[Tue Dec 27 14:47:30 2011] Detection parameters:
  Position = (296.4, 322.2) = 7 39 44.65 -31 43 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 993.4 +/- 37.7
  Background counts = 19.6
  Rate = 0.03 +/- 0.001

[Tue Dec 27 14:47:32 2011] Off-axis axis estimate = 1.73'
[Tue Dec 27 17:33:24 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 17:33:24 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Dec 27 17:33:24 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Tue Dec 27 17:33:24 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue Dec 27 18:52:10 2011] fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Dec 27 18:52:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_src1.csv
[Tue Dec 27 18:52:10 2011] fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Dec 27 18:52:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_src1.csv
[Tue Dec 27 18:52:10 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 18:52:11 2011] fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Dec 27 18:52:11 2011] fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Dec 27 18:52:11 2011] Fit fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Dec 27 18:52:40 2011] Spatial fit model total counts = 1041.000000, observed total counts = 1041.000000
[Tue Dec 27 18:52:40 2011] Offset between fit and detection position for source 2 = 0.172500 pixels
[Tue Dec 27 18:52:40 2011] 1040.674000 total counts/ 366.349000 bgd. counts: snr = 35.230739
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.172500 pixels
  Position = (296.2, 322.2) = 7 39 44.70 -31 43 3.7
  Extent = 5.1 (4.8-5.4)", rotation angle = 0
  Source counts = 674.3 +/- 32.3
  Background counts = 366.3
  Rate = 0.02 +/- 0.0009
[Tue Dec 27 18:52:40 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 18:52:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 18:52:40 2011] Assessing source extent using major axis lower bound
[Tue Dec 27 18:52:40 2011] Source does appear to be extended
[Tue Dec 27 18:52:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 21:25:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 27 21:25:18 2011] Initial guess for spatial extent in simple fitting = 5.11"
[Tue Dec 27 21:25:18 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.803
[Tue Dec 27 21:25:18 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.11"
[Tue Dec 27 22:41:56 2011] fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Dec 27 22:41:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_src1.csv
[Tue Dec 27 22:41:56 2011] fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Dec 27 22:41:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_src1.csv
[Tue Dec 27 22:41:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 22:41:57 2011] fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Dec 27 22:41:57 2011] fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Dec 27 22:41:57 2011] Fit fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Dec 27 22:42:25 2011] Spatial fit model total counts = 1041.100000, observed total counts = 1041.000000
[Tue Dec 27 22:42:25 2011] Offset between fit and detection position for source 2 = 0.006686 pixels
[Tue Dec 27 22:42:25 2011] 1040.789000 total counts/ 365.852000 bgd. counts: snr = 35.286657
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.006686 pixels
  Position = (296.2, 322.2) = 7 39 44.71 -31 43 3.7
  Extent = 5.1 (4.8-5.5)", rotation angle = 0
  Source counts = 674.9 +/- 32.3
  Background counts = 365.9
  Rate = 0.02 +/- 0.0009
[Tue Dec 27 22:42:25 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 22:42:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 22:42:25 2011] Assessing source extent using major axis lower bound
[Tue Dec 27 22:42:25 2011] Source does appear to be extended
[Tue Dec 27 22:42:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 01:56:25 2011] XMMSAS src. selection expression = ellipse(25722.629340, 27984.997800, 306.996609, 306.996609, 0.000000, X, Y)
[Wed Dec 28 01:56:25 2011] Writing source region out to fullrun_mos2_xmm0501210201_pi300-10000_pass1_cl_src2_src.reg
[Wed Dec 28 01:56:25 2011] Extracting stamp from image fullrun_mos2_xmm0501210201_pi300-10000_cl_sm2.00.img.gz, (279, 305) - (314, 340)
[Wed Dec 28 01:56:25 2011] XMMSAS bgd. selection expression = annulus(25722.629340, 27984.997800, 511.661015, 1023.322029, X, Y)
[Wed Dec 28 01:56:25 2011] Writing fullrun_mos2_xmm0501210201_pi300-10000_pass1_cl_src2.gif
[Wed Dec 28 01:56:32 2011] Mean detx,y = (39.24, 102.00) 
[Wed Dec 28 01:56:35 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 01:57:00 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 01:57:00 2011] Setting source spectrum file to fullrun_mos2_xmm0501210201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Dec 28 01:57:00 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0501210201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Dec 28 03:13:12 2011] Updating aperture counts using extracted products
[Wed Dec 28 03:13:12 2011] Error reading totcts from fullrun_mos2_xmm0501210201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Dec 28 03:13:15 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 03:13:15 2011] Using photon index=1.80, rate=0.0193, arf fullrun_mos2_xmm0501210201_pi300-10000_pass1_cl_src2.arf
[Wed Dec 28 03:13:15 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 03:13:15 2011] Updating source flux to 3.1e-13
[Wed Dec 28 03:17:33 2011] Reading fit data from xmm0501210201/analysis//spectral/fullrun_mos2_xmm0501210201_pi300-10000_pass1_cl_src2_pl.csv
[Wed Dec 28 03:17:33 2011] Spectral fit parameter nH value = 9.52196e+13
[Wed Dec 28 03:17:33 2011] Spectral fit parameter PhoIndex value = -0.551552
[Wed Dec 28 03:17:33 2011] Failed to get F(0.3-8.0) from xmm0501210201/analysis//spectral/fullrun_mos2_xmm0501210201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Dec 28 03:17:33 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 03:17:33 2011] Using Nh = 9.5e+13, photon index=-0.55, rate=0.0193, arf fullrun_mos2_xmm0501210201_pi300-10000_pass1_cl_src2.arf
[Wed Dec 28 03:17:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 03:17:33 2011] Updating source flux to 8.3e-13