, observed total counts = 3181.000000
[Tue Jul 10 06:53:02 2012] Offset between fit and detection position for source 1 = 0.005469 pixels
[Tue Jul 10 06:53:02 2012] 3187.514000 total counts/ 763.954000 bgd. counts: snr = 87.683963
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.005469 pixels
  Position = (303.2, 321.5) = 18 3 39.82 40 12 19.0
  Extent = 5.2 (5.0-5.3)", rotation angle = 0
  Source counts = 2423.6 +/- 56.5
  Background counts = 764.0
  Rate = 0.1 +/- 0.003
[Tue Jul 10 06:53:02 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 06:53:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 06:53:02 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 06:53:02 2012] Source does appear to be extended
[Tue Jul 10 06:53:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 07:36:20 2012] Counts = 2423.560000, rescaling region sizes by 2.000000
[Tue Jul 10 07:36:20 2012] XMMSAS src. selection expression = ellipse(26331.857760, 27925.539000, 620.869218, 620.869218, 0.000000, X, Y)
[Tue Jul 10 07:36:20 2012] Writing source region out to fullrun_mos1_xmm0501230101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul 10 07:36:20 2012] Extracting stamp from image fullrun_mos1_xmm0501230101_pi300-10000_cl_sm2.00.img.gz, (268, 286) - (339, 357)
[Tue Jul 10 07:36:20 2012] XMMSAS bgd. selection expression = annulus(26331.857760, 27925.539000, 2069.564060, 4139.128119, X, Y) && !ellipse(21517.430801, 24643.089264, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 10 07:36:20 2012] Writing fullrun_mos1_xmm0501230101_pi300-10000_pass1_cl_src1.gif
[Tue Jul 10 07:36:22 2012] Mean detx,y = (327.68, -271.80) 
[Tue Jul 10 07:36:22 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 07:36:33 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 07:36:33 2012] Setting source spectrum file to fullrun_mos1_xmm0501230101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 10 07:36:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501230101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jul 10 08:06:01 2012] Updating aperture counts using extracted products
[Tue Jul 10 08:06:01 2012] Error reading totcts from fullrun_mos1_xmm0501230101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 10 08:06:01 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 08:06:01 2012] Using photon index=1.80, rate=0.117, arf fullrun_mos1_xmm0501230101_pi300-10000_pass1_cl_src1.arf
[Tue Jul 10 08:06:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 08:06:01 2012] Updating source flux to 1.1e-12
[Tue Jul 10 08:06:21 2012] Reading fit data from xmm0501230101/analysis//spectral/fullrun_mos1_xmm0501230101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jul 10 08:06:21 2012] Spectral fit parameter nH value = 2.82664e+14
[Tue Jul 10 08:06:21 2012] Spectral fit parameter PhoIndex value = 1.68332
[Tue Jul 10 08:06:21 2012] Failed to get F(0.3-8.0) from xmm0501230101/analysis//spectral/fullrun_mos1_xmm0501230101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jul 10 08:06:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 08:06:21 2012] Using Nh = 2.8e+14, photon index=1.68, rate=0.117, arf fullrun_mos1_xmm0501230101_pi300-10000_pass1_cl_src1.arf
[Tue Jul 10 08:06:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 08:06:21 2012] Updating source flux to 1.2e-12