[Mon Jun 10 18:15:56 2013] Detection parameters:
  Position = (361.7, 235.5) = 10 9 23.70 -42 54 56.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.9 +/- 9.9
  Background counts = 13.7
  Rate = 0.002 +/- 0.0005

[Mon Jun 10 18:15:56 2013] Off-axis axis estimate = 6.47'
[Mon Jun 10 18:16:15 2013] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:15 2013] Initial guess for spatial extent in simple fitting = 9.66"
[Mon Jun 10 18:16:15 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.844
[Mon Jun 10 18:16:15 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 9.66"
[Mon Jun 10 18:16:15 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src17.ximg exists
[Mon Jun 10 18:16:15 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Jun 10 18:16:15 2013] Fit fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src17 appears to have run properly
[Mon Jun 10 18:16:15 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Jun 10 18:16:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Jun 10 18:16:15 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Jun 10 18:16:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Jun 10 18:16:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:29 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 14.146269 pixels away
[Mon Jun 10 18:16:29 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:29 2013] Assessing source extent using major
[Mon Jun 10 18:16:29 2013] Source does appear to be extended
[Mon Jun 10 18:16:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:16:40 2013] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:40 2013] Initial guess for spatial extent in simple fitting = 9.66"
[Mon Jun 10 18:16:40 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.844
[Mon Jun 10 18:16:40 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 9.66"
[Mon Jun 10 18:16:41 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src16.ximg exists
[Mon Jun 10 18:16:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src16.csv
[Mon Jun 10 18:16:41 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src16_1.ximg exists
[Mon Jun 10 18:16:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src16.csv
[Mon Jun 10 18:16:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:41 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Mon Jun 10 18:16:41 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Mon Jun 10 18:16:41 2013] Fit fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Mon Jun 10 18:16:54 2013] Spatial fit model total counts = 171.575000, observed total counts = 163.000000
[Mon Jun 10 18:16:54 2013] Offset between fit and detection position for source 21 = 0.411266 pixels
[Mon Jun 10 18:16:54 2013] 167.112200 total counts/ 135.735000 bgd. counts: snr = 2.693198
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.411266 pixels
  Position = (361.3, 235.7) = 10 9 23.85 -42 54 57.0
  Extent = 5.8 (2.4-8.8)", rotation angle = 0
  Source counts = 31.4 +/- 12.9
  Background counts = 135.7
  Rate = 0.001 +/- 0.0005
[Mon Jun 10 18:16:54 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:54 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 18:16:54 2013] Source does appear to be extended
[Mon Jun 10 18:16:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:17:14 2013] XMMSAS src. selection expression = ellipse(31386.850800, 20457.982000, 350.096410, 350.096410, 0.000000, X, Y)
[Mon Jun 10 18:17:14 2013] Not overwriting source region fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src21_src.reg
[Mon Jun 10 18:17:14 2013] Extracting stamp from image fullrun_mos2_xmm0501210101_pi300-10000_cl_sm2.00.img.gz, (341, 216) - (381, 256)
[Mon Jun 10 18:17:14 2013] XMMSAS bgd. selection expression = annulus(31386.850800, 20457.982000, 583.494017, 1166.988034, X, Y)
[Mon Jun 10 18:17:14 2013] Writing fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src21.gif
[Mon Jun 10 18:18:04 2013] Mean detx,y = (-768.19, -9109.91) 
[Mon Jun 10 18:18:05 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 18:18:20 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 18:18:20 2013] Setting source spectrum file to fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Jun 10 18:18:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon Jun 10 18:27:22 2013] Not generating rmf since there are only 31 counts
[Mon Jun 10 18:27:22 2013] rmf not generated due to insufficient counts
[Mon Jun 10 18:28:31 2013] Updating aperture counts using extracted products
[Mon Jun 10 18:28:31 2013] Total counts from fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 57.00
[Mon Jun 10 18:28:31 2013] Total counts from fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 171.00
[Mon Jun 10 18:28:31 2013] Got source and background scale factors 382400.000000, 2803667.000000
[Mon Jun 10 18:28:31 2013] User source parameters:
  Position = (361.3, 235.7) = 10 9 23.85 -42 54 57.0
  Extent = 5.8 (2.4-8.8)", rotation angle = 0
  Source aperture counts = 33.7 +/- 8.6
  Background aperture counts = 23.3
  Rate = 0.001 +/- 0.0003

[Mon Jun 10 18:28:32 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 18:28:32 2013] Using photon index=1.80, rate=0.00123, arf fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src21.arf
[Mon Jun 10 18:28:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 18:28:32 2013] Updating source flux to 2.5e-14
[Mon Jun 10 18:28:37 2013] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 18:28:39 2013] xmm0501210101/analysis//spectral/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete