[Wed Jul 25 22:02:21 2012] Detection parameters:
  Position = (287.2, 276.2) = 8 23 1.09 -4 56 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1919.3 +/- 52.5
  Background counts = 11.6
  Rate = 0.2 +/- 0.006

[Wed Jul 25 22:02:21 2012] Off-axis axis estimate = 1.81'
[Wed Jul 25 22:03:46 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 22:03:46 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Wed Jul 25 22:03:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.837
[Wed Jul 25 22:03:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.33"
[Wed Jul 25 22:32:09 2012] fullrun_pn_xmm0501210501_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 25 22:32:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210501_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 22:32:09 2012] fullrun_pn_xmm0501210501_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 25 22:32:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210501_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 22:32:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 22:32:09 2012] fullrun_pn_xmm0501210501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 25 22:32:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 25 22:32:09 2012] fullrun_pn_xmm0501210501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 25 22:32:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 25 22:32:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 23:02:42 2012] Warning, spatial fit 1 centroid is now closest to src. 13
[Wed Jul 25 23:02:42 2012] Spatial fit model total counts = 438.963000, observed total counts = 437.000000
[Wed Jul 25 23:02:42 2012] Offset between fit and detection position for source 1 = 2.316114 pixels
[Wed Jul 25 23:02:42 2012] Warning, changing simple spatial fit ID from 1 to 11
[Wed Jul 25 23:02:42 2012] 445.915000 total counts/ 247.212000 bgd. counts: snr = 12.637747
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.316114 pixels
  Position = (284.9, 276.5) = 8 23 1.76 -4 56 4.0
  Extent = 7.2 (6.1-8.5)", rotation angle = 0
  Source counts = 198.7 +/- 21.1
  Background counts = 247.2
  Rate = 0.02 +/- 0.002
[Wed Jul 25 23:02:42 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 23:02:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 23:02:42 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 23:02:42 2012] Source does appear to be extended
[Wed Jul 25 23:02:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 23:02:42 2012] Source is confused with source 13
[Wed Jul 25 23:02:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 25 23:02:52 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Wed Jul 25 23:02:52 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.078
[Wed Jul 25 23:02:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.20"
[Wed Jul 25 23:32:02 2012] fullrun_pn_xmm0501210501_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 25 23:32:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210501_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 23:32:02 2012] fullrun_pn_xmm0501210501_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 25 23:32:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210501_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 23:32:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 23:32:02 2012] fullrun_pn_xmm0501210501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 25 23:32:02 2012] fullrun_pn_xmm0501210501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 25 23:32:02 2012] Fit fullrun_pn_xmm0501210501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul 26 00:03:33 2012] Spatial fit model total counts = 1844.470000, observed total counts = 1827.000000
[Thu Jul 26 00:03:33 2012] Offset between fit and detection position for source 1 = 2.210767 pixels
[Thu Jul 26 00:03:33 2012] 1839.953000 total counts/ 492.883000 bgd. counts: snr = 60.676182
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.210767 pixels
  Position = (287.1, 276.3) = 8 23 1.12 -4 56 4.7
  Extent = 5.7 (5.5-6.0)", rotation angle = 0
  Source counts = 1347.1 +/- 42.9
  Background counts = 492.9
  Rate = 0.1 +/- 0.004
[Thu Jul 26 00:03:33 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 00:03:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 00:03:33 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 00:03:33 2012] Source does appear to be extended
[Thu Jul 26 00:03:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 00:03:44 2012] Counts = 1347.070000, rescaling region sizes by 2.000000
[Thu Jul 26 00:03:44 2012] XMMSAS src. selection expression = ellipse(24926.166000, 23991.044000, 689.547620, 689.547620, 0.000000, X, Y)
[Thu Jul 26 00:03:44 2012] Writing source region out to fullrun_pn_xmm0501210501_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul 26 00:03:44 2012] Extracting stamp from image fullrun_pn_xmm0501210501_pi300-10000_cl_sm2.00.img.gz, (247, 237) - (327, 316)
[Thu Jul 26 00:03:44 2012] XMMSAS bgd. selection expression = annulus(24926.166000, 23991.044000, 2298.492066, 4596.984132, X, Y) && !ellipse(24195.748688, 24128.897705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27500.864563, 24143.049011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25870.819946, 24144.785400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29101.827160, 22144.603000, 385.277611, 385.277611, 0.000000, X, Y) && !ellipse(22845.164490, 19114.693008, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 00:03:44 2012] Writing fullrun_pn_xmm0501210501_pi300-10000_pass1_cl_src1.gif
[Thu Jul 26 00:03:51 2012] Mean detx,y = (170.70, -313.16) 
[Thu Jul 26 00:03:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 00:04:43 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 00:04:43 2012] Setting source spectrum file to fullrun_pn_xmm0501210501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 26 00:04:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0501210501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul 26 00:35:16 2012] Updating aperture counts using extracted products
[Thu Jul 26 00:35:16 2012] Error reading totcts from fullrun_pn_xmm0501210501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 26 00:35:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 00:35:17 2012] Using photon index=1.80, rate=0.134, arf fullrun_pn_xmm0501210501_pi300-10000_pass1_cl_src1.arf
[Thu Jul 26 00:35:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 00:35:17 2012] Updating source flux to 3.4e-13
[Thu Jul 26 00:35:30 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Jul 26 00:35:36 2012] Reading fit data from xmm0501210501/analysis//spectral/fullrun_pn_xmm0501210501_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jul 26 00:35:36 2012] Spectral fit parameter nH value = 1.81832e+12
[Thu Jul 26 00:35:36 2012] Spectral fit parameter PhoIndex value = -1.19945
[Thu Jul 26 00:35:36 2012] Failed to get F(0.3-8.0) from xmm0501210501/analysis//spectral/fullrun_pn_xmm0501210501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jul 26 00:35:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 00:35:36 2012] Using Nh = 1.8e+12, photon index=-1.20, rate=0.134, arf fullrun_pn_xmm0501210501_pi300-10000_pass1_cl_src1.arf
[Thu Jul 26 00:35:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 00:35:36 2012] Updating source flux to 1.2e-12