[Sat May 11 12:22:53 2013] Detection parameters:
  Position = (308.2, 284.6) = 3 50 8.76 -50 18 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1173.1 +/- 41.5
  Background counts = 60.6
  Rate = 0.1 +/- 0.004

[Sat May 11 12:22:54 2013] Off-axis axis estimate = 1.23'
[Sat May 11 12:24:53 2013] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Sat May 11 12:24:53 2013] Initial guess for spatial extent in simple fitting = 7.04"
[Sat May 11 12:24:53 2013] source mask rpix=1.6, npix_max = 17, mask sum = 14, frac = 0.780
[Sat May 11 12:24:53 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.04"
[Sat May 11 13:06:36 2013] fullrun_pn_xmm0501210401_pi300-10000_cl_pass0_src2.ximg exists
[Sat May 11 13:06:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210401_pi300-10000_cl_pass0_src2.csv
[Sat May 11 13:06:36 2013] fullrun_pn_xmm0501210401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat May 11 13:06:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210401_pi300-10000_cl_pass0_src2.csv
[Sat May 11 13:06:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 13:06:36 2013] fullrun_pn_xmm0501210401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat May 11 13:06:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat May 11 13:06:36 2013] fullrun_pn_xmm0501210401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat May 11 13:06:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat May 11 13:06:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 13:48:12 2013] Spatial fit model total counts = 1111.990000, observed total counts = 846.000000
[Sat May 11 13:48:12 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 13:48:12 2013] Vigneting correction estimate = 1.000000
[Sat May 11 13:48:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 13:48:12 2013] Assessing source extent using major
[Sat May 11 13:48:12 2013] Source does appear to be extended
[Sat May 11 13:48:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 13:48:23 2013] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Sat May 11 13:48:23 2013] Initial guess for spatial extent in simple fitting = 7.04"
[Sat May 11 13:48:23 2013] source mask rpix=1.6, npix_max = 17, mask sum = 14, frac = 0.780
[Sat May 11 13:48:23 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.04"
[Sat May 11 14:28:04 2013] fullrun_pn_xmm0501210401_pi300-10000_cl_pass1_src2.ximg exists
[Sat May 11 14:28:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210401_pi300-10000_cl_pass1_src2.csv
[Sat May 11 14:28:04 2013] fullrun_pn_xmm0501210401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat May 11 14:28:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210401_pi300-10000_cl_pass1_src2.csv
[Sat May 11 14:28:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 14:28:04 2013] fullrun_pn_xmm0501210401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat May 11 14:28:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat May 11 14:28:04 2013] fullrun_pn_xmm0501210401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat May 11 14:28:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat May 11 14:28:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 15:07:42 2013] Spatial fit model total counts = 1114.160000, observed total counts = 846.000000
[Sat May 11 15:07:42 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 15:07:42 2013] Vigneting correction estimate = 1.000000
[Sat May 11 15:07:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 15:07:42 2013] Assessing source extent using major
[Sat May 11 15:07:42 2013] Source does appear to be extended
[Sat May 11 15:07:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 15:07:52 2013] Counts = 1173.132690, rescaling region sizes by 2.000000
[Sat May 11 15:07:52 2013] XMMSAS src. selection expression = ellipse(26762.912445, 24711.217316, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat May 11 15:07:52 2013] Writing source region out to fullrun_pn_xmm0501210401_pi300-10000_pass1_cl_src2_src.reg
[Sat May 11 15:07:52 2013] Extracting stamp from image fullrun_pn_xmm0501210401_pi300-10000_cl_sm2.00.img.gz, (233, 210) - (383, 360)
[Sat May 11 15:07:52 2013] XMMSAS bgd. selection expression = annulus(26762.912445, 24711.217316, 4350.000000, 8700.000000, X, Y) && !ellipse(23920.934570, 24825.779175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24073.449600, 25344.264000, 382.754411, 382.754411, 0.000000, X, Y) && !ellipse(32019.055359, 32297.913086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28073.061800, 29942.466400, 460.140013, 460.140013, 0.000000, X, Y) && !ellipse(26722.966600, 29211.402000, 487.445614, 487.445614, 0.000000, X, Y) && !ellipse(29556.173187, 27185.433807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23574.326400, 27165.364400, 389.412811, 275.852808, 115.806280, X, Y) && !ellipse(20677.478300, 20620.145400, 412.515212, 412.515212, 0.000000, X, Y)
[Sat May 11 15:07:52 2013] Writing fullrun_pn_xmm0501210401_pi300-10000_pass1_cl_src2.gif
[Sat May 11 15:10:43 2013] Mean detx,y = (-2477.01, 1089.98) 
[Sat May 11 15:10:46 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 11 15:13:24 2013] Binned source spectrum to 10 counts/bin
[Sat May 11 15:13:24 2013] Setting source spectrum file to fullrun_pn_xmm0501210401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat May 11 15:13:24 2013] Setting bgd. spectrum file to fullrun_pn_xmm0501210401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat May 11 15:22:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 11 15:22:12 2013] rmf not generated due to insufficient counts
[Sat May 11 16:05:02 2013] Updating aperture counts using extracted products
[Sat May 11 16:05:02 2013] Total counts from fullrun_pn_xmm0501210401_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 1243.00
[Sat May 11 16:05:02 2013] Total counts from fullrun_pn_xmm0501210401_pi300-10000_pass1_cl_src2_bgd.pi.gz = 16789.00
[Sat May 11 16:05:02 2013] Got source and background scale factors 4568532.000000, 155102722.000000
[Sat May 11 16:05:02 2013] User source parameters:
  Position = (308.2, 284.6) = 3 50 8.76 -50 18 37.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 748.5 +/- 36.3
  Background aperture counts = 494.5
  Rate = 0.07 +/- 0.004

[Sat May 11 16:05:02 2013] Updating counts from extracted products
[Sat May 11 16:05:02 2013] Set source signif. to 748.48/22.24 = 33.66
[Sat May 11 16:05:06 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 16:05:06 2013] Using photon index=1.80, rate=0.0742, arf fullrun_pn_xmm0501210401_pi300-10000_pass1_cl_src2.arf
[Sat May 11 16:05:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 16:05:06 2013] Updating source flux to 2.9e-13
[Sat May 11 16:05:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 16:05:17 2013] xmm0501210401/analysis//spectral/fullrun_pn_xmm0501210401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete