[Mon Jun 10 18:15:56 2013] Detection parameters:
  Position = (180.8, 463.1) = 10 10 35.13 -42 38 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.2 +/- 10.0
  Background counts = 11.8
  Rate = 0.002 +/- 0.0004

[Mon Jun 10 18:15:56 2013] Off-axis axis estimate = 14.67'
[Mon Jun 10 18:16:15 2013] Using EEF radius (= 13.76 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:15 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 18:16:15 2013] Initial guess for spatial extent in simple fitting = 13.76"
[Mon Jun 10 18:16:15 2013] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.043
[Mon Jun 10 18:16:15 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 13.76"
[Mon Jun 10 18:16:15 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src23.ximg exists
[Mon Jun 10 18:16:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src23.csv
[Mon Jun 10 18:16:15 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src23_1.ximg exists
[Mon Jun 10 18:16:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src23.csv
[Mon Jun 10 18:16:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:16 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Mon Jun 10 18:16:16 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Mon Jun 10 18:16:16 2013] Fit fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Mon Jun 10 18:16:29 2013] Spatial fit model total counts = 191.510000, observed total counts = 176.000000
[Mon Jun 10 18:16:29 2013] Offset between fit and detection position for source 9 = 0.443223 pixels
[Mon Jun 10 18:16:29 2013] 192.557800 total counts/ 158.924000 bgd. counts: snr = 2.667972
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.443223 pixels
  Position = (181.2, 463.0) = 10 10 34.96 -42 38 27.8
  Extent = 6.9 (3.9-11.3)", rotation angle = 0
  Source counts = 33.6 +/- 13.9
  Background counts = 158.9
  Rate = 0.001 +/- 0.0005
[Mon Jun 10 18:16:29 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:29 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 18:16:29 2013] Source does appear to be extended
[Mon Jun 10 18:16:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:16:40 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:40 2013] Initial guess for spatial extent in simple fitting = 6.94"
[Mon Jun 10 18:16:40 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.911
[Mon Jun 10 18:16:40 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 6.94"
[Mon Jun 10 18:16:41 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src21.ximg exists
[Mon Jun 10 18:16:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src21.csv
[Mon Jun 10 18:16:41 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Jun 10 18:16:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src21.csv
[Mon Jun 10 18:16:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:41 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Jun 10 18:16:41 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Jun 10 18:16:41 2013] Fit fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Mon Jun 10 18:16:54 2013] Spatial fit model total counts = 145.267000, observed total counts = 138.000000
[Mon Jun 10 18:16:54 2013] Offset between fit and detection position for source 9 = 0.109717 pixels
[Mon Jun 10 18:16:54 2013] 147.192400 total counts/ 111.704000 bgd. counts: snr = 3.357779
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.109717 pixels
  Position = (181.2, 462.9) = 10 10 34.97 -42 38 28.3
  Extent = 7.3 (4.0-11.9)", rotation angle = 0
  Source counts = 35.5 +/- 12.1
  Background counts = 111.7
  Rate = 0.001 +/- 0.0005
[Mon Jun 10 18:16:54 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:54 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 18:16:54 2013] Source does appear to be extended
[Mon Jun 10 18:16:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:17:14 2013] XMMSAS src. selection expression = ellipse(15715.998420, 40223.847000, 435.124213, 435.124213, 0.000000, X, Y)
[Mon Jun 10 18:17:14 2013] Not overwriting source region fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src9_src.reg
[Mon Jun 10 18:17:14 2013] Extracting stamp from image fullrun_mos2_xmm0501210101_pi300-10000_cl_sm2.00.img.gz, (156, 438) - (206, 488)
[Mon Jun 10 18:17:14 2013] XMMSAS bgd. selection expression = annulus(15715.998420, 40223.847000, 725.207021, 1450.414042, X, Y)
[Mon Jun 10 18:17:14 2013] Writing fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src9.gif
[Mon Jun 10 18:19:14 2013] Mean detx,y = (2782.61, 15870.16) 
[Mon Jun 10 18:19:15 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 18:19:24 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 18:19:24 2013] Setting source spectrum file to fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Jun 10 18:19:24 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon Jun 10 18:27:35 2013] Not generating rmf since there are only 35 counts
[Mon Jun 10 18:27:35 2013] rmf not generated due to insufficient counts
[Mon Jun 10 18:28:32 2013] Updating aperture counts using extracted products
[Mon Jun 10 18:28:32 2013] Total counts from fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 70.00
[Mon Jun 10 18:28:32 2013] Total counts from fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src9_bgd.pi.gz = 240.00
[Mon Jun 10 18:28:32 2013] Got source and background scale factors 596800.000000, 3422831.000000
[Mon Jun 10 18:28:32 2013] User source parameters:
  Position = (181.2, 462.9) = 10 10 34.97 -42 38 28.3
  Extent = 7.3 (4.0-11.9)", rotation angle = 0
  Source aperture counts = 28.2 +/- 9.4
  Background aperture counts = 41.8
  Rate = 0.001 +/- 0.0004

[Mon Jun 10 18:28:32 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 18:28:32 2013] Using photon index=1.80, rate=0.00139, arf fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src9.arf
[Mon Jun 10 18:28:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 18:28:32 2013] Updating source flux to 5.8e-14
[Mon Jun 10 18:28:37 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 18:28:39 2013] xmm0501210101/analysis//spectral/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete