[Mon Jun 10 18:15:55 2013] Detection parameters:
  Position = (416.7, 282.7) = 10 9 1.94 -42 51 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.8 +/- 14.1
  Background counts = 51.1
  Rate = 0.006 +/- 0.001

[Mon Jun 10 18:15:55 2013] Off-axis axis estimate = 8.65'
[Mon Jun 10 18:16:13 2013] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:13 2013] Initial guess for spatial extent in simple fitting = 10.76"
[Mon Jun 10 18:16:13 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.019
[Mon Jun 10 18:16:13 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 10.76"
[Mon Jun 10 18:16:13 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src25.ximg exists
[Mon Jun 10 18:16:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src25.csv
[Mon Jun 10 18:16:13 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon Jun 10 18:16:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src25.csv
[Mon Jun 10 18:16:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:14 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon Jun 10 18:16:14 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon Jun 10 18:16:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:22 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 13.141023 pixels away
[Mon Jun 10 18:16:22 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:22 2013] Assessing source extent using major
[Mon Jun 10 18:16:22 2013] Source does appear to be extended
[Mon Jun 10 18:16:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:16:38 2013] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:38 2013] Initial guess for spatial extent in simple fitting = 10.76"
[Mon Jun 10 18:16:38 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.019
[Mon Jun 10 18:16:38 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 10.76"
[Mon Jun 10 18:16:39 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src25.ximg exists
[Mon Jun 10 18:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src25.csv
[Mon Jun 10 18:16:39 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src25_1.ximg exists
[Mon Jun 10 18:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src25.csv
[Mon Jun 10 18:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:39 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Mon Jun 10 18:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Mon Jun 10 18:16:39 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Mon Jun 10 18:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Mon Jun 10 18:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:48 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 12.856537 pixels away
[Mon Jun 10 18:16:48 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:48 2013] Assessing source extent using major
[Mon Jun 10 18:16:48 2013] Source does appear to be extended
[Mon Jun 10 18:16:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:17:03 2013] XMMSAS src. selection expression = ellipse(36208.519012, 24543.576111, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 18:17:03 2013] Not overwriting source region fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src25_src.reg
[Mon Jun 10 18:17:03 2013] Extracting stamp from image fullrun_pn_xmm0501210101_pi300-10000_cl_sm2.00.img.gz, (379, 245) - (454, 320)
[Mon Jun 10 18:17:03 2013] XMMSAS bgd. selection expression = annulus(36208.519012, 24543.576111, 1087.500000, 2175.000000, X, Y) && !ellipse(33555.252655, 23467.065277, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 18:17:03 2013] Writing fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src25.gif
[Mon Jun 10 18:17:06 2013] ../../xmm0501210101/products/events/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src25_src.evt and ../../xmm0501210101/products/events/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src25_bgd.evt exist, delete to re-create
[Mon Jun 10 18:17:06 2013] Mean detx,y = (7052.16, 7908.11) 
[Mon Jun 10 18:17:06 2013] ../../xmm0501210101/products/images/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src25_src.img and ../../xmm0501210101/products/images/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src25_bgd.img exist, delete to re-create
[Mon Jun 10 18:17:06 2013] ../../xmm0501210101/products/spectra/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src25_src_b10.pi.gz and ../../xmm0501210101/products/spectra/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src25_bgd.pi exist, delete to re-create
[Mon Jun 10 18:17:06 2013] Setting source spectrum file to fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon Jun 10 18:17:06 2013] Setting bgd. spectrum file to fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Mon Jun 10 18:17:06 2013] ../../xmm0501210101/products/lightcurves/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src25_src.lc and ../../xmm0501210101/products/lightcurves/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src25_bgd.lc exist, delete to re-create
[Mon Jun 10 18:17:11 2013] Not generating rmf since there are only 75 counts
[Mon Jun 10 18:17:11 2013] rmf not generated due to insufficient counts
[Mon Jun 10 18:17:11 2013] fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src25.arf exists, delete to re-create
[Mon Jun 10 18:28:25 2013] Updating aperture counts using extracted products
[Mon Jun 10 18:28:25 2013] Total counts from fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 223.00
[Mon Jun 10 18:28:25 2013] Total counts from fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src25_bgd.pi.gz = 1489.00
[Mon Jun 10 18:28:25 2013] Got source and background scale factors 1233328.000000, 9744092.000000
[Mon Jun 10 18:28:25 2013] User source parameters:
  Position = (416.7, 282.7) = 10 9 1.94 -42 51 32.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 34.5 +/- 16.0
  Background aperture counts = 188.5
  Rate = 0.002 +/- 0.0008

[Mon Jun 10 18:28:25 2013] Updating counts from extracted products
[Mon Jun 10 18:28:25 2013] Set source signif. to 34.53/13.73 = 2.52
[Mon Jun 10 18:28:27 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 18:28:27 2013] Using photon index=1.80, rate=0.00163, arf fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src25.arf
[Mon Jun 10 18:28:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 18:28:27 2013] Updating source flux to 9.1e-15
[Mon Jun 10 18:28:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 18:28:42 2013] xmm0501210101/analysis//spectral/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete