[Sat May 11 12:23:31 2013] Detection parameters:
  Position = (275.5, 284.8) = 3 50 23.58 -50 18 35.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 251.8 +/- 22.3
  Background counts = 17.2
  Rate = 0.02 +/- 0.001

[Sat May 11 12:23:32 2013] Off-axis axis estimate = 1.93'
[Sat May 11 13:26:55 2013] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Sat May 11 13:26:55 2013] Initial guess for spatial extent in simple fitting = 7.39"
[Sat May 11 13:26:55 2013] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.723
[Sat May 11 13:26:55 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.39"
[Sat May 11 13:48:08 2013] fullrun_mos2_xmm0501210401_pi300-10000_cl_pass0_src4.ximg exists
[Sat May 11 13:48:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210401_pi300-10000_cl_pass0_src4.csv
[Sat May 11 13:48:08 2013] fullrun_mos2_xmm0501210401_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat May 11 13:48:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210401_pi300-10000_cl_pass0_src4.csv
[Sat May 11 13:48:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 13:48:08 2013] fullrun_mos2_xmm0501210401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat May 11 13:48:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat May 11 13:48:08 2013] fullrun_mos2_xmm0501210401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat May 11 13:48:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat May 11 13:48:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210401_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 13:48:16 2013] Warning, spatial fit 4 centroid is now closest to src. 6
[Sat May 11 13:48:16 2013] Vigneting correction estimate = 1.000000
[Sat May 11 13:48:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 13:48:16 2013] Assessing source extent using major
[Sat May 11 13:48:16 2013] Source does appear to be extended
[Sat May 11 13:48:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 13:48:16 2013] Source is confused with source 6
[Sat May 11 14:48:39 2013] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Sat May 11 14:48:39 2013] Initial guess for spatial extent in simple fitting = 7.39"
[Sat May 11 14:48:39 2013] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.723
[Sat May 11 14:48:39 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.39"
[Sat May 11 15:07:38 2013] fullrun_mos2_xmm0501210401_pi300-10000_cl_pass1_src4.ximg exists
[Sat May 11 15:07:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210401_pi300-10000_cl_pass1_src4.csv
[Sat May 11 15:07:38 2013] fullrun_mos2_xmm0501210401_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat May 11 15:07:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210401_pi300-10000_cl_pass1_src4.csv
[Sat May 11 15:07:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 15:07:38 2013] fullrun_mos2_xmm0501210401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat May 11 15:07:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat May 11 15:07:38 2013] fullrun_mos2_xmm0501210401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat May 11 15:07:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat May 11 15:07:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210401_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 15:07:46 2013] Source 3 is offset by -1.539965 and -6.994565 pixels which is larger than
2 X fitted extent = 1.586874 x 1.586874, not incorporating fit results
[Sat May 11 15:07:46 2013] Vigneting correction estimate = 1.000000
[Sat May 11 15:07:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 15:07:46 2013] Assessing source extent using major
[Sat May 11 15:07:46 2013] Source does appear to be extended
[Sat May 11 15:07:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 15:49:51 2013] XMMSAS src. selection expression = ellipse(23922.339081, 24729.568878, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 15:49:51 2013] Writing source region out to fullrun_mos2_xmm0501210401_pi300-10000_pass1_cl_src3_src.reg
[Sat May 11 15:49:51 2013] Extracting stamp from image fullrun_mos2_xmm0501210401_pi300-10000_cl_sm2.00.img.gz, (238, 247) - (313, 322)
[Sat May 11 15:49:51 2013] XMMSAS bgd. selection expression = annulus(23922.339081, 24729.568878, 1087.500000, 2175.000000, X, Y) && !ellipse(24054.320880, 25352.140600, 353.350410, 353.350410, 0.000000, X, Y)
[Sat May 11 15:49:51 2013] Writing fullrun_mos2_xmm0501210401_pi300-10000_pass1_cl_src3.gif
[Sat May 11 15:51:04 2013] Mean detx,y = (312.29, 346.36) 
[Sat May 11 15:51:05 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 11 15:51:13 2013] Binned source spectrum to 10 counts/bin
[Sat May 11 15:51:14 2013] Setting source spectrum file to fullrun_mos2_xmm0501210401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May 11 15:51:14 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0501210401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat May 11 16:03:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 11 16:03:58 2013] rmf not generated due to insufficient counts
[Sat May 11 16:05:08 2013] Updating aperture counts using extracted products
[Sat May 11 16:05:08 2013] Total counts from fullrun_mos2_xmm0501210401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 432.00
[Sat May 11 16:05:08 2013] Total counts from fullrun_mos2_xmm0501210401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 801.00
[Sat May 11 16:05:08 2013] Got source and background scale factors 1255616.000000, 10399636.000000
[Sat May 11 16:05:08 2013] User source parameters:
  Position = (275.5, 284.8) = 3 50 23.58 -50 18 35.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 335.3 +/- 21.8
  Background aperture counts = 96.7
  Rate = 0.02 +/- 0.001

[Sat May 11 16:05:08 2013] Updating counts from extracted products
[Sat May 11 16:05:08 2013] Set source signif. to 335.29/9.83 = 34.09
[Sat May 11 16:05:09 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 16:05:09 2013] Using photon index=1.80, rate=0.0191, arf fullrun_mos2_xmm0501210401_pi300-10000_pass1_cl_src3.arf
[Sat May 11 16:05:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 16:05:09 2013] Updating source flux to 2.2e-13
[Sat May 11 16:05:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 16:05:15 2013] xmm0501210401/analysis//spectral/fullrun_mos2_xmm0501210401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete