[Mon Jun 10 18:15:55 2013] Detection parameters:
  Position = (269.0, 311.3) = 10 10 0.40 -42 49 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.3 +/- 15.4
  Background counts = 58.1
  Rate = 0.006 +/- 0.0006

[Mon Jun 10 18:15:55 2013] Off-axis axis estimate = 2.33'
[Mon Jun 10 18:16:13 2013] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:13 2013] Initial guess for spatial extent in simple fitting = 7.59"
[Mon Jun 10 18:16:13 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.793
[Mon Jun 10 18:16:13 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 7.59"
[Mon Jun 10 18:16:13 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src22.ximg exists
[Mon Jun 10 18:16:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src22.csv
[Mon Jun 10 18:16:13 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src22_1.ximg exists
[Mon Jun 10 18:16:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src22.csv
[Mon Jun 10 18:16:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:14 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Mon Jun 10 18:16:14 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Mon Jun 10 18:16:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:22 2013] Source 22 is offset by 0.369267 and -1.699095 pixels which is larger than
2 X fitted extent = 1.286290 x 1.286290, not incorporating fit results
[Mon Jun 10 18:16:22 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:22 2013] Assessing source extent using major
[Mon Jun 10 18:16:22 2013] Source does appear to be extended
[Mon Jun 10 18:16:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:16:38 2013] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:38 2013] Initial guess for spatial extent in simple fitting = 7.59"
[Mon Jun 10 18:16:38 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.793
[Mon Jun 10 18:16:38 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 7.59"
[Mon Jun 10 18:16:39 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src22.ximg exists
[Mon Jun 10 18:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src22.csv
[Mon Jun 10 18:16:39 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon Jun 10 18:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src22.csv
[Mon Jun 10 18:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:39 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon Jun 10 18:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon Jun 10 18:16:39 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon Jun 10 18:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon Jun 10 18:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:48 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 10.358432 pixels away
[Mon Jun 10 18:16:48 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:48 2013] Assessing source extent using major
[Mon Jun 10 18:16:48 2013] Source does appear to be extended
[Mon Jun 10 18:16:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:17:03 2013] XMMSAS src. selection expression = ellipse(23351.452026, 27034.667969, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 18:17:03 2013] Not overwriting source region fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src22_src.reg
[Mon Jun 10 18:17:03 2013] Extracting stamp from image fullrun_pn_xmm0501210101_pi300-10000_cl_sm2.00.img.gz, (231, 274) - (306, 349)
[Mon Jun 10 18:17:03 2013] XMMSAS bgd. selection expression = annulus(23351.452026, 27034.667969, 1087.500000, 2175.000000, X, Y)
[Mon Jun 10 18:17:03 2013] Writing fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src22.gif
[Mon Jun 10 18:17:06 2013] ../../xmm0501210101/products/events/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0501210101/products/events/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create
[Mon Jun 10 18:17:06 2013] Mean detx,y = (-2721.56, -725.75) 
[Mon Jun 10 18:17:06 2013] ../../xmm0501210101/products/images/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src22_src.img and ../../xmm0501210101/products/images/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create
[Mon Jun 10 18:17:06 2013] ../../xmm0501210101/products/spectra/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src22_src_b10.pi.gz and ../../xmm0501210101/products/spectra/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create
[Mon Jun 10 18:17:06 2013] Setting source spectrum file to fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Jun 10 18:17:06 2013] Setting bgd. spectrum file to fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Mon Jun 10 18:17:06 2013] ../../xmm0501210101/products/lightcurves/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0501210101/products/lightcurves/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create
[Mon Jun 10 18:17:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 18:17:11 2013] rmf not generated due to insufficient counts
[Mon Jun 10 18:17:11 2013] fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src22.arf exists, delete to re-create
[Mon Jun 10 18:28:24 2013] Updating aperture counts using extracted products
[Mon Jun 10 18:28:24 2013] Total counts from fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 241.00
[Mon Jun 10 18:28:24 2013] Total counts from fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src22_bgd.pi.gz = 1559.00
[Mon Jun 10 18:28:24 2013] Got source and background scale factors 782136.000000, 8968416.000000
[Mon Jun 10 18:28:24 2013] User source parameters:
  Position = (269.0, 311.3) = 10 10 0.40 -42 49 17.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 105.0 +/- 16.5
  Background aperture counts = 136.0
  Rate = 0.005 +/- 0.0008

[Mon Jun 10 18:28:24 2013] Updating counts from extracted products
[Mon Jun 10 18:28:24 2013] Set source signif. to 105.04/11.66 = 9.01
[Mon Jun 10 18:28:26 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 18:28:26 2013] Using photon index=1.80, rate=0.00496, arf fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src22.arf
[Mon Jun 10 18:28:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 18:28:26 2013] Updating source flux to 2.5e-14
[Mon Jun 10 18:28:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 18:28:42 2013] xmm0501210101/analysis//spectral/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete