[Mon Jun 10 18:15:56 2013] Detection parameters:
  Position = (303.3, 130.3) = 10 9 46.83 -43 2 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.2 +/- 9.8
  Background counts = 10.1
  Rate = 0.002 +/- 0.0004

[Mon Jun 10 18:15:56 2013] Off-axis axis estimate = 12.20'
[Mon Jun 10 18:16:15 2013] Using EEF radius (= 12.53 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:15 2013] Initial guess for spatial extent in simple fitting = 12.53"
[Mon Jun 10 18:16:15 2013] source mask rpix=2.9, npix_max = 45, mask sum = 45, frac = 0.985
[Mon Jun 10 18:16:15 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 12.53"
[Mon Jun 10 18:16:15 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src21.ximg exists
[Mon Jun 10 18:16:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src21.csv
[Mon Jun 10 18:16:15 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Jun 10 18:16:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src21.csv
[Mon Jun 10 18:16:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:16 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Jun 10 18:16:16 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Jun 10 18:16:16 2013] Fit fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Jun 10 18:16:29 2013] Spatial fit model total counts = 146.047000, observed total counts = 139.000000
[Mon Jun 10 18:16:29 2013] Offset between fit and detection position for source 24 = 2.627029 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 2.627029 pixels
  Position = (300.6, 130.4) = 10 9 47.87 -43 2 35.3
  Extent = 25.1 (25.0-50.1)", rotation angle = 0
  Source counts = 152.8 +/- 12.4
  Background counts = 0.0
  Rate = 0.006 +/- 0.0005
 Deleting source due to low signal-to-noise ratio