[Sat Jul 21 06:07:54 2012] Detection parameters:
  Position = (208.9, 418.7) = 5 28 25.39 14 48 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.8 +/- 11.0
  Background counts = 12.2
  Rate = 0.003 +/- 0.0004

[Sat Jul 21 06:07:54 2012] Off-axis axis estimate = 10.87'
[Sat Jul 21 06:22:40 2012] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 06:22:40 2012] Initial guess for spatial extent in simple fitting = 11.86"
[Sat Jul 21 06:22:40 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.008
[Sat Jul 21 06:22:40 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 11.86"
[Sat Jul 21 06:36:25 2012] fullrun_mos1_xmm0501210601_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jul 21 06:36:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210601_pi300-10000_cl_pass0_src6.csv
[Sat Jul 21 06:36:25 2012] fullrun_mos1_xmm0501210601_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jul 21 06:36:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210601_pi300-10000_cl_pass0_src6.csv
[Sat Jul 21 06:36:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501210601_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501210601_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 06:36:25 2012] fullrun_mos1_xmm0501210601_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jul 21 06:36:25 2012] fullrun_mos1_xmm0501210601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jul 21 06:36:25 2012] Fit fullrun_mos1_xmm0501210601_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Jul 21 06:49:04 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.200151 pixels away
[Sat Jul 21 06:49:04 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 06:49:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 06:49:04 2012] Assessing source extent using major
[Sat Jul 21 06:49:04 2012] Source does appear to be extended
[Sat Jul 21 06:49:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 07:17:24 2012] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 07:17:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 21 07:17:24 2012] Initial guess for spatial extent in simple fitting = 11.86"
[Sat Jul 21 07:17:24 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.008
[Sat Jul 21 07:17:24 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.86"
[Sat Jul 21 07:29:35 2012] fullrun_mos1_xmm0501210601_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jul 21 07:29:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210601_pi300-10000_cl_pass1_src5.csv
[Sat Jul 21 07:29:35 2012] fullrun_mos1_xmm0501210601_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jul 21 07:29:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210601_pi300-10000_cl_pass1_src5.csv
[Sat Jul 21 07:29:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501210601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501210601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 07:29:35 2012] fullrun_mos1_xmm0501210601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jul 21 07:29:35 2012] fullrun_mos1_xmm0501210601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jul 21 07:29:35 2012] Fit fullrun_mos1_xmm0501210601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jul 21 07:42:54 2012] Spatial fit model total counts = 221.221000, observed total counts = 221.000000
[Sat Jul 21 07:42:54 2012] Offset between fit and detection position for source 2 = 0.154628 pixels
[Sat Jul 21 07:42:54 2012] 218.848500 total counts/ 187.040000 bgd. counts: snr = 2.325819
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.154628 pixels
  Position = (208.8, 418.8) = 5 28 25.43 14 48 52.3
  Extent = 3.6 (3.0-5.3)", rotation angle = 0
  Source counts = 31.8 +/- 14.8
  Background counts = 187.0
  Rate = 0.001 +/- 0.0006
[Sat Jul 21 07:42:54 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 07:42:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 07:42:54 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 07:42:54 2012] Source does appear to be extended
[Sat Jul 21 07:42:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 07:53:38 2012] XMMSAS src. selection expression = ellipse(18113.111000, 36383.066800, 214.121537, 214.121537, 0.000000, X, Y)
[Sat Jul 21 07:53:38 2012] Writing source region out to fullrun_mos1_xmm0501210601_pi300-10000_pass1_cl_src2_src.reg
[Sat Jul 21 07:53:38 2012] Extracting stamp from image fullrun_mos1_xmm0501210601_pi300-10000_cl_sm2.00.img.gz, (196, 406) - (221, 431)
[Sat Jul 21 07:53:38 2012] XMMSAS bgd. selection expression = annulus(18113.111000, 36383.066800, 356.869228, 713.738456, X, Y)
[Sat Jul 21 07:53:38 2012] Writing fullrun_mos1_xmm0501210601_pi300-10000_pass1_cl_src2.gif
[Sat Jul 21 07:54:27 2012] Mean detx,y = (-11047.19, 7418.30) 
[Sat Jul 21 07:54:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 07:54:34 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 07:54:34 2012] Setting source spectrum file to fullrun_mos1_xmm0501210601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 21 07:54:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501210601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jul 21 07:56:18 2012] Not generating rmf since there are only 31 counts
[Sat Jul 21 07:56:18 2012] rmf not generated due to insufficient counts
[Sat Jul 21 08:03:59 2012] Updating aperture counts using extracted products
[Sat Jul 21 08:03:59 2012] Error reading totcts from fullrun_mos1_xmm0501210601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 21 08:03:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 08:03:59 2012] Using photon index=1.80, rate=0.00123, arf fullrun_mos1_xmm0501210601_pi300-10000_pass1_cl_src2.arf
[Sat Jul 21 08:03:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 08:03:59 2012] Updating source flux to 3.4e-14
[Sat Jul 21 08:04:00 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jul 21 08:04:01 2012] xmm0501210601/analysis//spectral/fullrun_mos1_xmm0501210601_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete