[Mon Jun 10 18:15:56 2013] Detection parameters:
  Position = (386.8, 271.1) = 10 9 13.77 -42 52 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.6 +/- 12.7
  Background counts = 14.2
  Rate = 0.005 +/- 0.0007

[Mon Jun 10 18:15:56 2013] Off-axis axis estimate = 6.71'
[Mon Jun 10 18:16:15 2013] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:15 2013] Initial guess for spatial extent in simple fitting = 9.78"
[Mon Jun 10 18:16:15 2013] source mask rpix=2.2, npix_max = 30, mask sum = 28, frac = 0.926
[Mon Jun 10 18:16:15 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 9.78"
[Mon Jun 10 18:16:15 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src9.ximg exists
[Mon Jun 10 18:16:15 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Jun 10 18:16:15 2013] Fit fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src9 appears to have run properly
[Mon Jun 10 18:16:15 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Jun 10 18:16:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Mon Jun 10 18:16:15 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Jun 10 18:16:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Mon Jun 10 18:16:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:29 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 15.692459 pixels away
[Mon Jun 10 18:16:29 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:29 2013] Assessing source extent using major
[Mon Jun 10 18:16:29 2013] Source does appear to be extended
[Mon Jun 10 18:16:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:16:40 2013] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:40 2013] Initial guess for spatial extent in simple fitting = 9.78"
[Mon Jun 10 18:16:40 2013] source mask rpix=2.2, npix_max = 30, mask sum = 28, frac = 0.926
[Mon Jun 10 18:16:40 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 9.78"
[Mon Jun 10 18:16:41 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src9.ximg exists
[Mon Jun 10 18:16:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src9.csv
[Mon Jun 10 18:16:41 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Jun 10 18:16:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src9.csv
[Mon Jun 10 18:16:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:41 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Jun 10 18:16:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Mon Jun 10 18:16:41 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Jun 10 18:16:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Mon Jun 10 18:16:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:54 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 11.722995 pixels away
[Mon Jun 10 18:16:54 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:54 2013] Assessing source extent using major
[Mon Jun 10 18:16:54 2013] Source does appear to be extended
[Mon Jun 10 18:16:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:17:14 2013] XMMSAS src. selection expression = ellipse(33606.733673, 23540.832611, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 18:17:14 2013] Not overwriting source region fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src20_src.reg
[Mon Jun 10 18:17:14 2013] Extracting stamp from image fullrun_mos2_xmm0501210101_pi300-10000_cl_sm2.00.img.gz, (349, 234) - (424, 309)
[Mon Jun 10 18:17:14 2013] XMMSAS bgd. selection expression = annulus(33606.733673, 23540.832611, 1087.500000, 2175.000000, X, Y)
[Mon Jun 10 18:17:14 2013] Writing fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src20.gif
[Mon Jun 10 18:17:14 2013] ../../xmm0501210101/products/events/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src20_src.evt and ../../xmm0501210101/products/events/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src20_bgd.evt exist, delete to re-create
[Mon Jun 10 18:17:14 2013] Mean detx,y = (-4206.60, -7558.01) 
[Mon Jun 10 18:17:14 2013] ../../xmm0501210101/products/images/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src20_src.img and ../../xmm0501210101/products/images/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src20_bgd.img exist, delete to re-create
[Mon Jun 10 18:17:14 2013] ../../xmm0501210101/products/spectra/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src20_src_b10.pi.gz and ../../xmm0501210101/products/spectra/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src20_bgd.pi exist, delete to re-create
[Mon Jun 10 18:17:14 2013] Setting source spectrum file to fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Jun 10 18:17:14 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Jun 10 18:17:14 2013] ../../xmm0501210101/products/lightcurves/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src20_src.lc and ../../xmm0501210101/products/lightcurves/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src20_bgd.lc exist, delete to re-create
[Mon Jun 10 18:26:56 2013] Not generating rmf since there are only 89 counts
[Mon Jun 10 18:26:56 2013] rmf not generated due to insufficient counts
[Mon Jun 10 18:28:30 2013] Updating aperture counts using extracted products
[Mon Jun 10 18:28:30 2013] Total counts from fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 176.00
[Mon Jun 10 18:28:30 2013] Total counts from fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src20_bgd.pi.gz = 673.00
[Mon Jun 10 18:28:30 2013] Got source and background scale factors 1265820.000000, 10164654.000000
[Mon Jun 10 18:28:30 2013] User source parameters:
  Position = (386.8, 271.1) = 10 9 13.77 -42 52 26.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 92.2 +/- 14.3
  Background aperture counts = 83.8
  Rate = 0.004 +/- 0.0006

[Mon Jun 10 18:28:30 2013] Updating counts from extracted products
[Mon Jun 10 18:28:30 2013] Set source signif. to 92.19/9.15 = 10.07
[Mon Jun 10 18:28:32 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 18:28:32 2013] Using photon index=1.80, rate=0.00362, arf fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src20.arf
[Mon Jun 10 18:28:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 18:28:32 2013] Updating source flux to 5.8e-14
[Mon Jun 10 18:28:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 18:28:39 2013] xmm0501210101/analysis//spectral/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete