[Mon Jun 10 18:15:54 2013] Detection parameters:
  Position = (240.3, 347.7) = 10 10 11.71 -42 46 45.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.4 +/- 17.7
  Background counts = 52.8
  Rate = 0.008 +/- 0.0007

[Mon Jun 10 18:15:55 2013] Off-axis axis estimate = 5.53'
[Mon Jun 10 18:16:13 2013] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:13 2013] Initial guess for spatial extent in simple fitting = 9.19"
[Mon Jun 10 18:16:13 2013] source mask rpix=2.1, npix_max = 27, mask sum = 20, frac = 0.732
[Mon Jun 10 18:16:13 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 9.19"
[Mon Jun 10 18:16:13 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src21.ximg exists
[Mon Jun 10 18:16:13 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src21.csv
[Mon Jun 10 18:16:13 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Jun 10 18:16:13 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src21.csv
[Mon Jun 10 18:16:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:14 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon Jun 10 18:16:14 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon Jun 10 18:16:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:22 2013] Source 21 is offset by -6.653308 and 5.627654 pixels which is larger than
2 X fitted extent = 6.881885 x 4.691908, not incorporating fit results
[Mon Jun 10 18:16:22 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:22 2013] Assessing source extent using major
[Mon Jun 10 18:16:22 2013] Source does appear to be extended
[Mon Jun 10 18:16:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:16:38 2013] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:38 2013] Initial guess for spatial extent in simple fitting = 9.19"
[Mon Jun 10 18:16:38 2013] source mask rpix=2.1, npix_max = 27, mask sum = 20, frac = 0.732
[Mon Jun 10 18:16:38 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 9.19"
[Mon Jun 10 18:16:39 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src21.ximg exists
[Mon Jun 10 18:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src21.csv
[Mon Jun 10 18:16:39 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Jun 10 18:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src21.csv
[Mon Jun 10 18:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:39 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Jun 10 18:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Jun 10 18:16:39 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Jun 10 18:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Jun 10 18:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:48 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 10.717983 pixels away
[Mon Jun 10 18:16:48 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:48 2013] Assessing source extent using major
[Mon Jun 10 18:16:48 2013] Source does appear to be extended
[Mon Jun 10 18:16:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:17:03 2013] XMMSAS src. selection expression = ellipse(20860.202194, 30205.165894, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 18:17:03 2013] Not overwriting source region fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src21_src.reg
[Mon Jun 10 18:17:03 2013] Extracting stamp from image fullrun_pn_xmm0501210101_pi300-10000_cl_sm2.00.img.gz, (203, 310) - (278, 385)
[Mon Jun 10 18:17:03 2013] XMMSAS bgd. selection expression = annulus(20860.202194, 30205.165894, 1087.500000, 2175.000000, X, Y) && !ellipse(21714.999496, 31447.998383, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 18:17:03 2013] Writing fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src21.gif
[Mon Jun 10 18:17:06 2013] ../../xmm0501210101/products/events/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0501210101/products/events/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Mon Jun 10 18:17:06 2013] Mean detx,y = (-3274.58, -4861.89) 
[Mon Jun 10 18:17:06 2013] ../../xmm0501210101/products/images/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src21_src.img and ../../xmm0501210101/products/images/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Mon Jun 10 18:17:06 2013] ../../xmm0501210101/products/spectra/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src21_src_b10.pi.gz and ../../xmm0501210101/products/spectra/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Mon Jun 10 18:17:06 2013] Setting source spectrum file to fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Jun 10 18:17:06 2013] Setting bgd. spectrum file to fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon Jun 10 18:17:06 2013] ../../xmm0501210101/products/lightcurves/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0501210101/products/lightcurves/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Mon Jun 10 18:17:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 18:17:11 2013] rmf not generated due to insufficient counts
[Mon Jun 10 18:17:11 2013] fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src21.arf exists, delete to re-create
[Mon Jun 10 18:28:24 2013] Updating aperture counts using extracted products
[Mon Jun 10 18:28:24 2013] Total counts from fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 295.00
[Mon Jun 10 18:28:24 2013] Total counts from fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 1240.00
[Mon Jun 10 18:28:24 2013] Got source and background scale factors 993550.000000, 7639482.000000
[Mon Jun 10 18:28:24 2013] User source parameters:
  Position = (240.3, 347.7) = 10 10 11.71 -42 46 45.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 133.7 +/- 18.2
  Background aperture counts = 161.3
  Rate = 0.006 +/- 0.0009

[Mon Jun 10 18:28:24 2013] Updating counts from extracted products
[Mon Jun 10 18:28:24 2013] Set source signif. to 133.73/12.70 = 10.53
[Mon Jun 10 18:28:26 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 18:28:26 2013] Using photon index=1.80, rate=0.00632, arf fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src21.arf
[Mon Jun 10 18:28:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 18:28:26 2013] Updating source flux to 3.2e-14
[Mon Jun 10 18:28:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 18:28:42 2013] xmm0501210101/analysis//spectral/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete