[Wed Jul 25 22:02:57 2012] Detection parameters:
  Position = (356.6, 259.0) = 8 22 40.87 -4 57 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.6 +/- 11.4
  Background counts = 3.8
  Rate = 0.01 +/- 0.001

[Wed Jul 25 22:02:58 2012] Off-axis axis estimate = 5.10'
[Wed Jul 25 22:46:02 2012] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 22:46:02 2012] Initial guess for spatial extent in simple fitting = 8.98"
[Wed Jul 25 22:46:02 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.141
[Wed Jul 25 22:46:02 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.98"
[Wed Jul 25 23:02:37 2012] fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jul 25 23:02:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_src2.csv
[Wed Jul 25 23:02:37 2012] fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jul 25 23:02:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_src2.csv
[Wed Jul 25 23:02:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 23:02:38 2012] fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jul 25 23:02:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jul 25 23:02:38 2012] fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jul 25 23:02:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jul 25 23:02:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210501_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 23:02:46 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.997026 pixels away
[Wed Jul 25 23:02:46 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 23:02:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 23:02:46 2012] Assessing source extent using major
[Wed Jul 25 23:02:46 2012] Source does appear to be extended
[Wed Jul 25 23:02:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 23:45:09 2012] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 23:45:09 2012] Initial guess for spatial extent in simple fitting = 8.98"
[Wed Jul 25 23:45:09 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.141
[Wed Jul 25 23:45:09 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 8.98"
[Thu Jul 26 00:03:29 2012] fullrun_mos2_xmm0501210501_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jul 26 00:03:29 2012] fullrun_mos2_xmm0501210501_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jul 26 00:03:29 2012] Fit fullrun_mos2_xmm0501210501_pi300-10000_cl_pass1_src2 appears to have run properly
[Thu Jul 26 00:03:29 2012] fullrun_mos2_xmm0501210501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jul 26 00:03:29 2012] fullrun_mos2_xmm0501210501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jul 26 00:03:29 2012] Fit fullrun_mos2_xmm0501210501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Jul 26 00:03:37 2012] Spatial fit model total counts = 111.666000, observed total counts = 114.000000
[Thu Jul 26 00:03:37 2012] Offset between fit and detection position for source 1 = 0.087100 pixels
[Thu Jul 26 00:03:37 2012] 109.002900 total counts/ 51.360600 bgd. counts: snr = 8.043152
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.087100 pixels
  Position = (356.6, 259.1) = 8 22 40.88 -4 57 19.7
  Extent = 4.4 (3.5-5.6)", rotation angle = 0
  Source counts = 57.6 +/- 10.4
  Background counts = 51.4
  Rate = 0.005 +/- 0.0009
[Thu Jul 26 00:03:37 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 00:03:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 00:03:37 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 00:03:37 2012] Source does appear to be extended
[Thu Jul 26 00:03:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 00:31:34 2012] XMMSAS src. selection expression = ellipse(30974.668800, 22491.894800, 263.454699, 263.454699, 0.000000, X, Y)
[Thu Jul 26 00:31:34 2012] Writing source region out to fullrun_mos2_xmm0501210501_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul 26 00:31:34 2012] Extracting stamp from image fullrun_mos2_xmm0501210501_pi300-10000_cl_sm2.00.img.gz, (341, 244) - (372, 274)
[Thu Jul 26 00:31:34 2012] XMMSAS bgd. selection expression = annulus(30974.668800, 22491.894800, 439.091166, 878.182331, X, Y)
[Thu Jul 26 00:31:34 2012] Writing fullrun_mos2_xmm0501210501_pi300-10000_pass1_cl_src1.gif
[Thu Jul 26 00:31:44 2012] Mean detx,y = (5827.52, 2365.45) 
[Thu Jul 26 00:31:45 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 00:31:52 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 00:31:52 2012] Setting source spectrum file to fullrun_mos2_xmm0501210501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 26 00:31:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501210501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul 26 00:34:19 2012] Not generating rmf since there are only 57 counts
[Thu Jul 26 00:34:19 2012] rmf not generated due to insufficient counts
[Thu Jul 26 00:35:17 2012] Updating aperture counts using extracted products
[Thu Jul 26 00:35:17 2012] Error reading totcts from fullrun_mos2_xmm0501210501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 26 00:35:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 00:35:17 2012] Using photon index=1.80, rate=0.00496, arf fullrun_mos2_xmm0501210501_pi300-10000_pass1_cl_src1.arf
[Thu Jul 26 00:35:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 00:35:17 2012] Updating source flux to 9.3e-14
[Thu Jul 26 00:35:29 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jul 26 00:35:30 2012] xmm0501210501/analysis//spectral/fullrun_mos2_xmm0501210501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete