[Tue Dec 27 14:47:31 2011] Detection parameters:
  Position = (313.3, 274.3) = 7 39 38.86 -31 46 31.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.4 +/- 17.0
  Background counts = 17.6
  Rate = 0.005 +/- 0.0005

[Tue Dec 27 14:47:32 2011] Off-axis axis estimate = 2.06'
[Tue Dec 27 17:33:24 2011] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 17:33:24 2011] Initial guess for spatial extent in simple fitting = 7.46"
[Tue Dec 27 17:33:24 2011] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.275
[Tue Dec 27 17:33:24 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 7.46"
[Tue Dec 27 18:52:10 2011] fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_src7.ximg exists
[Tue Dec 27 18:52:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_src7.csv
[Tue Dec 27 18:52:10 2011] fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Dec 27 18:52:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_src7.csv
[Tue Dec 27 18:52:10 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 18:52:11 2011] fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Dec 27 18:52:11 2011] fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Dec 27 18:52:11 2011] Fit fullrun_mos2_xmm0501210201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Dec 27 18:52:40 2011] Source 19 is offset by 7.205865 and 6.159051 pixels which is larger than
2 X fitted extent = 0.857126 x 0.857126, not incorporating fit results
[Tue Dec 27 18:52:40 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 18:52:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 18:52:40 2011] Assessing source extent using major
[Tue Dec 27 18:52:40 2011] Source does appear to be extended
[Tue Dec 27 18:52:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 21:25:18 2011] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 21:25:18 2011] Initial guess for spatial extent in simple fitting = 7.46"
[Tue Dec 27 21:25:18 2011] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.275
[Tue Dec 27 21:25:18 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 7.46"
[Tue Dec 27 22:41:56 2011] fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_src7.ximg exists
[Tue Dec 27 22:41:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_src7.csv
[Tue Dec 27 22:41:56 2011] fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Dec 27 22:41:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_src7.csv
[Tue Dec 27 22:41:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 22:41:57 2011] fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Dec 27 22:41:57 2011] fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Dec 27 22:41:57 2011] Fit fullrun_mos2_xmm0501210201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Dec 27 22:42:25 2011] Spatial fit model total counts = 298.000000, observed total counts = 298.000000
[Tue Dec 27 22:42:25 2011] Offset between fit and detection position for source 19 = 0.174051 pixels
[Tue Dec 27 22:42:25 2011] 293.275000 total counts/ 188.695000 bgd. counts: snr = 7.613221
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.174051 pixels
  Position = (313.4, 274.5) = 7 39 38.84 -31 46 31.5
  Extent = 4.2 (3.5-5.0)", rotation angle = 0
  Source counts = 104.6 +/- 17.1
  Background counts = 188.7
  Rate = 0.003 +/- 0.0005
[Tue Dec 27 22:42:25 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 22:42:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 22:42:25 2011] Assessing source extent using major axis lower bound
[Tue Dec 27 22:42:25 2011] Source does appear to be extended
[Tue Dec 27 22:42:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 01:56:25 2011] XMMSAS src. selection expression = ellipse(27217.880800, 23830.062600, 251.404207, 251.404207, 0.000000, X, Y)
[Wed Dec 28 01:56:25 2011] Writing source region out to fullrun_mos2_xmm0501210201_pi300-10000_pass1_cl_src19_src.reg
[Wed Dec 28 01:56:25 2011] Extracting stamp from image fullrun_mos2_xmm0501210201_pi300-10000_cl_sm2.00.img.gz, (299, 260) - (328, 289)
[Wed Dec 28 01:56:25 2011] XMMSAS bgd. selection expression = annulus(27217.880800, 23830.062600, 419.007012, 838.014024, X, Y)
[Wed Dec 28 01:56:25 2011] Writing fullrun_mos2_xmm0501210201_pi300-10000_pass1_cl_src19.gif
[Wed Dec 28 02:02:06 2011] Mean detx,y = (1490.98, -4070.94) 
[Wed Dec 28 02:02:10 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 02:02:32 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 02:02:32 2011] Setting source spectrum file to fullrun_mos2_xmm0501210201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Dec 28 02:02:32 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0501210201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed Dec 28 03:13:13 2011] Updating aperture counts using extracted products
[Wed Dec 28 03:13:13 2011] Error reading totcts from fullrun_mos2_xmm0501210201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Dec 28 03:13:16 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 03:13:16 2011] Using photon index=1.80, rate=0.00299, arf fullrun_mos2_xmm0501210201_pi300-10000_pass1_cl_src19.arf
[Wed Dec 28 03:13:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 03:13:16 2011] Updating source flux to 4.7e-14
[Wed Dec 28 03:16:01 2011] Flag b found in src. 19 procflags, skipping spectral fitting