[Tue May 28 16:30:25 2013] Detection parameters:
  Position = (243.0, 270.0) = 4 6 0.82 -43 45 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.6 +/- 12.7
  Background counts = 45.4
  Rate = 0.004 +/- 0.0008

[Tue May 28 16:30:26 2013] Off-axis axis estimate = 4.52'
[Tue May 28 16:33:09 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Tue May 28 16:33:09 2013] Initial guess for spatial extent in simple fitting = 8.69"
[Tue May 28 16:33:09 2013] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.762
[Tue May 28 16:33:09 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 8.69"
[Tue May 28 17:21:29 2013] fullrun_pn_xmm0501210701_pi300-10000_cl_pass0_src27.ximg exists
[Tue May 28 17:21:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210701_pi300-10000_cl_pass0_src27.csv
[Tue May 28 17:21:29 2013] fullrun_pn_xmm0501210701_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue May 28 17:21:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210701_pi300-10000_cl_pass0_src27.csv
[Tue May 28 17:21:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210701_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210701_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 17:21:29 2013] fullrun_pn_xmm0501210701_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue May 28 17:21:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210701_pi300-10000_cl_pass0_tfrozen_src27.csv
[Tue May 28 17:21:29 2013] fullrun_pn_xmm0501210701_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue May 28 17:21:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210701_pi300-10000_cl_pass0_tfrozen_src27.csv
[Tue May 28 17:21:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210701_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210701_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 18:08:31 2013] Spatial fit model total counts = 296.630000, observed total counts = 243.000000
[Tue May 28 18:08:31 2013] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 18:08:31 2013] Vigneting correction estimate = 1.000000
[Tue May 28 18:08:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 18:08:31 2013] Assessing source extent using major
[Tue May 28 18:08:31 2013] Source does appear to be extended
[Tue May 28 18:08:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 18:08:44 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Tue May 28 18:08:44 2013] Initial guess for spatial extent in simple fitting = 8.69"
[Tue May 28 18:08:44 2013] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.762
[Tue May 28 18:08:44 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 8.69"
[Tue May 28 18:52:07 2013] fullrun_pn_xmm0501210701_pi300-10000_cl_pass1_src26.ximg exists
[Tue May 28 18:52:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210701_pi300-10000_cl_pass1_src26.csv
[Tue May 28 18:52:07 2013] fullrun_pn_xmm0501210701_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue May 28 18:52:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210701_pi300-10000_cl_pass1_src26.csv
[Tue May 28 18:52:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210701_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210701_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 18:52:08 2013] fullrun_pn_xmm0501210701_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue May 28 18:52:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210701_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue May 28 18:52:08 2013] fullrun_pn_xmm0501210701_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue May 28 18:52:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210701_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue May 28 18:52:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210701_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210701_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 19:37:24 2013] Source 28 is offset by -3.714127 and -8.287533 pixels which is larger than
2 X fitted extent = 0.998675 x 0.998675, not incorporating fit results
[Tue May 28 19:37:24 2013] Vigneting correction estimate = 1.000000
[Tue May 28 19:37:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 19:37:24 2013] Assessing source extent using major
[Tue May 28 19:37:24 2013] Source does appear to be extended
[Tue May 28 19:37:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 19:37:39 2013] XMMSAS src. selection expression = ellipse(21088.944916, 23445.158630, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 28 19:37:39 2013] Writing source region out to fullrun_pn_xmm0501210701_pi300-10000_pass1_cl_src28_src.reg
[Tue May 28 19:37:39 2013] Extracting stamp from image fullrun_pn_xmm0501210701_pi300-10000_cl_sm2.00.img.gz, (205, 233) - (280, 308)
[Tue May 28 19:37:39 2013] XMMSAS bgd. selection expression = annulus(21088.944916, 23445.158630, 1087.500000, 2175.000000, X, Y) && !ellipse(20837.275440, 21816.909800, 400.060812, 400.060812, 0.000000, X, Y)
[Tue May 28 19:37:39 2013] Writing fullrun_pn_xmm0501210701_pi300-10000_pass1_cl_src28.gif
[Tue May 28 19:52:37 2013] Mean detx,y = (225.77, -3798.25) 
[Tue May 28 19:52:39 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 19:52:53 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 19:52:53 2013] Setting source spectrum file to fullrun_pn_xmm0501210701_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue May 28 19:52:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0501210701_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue May 28 20:19:46 2013] Not generating rmf since there are only 72 counts
[Tue May 28 20:19:46 2013] rmf not generated due to insufficient counts
[Tue May 28 20:48:24 2013] Updating aperture counts using extracted products
[Tue May 28 20:48:24 2013] Total counts from fullrun_pn_xmm0501210701_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 179.00
[Tue May 28 20:48:24 2013] Total counts from fullrun_pn_xmm0501210701_pi300-10000_pass1_cl_src28_bgd.pi.gz = 1410.00
[Tue May 28 20:48:24 2013] Got source and background scale factors 1072920.000000, 10099023.000000
[Tue May 28 20:48:24 2013] User source parameters:
  Position = (243.0, 270.0) = 4 6 0.82 -43 45 6.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 29.2 +/- 14.4
  Background aperture counts = 149.8
  Rate = 0.001 +/- 0.0007

[Tue May 28 20:48:24 2013] Updating counts from extracted products
[Tue May 28 20:48:24 2013] Set source signif. to 29.20/12.24 = 2.39
[Tue May 28 20:48:26 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 20:48:26 2013] Using photon index=1.80, rate=0.00134, arf fullrun_pn_xmm0501210701_pi300-10000_pass1_cl_src28.arf
[Tue May 28 20:48:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 20:48:26 2013] Updating source flux to 4.6e-15
[Tue May 28 20:48:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 28 20:48:41 2013] xmm0501210701/analysis//spectral/fullrun_pn_xmm0501210701_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete