[Mon Jun 10 18:15:54 2013] Detection parameters:
  Position = (417.9, 366.3) = 10 9 1.54 -42 45 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 221.8 +/- 20.3
  Background counts = 52.8
  Rate = 0.02 +/- 0.002

[Mon Jun 10 18:15:55 2013] Off-axis axis estimate = 9.96'
[Mon Jun 10 18:16:13 2013] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:13 2013] Initial guess for spatial extent in simple fitting = 11.41"
[Mon Jun 10 18:16:13 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.923
[Mon Jun 10 18:16:13 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 11.41"
[Mon Jun 10 18:16:13 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src17.ximg exists
[Mon Jun 10 18:16:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src17.csv
[Mon Jun 10 18:16:13 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Jun 10 18:16:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src17.csv
[Mon Jun 10 18:16:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:14 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Jun 10 18:16:14 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Jun 10 18:16:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:22 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.971540 pixels away
[Mon Jun 10 18:16:22 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:22 2013] Assessing source extent using major
[Mon Jun 10 18:16:22 2013] Source does appear to be extended
[Mon Jun 10 18:16:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:16:38 2013] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:38 2013] Initial guess for spatial extent in simple fitting = 11.41"
[Mon Jun 10 18:16:38 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.923
[Mon Jun 10 18:16:38 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 11.41"
[Mon Jun 10 18:16:39 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src17.ximg exists
[Mon Jun 10 18:16:39 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Jun 10 18:16:39 2013] Fit fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_src17 appears to have run properly
[Mon Jun 10 18:16:39 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Jun 10 18:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Mon Jun 10 18:16:39 2013] fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Jun 10 18:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Mon Jun 10 18:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:48 2013] Spatial fit model total counts = 400.968000, observed total counts = 429.000000
[Mon Jun 10 18:16:48 2013] Offset between fit and detection position for source 17 = 0.210061 pixels
[Mon Jun 10 18:16:48 2013] 392.387400 total counts/ 346.469000 bgd. counts: snr = 2.466917
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.210061 pixels
  Position = (418.2, 366.2) = 10 9 1.46 -42 45 28.7
  Extent = 4.1" x 4.1", rotation angle = 0
  Source counts = 45.9 +/- 19.8
  Background counts = 346.5
  Rate = 0.002 +/- 0.0009
[Mon Jun 10 18:16:48 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:48 2013] Assessing source extent using major
[Mon Jun 10 18:16:48 2013] Source does appear to be extended
[Mon Jun 10 18:16:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:17:03 2013] XMMSAS src. selection expression = ellipse(36331.212860, 31814.605200, 244.534207, 244.534207, 0.000000, X, Y)
[Mon Jun 10 18:17:03 2013] Not overwriting source region fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src17_src.reg
[Mon Jun 10 18:17:03 2013] Extracting stamp from image fullrun_pn_xmm0501210101_pi300-10000_cl_sm2.00.img.gz, (404, 352) - (432, 380)
[Mon Jun 10 18:17:03 2013] XMMSAS bgd. selection expression = annulus(36331.212860, 31814.605200, 407.557012, 815.114023, X, Y)
[Mon Jun 10 18:17:03 2013] Writing fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src17.gif
[Mon Jun 10 18:17:05 2013] ../../xmm0501210101/products/events/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0501210101/products/events/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Mon Jun 10 18:17:05 2013] Mean detx,y = (10893.40, 1739.64) 
[Mon Jun 10 18:17:05 2013] ../../xmm0501210101/products/images/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src17_src.img and ../../xmm0501210101/products/images/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Mon Jun 10 18:17:05 2013] ../../xmm0501210101/products/spectra/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0501210101/products/spectra/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Mon Jun 10 18:17:05 2013] Setting source spectrum file to fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Jun 10 18:17:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Jun 10 18:17:05 2013] ../../xmm0501210101/products/lightcurves/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0501210101/products/lightcurves/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Mon Jun 10 18:17:11 2013] Not generating rmf since there are only 45 counts
[Mon Jun 10 18:17:11 2013] rmf not generated due to insufficient counts
[Mon Jun 10 18:17:11 2013] fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src17.arf exists, delete to re-create
[Mon Jun 10 18:28:23 2013] Updating aperture counts using extracted products
[Mon Jun 10 18:28:23 2013] Total counts from fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 161.00
[Mon Jun 10 18:28:23 2013] Total counts from fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 198.00
[Mon Jun 10 18:28:23 2013] Got source and background scale factors 187200.000000, 1260818.000000
[Mon Jun 10 18:28:23 2013] User source parameters:
  Position = (418.2, 366.2) = 10 9 1.46 -42 45 28.7
  Extent = 4.1" x 4.1", rotation angle = 0
  Source aperture counts = 131.6 +/- 13.7
  Background aperture counts = 29.4
  Rate = 0.006 +/- 0.0006

[Mon Jun 10 18:28:26 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 18:28:26 2013] Using photon index=1.80, rate=0.00217, arf fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src17.arf
[Mon Jun 10 18:28:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 18:28:26 2013] Updating source flux to 1.6e-14
[Mon Jun 10 18:28:39 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 18:28:42 2013] xmm0501210101/analysis//spectral/fullrun_pn_xmm0501210101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete