[Tue May 28 16:31:15 2013] Detection parameters:
  Position = (339.2, 347.9) = 4 5 22.19 -43 39 29.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.5 +/- 9.0
  Background counts = 14.8
  Rate = 0.003 +/- 0.0005

[Tue May 28 16:31:16 2013] Off-axis axis estimate = 4.65'
[Tue May 28 17:37:49 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Tue May 28 17:37:49 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Tue May 28 17:37:49 2013] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.713
[Tue May 28 17:37:49 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 8.75"
[Tue May 28 18:08:24 2013] fullrun_mos2_xmm0501210701_pi300-10000_cl_pass0_src14.ximg exists
[Tue May 28 18:08:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210701_pi300-10000_cl_pass0_src14.csv
[Tue May 28 18:08:24 2013] fullrun_mos2_xmm0501210701_pi300-10000_cl_pass0_src14_1.ximg exists
[Tue May 28 18:08:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210701_pi300-10000_cl_pass0_src14.csv
[Tue May 28 18:08:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210701_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210701_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 18:08:24 2013] fullrun_mos2_xmm0501210701_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Tue May 28 18:08:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210701_pi300-10000_cl_pass0_tfrozen_src14.csv
[Tue May 28 18:08:24 2013] fullrun_mos2_xmm0501210701_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Tue May 28 18:08:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210701_pi300-10000_cl_pass0_tfrozen_src14.csv
[Tue May 28 18:08:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210701_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210701_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 18:08:35 2013] Spatial fit model total counts = 167.286000, observed total counts = 132.000000
[Tue May 28 18:08:35 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 18:08:35 2013] Vigneting correction estimate = 1.000000
[Tue May 28 18:08:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 18:08:35 2013] Assessing source extent using major
[Tue May 28 18:08:35 2013] Source does appear to be extended
[Tue May 28 18:08:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 19:08:50 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Tue May 28 19:08:50 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Tue May 28 19:08:50 2013] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.713
[Tue May 28 19:08:50 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 8.75"
[Tue May 28 19:37:18 2013] fullrun_mos2_xmm0501210701_pi300-10000_cl_pass1_src14.ximg exists
[Tue May 28 19:37:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210701_pi300-10000_cl_pass1_src14.csv
[Tue May 28 19:37:18 2013] fullrun_mos2_xmm0501210701_pi300-10000_cl_pass1_src14_1.ximg exists
[Tue May 28 19:37:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210701_pi300-10000_cl_pass1_src14.csv
[Tue May 28 19:37:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210701_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210701_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 19:37:18 2013] fullrun_mos2_xmm0501210701_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Tue May 28 19:37:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210701_pi300-10000_cl_pass1_tfrozen_src14.csv
[Tue May 28 19:37:18 2013] fullrun_mos2_xmm0501210701_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Tue May 28 19:37:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210701_pi300-10000_cl_pass1_tfrozen_src14.csv
[Tue May 28 19:37:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210701_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210701_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 19:37:30 2013] Source 13 is offset by -8.019556 and -5.411890 pixels which is larger than
2 X fitted extent = 1.092175 x 1.092175, not incorporating fit results
[Tue May 28 19:37:30 2013] Spatial fit model total counts = 167.272000, observed total counts = 132.000000
[Tue May 28 19:37:30 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 19:37:30 2013] Vigneting correction estimate = 1.000000
[Tue May 28 19:37:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 19:37:30 2013] Assessing source extent using major
[Tue May 28 19:37:30 2013] Source does appear to be extended
[Tue May 28 19:37:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 20:30:20 2013] XMMSAS src. selection expression = ellipse(29465.644653, 30214.511597, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 28 20:30:20 2013] Writing source region out to fullrun_mos2_xmm0501210701_pi300-10000_pass1_cl_src13_src.reg
[Tue May 28 20:30:20 2013] Extracting stamp from image fullrun_mos2_xmm0501210701_pi300-10000_cl_sm2.00.img.gz, (302, 310) - (377, 385)
[Tue May 28 20:30:20 2013] XMMSAS bgd. selection expression = annulus(29465.644653, 30214.511597, 1087.500000, 2175.000000, X, Y) && !ellipse(27492.137800, 27674.993200, 470.693937, 470.693937, 0.000000, X, Y) && !ellipse(30922.167175, 31332.085114, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 28 20:30:20 2013] Writing fullrun_mos2_xmm0501210701_pi300-10000_pass1_cl_src13.gif
[Tue May 28 20:33:53 2013] Mean detx,y = (344.76, -7223.00) 
[Tue May 28 20:33:54 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 20:34:22 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 20:34:22 2013] Setting source spectrum file to fullrun_mos2_xmm0501210701_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue May 28 20:34:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0501210701_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue May 28 20:42:30 2013] Not generating rmf since there are only 47 counts
[Tue May 28 20:42:30 2013] rmf not generated due to insufficient counts
[Tue May 28 20:48:30 2013] Updating aperture counts using extracted products
[Tue May 28 20:48:30 2013] Total counts from fullrun_mos2_xmm0501210701_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 92.00
[Tue May 28 20:48:30 2013] Total counts from fullrun_mos2_xmm0501210701_pi300-10000_pass1_cl_src13_bgd.pi.gz = 509.00
[Tue May 28 20:48:30 2013] Got source and background scale factors 902098.000000, 8490803.000000
[Tue May 28 20:48:30 2013] User source parameters:
  Position = (339.2, 347.9) = 4 5 22.19 -43 39 29.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 37.9 +/- 10.6
  Background aperture counts = 54.1
  Rate = 0.001 +/- 0.0004

[Tue May 28 20:48:30 2013] Updating counts from extracted products
[Tue May 28 20:48:30 2013] Set source signif. to 37.92/7.35 = 5.16
[Tue May 28 20:48:31 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 20:48:31 2013] Using photon index=1.80, rate=0.00145, arf fullrun_mos2_xmm0501210701_pi300-10000_pass1_cl_src13.arf
[Tue May 28 20:48:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 20:48:31 2013] Updating source flux to 2.4e-14
[Tue May 28 20:48:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 28 20:48:36 2013] xmm0501210701/analysis//spectral/fullrun_mos2_xmm0501210701_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete