[Wed Jul 25 22:02:58 2012] Detection parameters:
  Position = (186.7, 337.1) = 8 23 30.32 -4 51 38.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.7 +/- 6.9
  Background counts = 3.8
  Rate = 0.004 +/- 0.0009

[Wed Jul 25 22:02:58 2012] Off-axis axis estimate = 8.57'
[Wed Jul 25 22:46:02 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 22:46:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 25 22:46:02 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Wed Jul 25 22:46:02 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.025
[Wed Jul 25 22:46:02 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.71"
[Wed Jul 25 23:02:37 2012] fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jul 25 23:02:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_src5.csv
[Wed Jul 25 23:02:37 2012] fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jul 25 23:02:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_src5.csv
[Wed Jul 25 23:02:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 23:02:38 2012] fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jul 25 23:02:38 2012] fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jul 25 23:02:38 2012] Fit fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jul 25 23:02:46 2012] Spatial fit model total counts = 56.087900, observed total counts = 52.000000
[Wed Jul 25 23:02:46 2012] Offset between fit and detection position for source 6 = 0.211683 pixels
[Wed Jul 25 23:02:46 2012] 54.777100 total counts/ 40.610400 bgd. counts: snr = 2.223054
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.211683 pixels
  Position = (186.6, 337.3) = 8 23 30.36 -4 51 39.5
  Extent = 3.5 (2.7-6.6)", rotation angle = 0
  Source counts = 14.2 +/- 7.4
  Background counts = 40.6
  Rate = 0.001 +/- 0.0006
[Wed Jul 25 23:02:46 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 23:02:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 23:02:46 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 23:02:46 2012] Source does appear to be extended
[Wed Jul 25 23:02:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 23:45:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 25 23:45:09 2012] Initial guess for spatial extent in simple fitting = 3.45"
[Wed Jul 25 23:45:09 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.344
[Wed Jul 25 23:45:09 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 3.45"
[Thu Jul 26 00:03:29 2012] fullrun_mos2_xmm0501210501_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jul 26 00:03:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210501_pi300-10000_cl_pass1_src5.csv
[Thu Jul 26 00:03:29 2012] fullrun_mos2_xmm0501210501_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jul 26 00:03:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210501_pi300-10000_cl_pass1_src5.csv
[Thu Jul 26 00:03:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 00:03:29 2012] fullrun_mos2_xmm0501210501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jul 26 00:03:29 2012] fullrun_mos2_xmm0501210501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jul 26 00:03:29 2012] Fit fullrun_mos2_xmm0501210501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Jul 26 00:03:37 2012] Spatial fit model total counts = 54.636200, observed total counts = 53.000000
[Thu Jul 26 00:03:37 2012] Offset between fit and detection position for source 6 = 0.022892 pixels
[Thu Jul 26 00:03:37 2012] 53.730300 total counts/ 39.241500 bgd. counts: snr = 2.312915
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.022892 pixels
  Position = (186.6, 337.3) = 8 23 30.36 -4 51 39.4
  Extent = 3.3 (1.0-6.9)", rotation angle = 0
  Source counts = 14.5 +/- 7.3
  Background counts = 39.2
  Rate = 0.001 +/- 0.0006
[Thu Jul 26 00:03:37 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 00:03:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 00:03:37 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 00:03:37 2012] Source does appear to be extended
[Thu Jul 26 00:03:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 00:31:34 2012] XMMSAS src. selection expression = ellipse(16185.246600, 29297.499200, 195.854406, 195.854406, 0.000000, X, Y)
[Thu Jul 26 00:31:34 2012] Writing source region out to fullrun_mos2_xmm0501210501_pi300-10000_pass1_cl_src6_src.reg
[Thu Jul 26 00:31:34 2012] Extracting stamp from image fullrun_mos2_xmm0501210501_pi300-10000_cl_sm2.00.img.gz, (175, 326) - (198, 349)
[Thu Jul 26 00:31:34 2012] XMMSAS bgd. selection expression = annulus(16185.246600, 29297.499200, 326.424009, 652.848019, X, Y)
[Thu Jul 26 00:31:34 2012] Writing fullrun_mos2_xmm0501210501_pi300-10000_pass1_cl_src6.gif
[Thu Jul 26 00:32:11 2012] Mean detx,y = (-8089.12, -6131.75) 
[Thu Jul 26 00:32:12 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 00:32:18 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 00:32:18 2012] Setting source spectrum file to fullrun_mos2_xmm0501210501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jul 26 00:32:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501210501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Jul 26 00:34:32 2012] Not generating rmf since there are only 14 counts
[Thu Jul 26 00:34:32 2012] rmf not generated due to insufficient counts
[Thu Jul 26 00:35:17 2012] Updating aperture counts using extracted products
[Thu Jul 26 00:35:17 2012] Error reading totcts from fullrun_mos2_xmm0501210501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jul 26 00:35:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 00:35:17 2012] Using photon index=1.80, rate=0.00125, arf fullrun_mos2_xmm0501210501_pi300-10000_pass1_cl_src6.arf
[Thu Jul 26 00:35:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 00:35:17 2012] Updating source flux to 3.2e-14
[Thu Jul 26 00:35:29 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jul 26 00:35:30 2012] xmm0501210501/analysis//spectral/fullrun_mos2_xmm0501210501_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete