[Tue Dec 27 14:46:24 2011] Detection parameters:
  Position = (354.7, 494.1) = 7 39 24.80 -31 30 35.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.2 +/- 12.5
  Background counts = 15.4
  Rate = 0.002 +/- 0.0004

[Tue Dec 27 14:46:24 2011] Off-axis axis estimate = 14.76'
[Tue Dec 27 16:39:03 2011] Using EEF radius (= 13.81 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 16:39:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 27 16:39:03 2011] Initial guess for spatial extent in simple fitting = 13.81"
[Tue Dec 27 16:39:03 2011] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.037
[Tue Dec 27 16:39:03 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 13.81"
[Tue Dec 27 17:33:24 2011] fullrun_mos1_xmm0501210201_pi300-10000_cl_pass0_src15.ximg exists
[Tue Dec 27 17:33:24 2011] fullrun_mos1_xmm0501210201_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Dec 27 17:33:24 2011] Fit fullrun_mos1_xmm0501210201_pi300-10000_cl_pass0_src15 appears to have run properly
[Tue Dec 27 17:33:24 2011] fullrun_mos1_xmm0501210201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Dec 27 17:33:24 2011] fullrun_mos1_xmm0501210201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Dec 27 17:33:24 2011] Fit fullrun_mos1_xmm0501210201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Dec 27 18:52:31 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 18.096953 pixels away
[Tue Dec 27 18:52:31 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 18:52:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 18:52:31 2011] Assessing source extent using major
[Tue Dec 27 18:52:31 2011] Source does appear to be extended
[Tue Dec 27 18:52:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 20:28:05 2011] Using EEF radius (= 13.81 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 20:28:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 27 20:28:05 2011] Initial guess for spatial extent in simple fitting = 13.81"
[Tue Dec 27 20:28:05 2011] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.037
[Tue Dec 27 20:28:05 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 13.81"
[Tue Dec 27 21:25:18 2011] fullrun_mos1_xmm0501210201_pi300-10000_cl_pass1_src15.ximg exists
[Tue Dec 27 21:25:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210201_pi300-10000_cl_pass1_src15.csv
[Tue Dec 27 21:25:18 2011] fullrun_mos1_xmm0501210201_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Dec 27 21:25:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210201_pi300-10000_cl_pass1_src15.csv
[Tue Dec 27 21:25:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501210201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501210201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 21:25:18 2011] fullrun_mos1_xmm0501210201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Dec 27 21:25:18 2011] fullrun_mos1_xmm0501210201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Dec 27 21:25:18 2011] Fit fullrun_mos1_xmm0501210201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Dec 27 22:42:17 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 18.096953 pixels away
[Tue Dec 27 22:42:17 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 22:42:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 22:42:17 2011] Assessing source extent using major
[Tue Dec 27 22:42:17 2011] Source does appear to be extended
[Tue Dec 27 22:42:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 00:59:58 2011] XMMSAS src. selection expression = ellipse(30814.349091, 42935.131317, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Dec 28 00:59:58 2011] Writing source region out to fullrun_mos1_xmm0501210201_pi300-10000_pass1_cl_src17_src.reg
[Wed Dec 28 00:59:58 2011] Extracting stamp from image fullrun_mos1_xmm0501210201_pi300-10000_cl_sm2.00.img.gz, (317, 457) - (392, 532)
[Wed Dec 28 00:59:58 2011] XMMSAS bgd. selection expression = annulus(30814.349091, 42935.131317, 1087.500000, 2175.000000, X, Y)
[Wed Dec 28 00:59:58 2011] Writing fullrun_mos1_xmm0501210201_pi300-10000_pass1_cl_src17.gif
[Wed Dec 28 01:10:51 2011] Mean detx,y = (8697.65, 13189.44) 
[Wed Dec 28 01:10:54 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 01:11:52 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 01:11:53 2011] Setting source spectrum file to fullrun_mos1_xmm0501210201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Dec 28 01:11:53 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0501210201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Dec 28 01:55:37 2011] Not generating rmf since there are only 81 counts
[Wed Dec 28 01:55:37 2011] rmf not generated due to insufficient counts
[Wed Dec 28 03:13:09 2011] Updating aperture counts using extracted products
[Wed Dec 28 03:13:09 2011] Error reading totcts from fullrun_mos1_xmm0501210201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Dec 28 03:13:11 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 03:13:11 2011] Using photon index=1.80, rate=0.0023, arf fullrun_mos1_xmm0501210201_pi300-10000_pass1_cl_src17.arf
[Wed Dec 28 03:13:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 03:13:12 2011] Updating source flux to 6.3e-14
[Wed Dec 28 03:13:20 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting