[Mon Jun 10 18:15:56 2013] Detection parameters:
  Position = (315.7, 454.3) = 10 9 41.94 -42 39 5.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.7 +/- 18.2
  Background counts = 17.9
  Rate = 0.008 +/- 0.0007

[Mon Jun 10 18:15:56 2013] Off-axis axis estimate = 11.37'
[Mon Jun 10 18:16:15 2013] Using EEF radius (= 12.11 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:15 2013] Initial guess for spatial extent in simple fitting = 12.11"
[Mon Jun 10 18:16:15 2013] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.136
[Mon Jun 10 18:16:15 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 12.11"
[Mon Jun 10 18:16:15 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src4.ximg exists
[Mon Jun 10 18:16:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src4.csv
[Mon Jun 10 18:16:15 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Jun 10 18:16:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src4.csv
[Mon Jun 10 18:16:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:15 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Jun 10 18:16:15 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Jun 10 18:16:15 2013] Fit fullrun_mos2_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Jun 10 18:16:29 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.066429 pixels away
[Mon Jun 10 18:16:29 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:29 2013] Assessing source extent using major
[Mon Jun 10 18:16:29 2013] Source does appear to be extended
[Mon Jun 10 18:16:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:16:40 2013] Using EEF radius (= 12.11 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:40 2013] Initial guess for spatial extent in simple fitting = 12.11"
[Mon Jun 10 18:16:40 2013] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.136
[Mon Jun 10 18:16:40 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 12.11"
[Mon Jun 10 18:16:40 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src4.ximg exists
[Mon Jun 10 18:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src4.csv
[Mon Jun 10 18:16:40 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Jun 10 18:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src4.csv
[Mon Jun 10 18:16:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:41 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Jun 10 18:16:41 2013] fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Jun 10 18:16:41 2013] Fit fullrun_mos2_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon Jun 10 18:16:54 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.504493 pixels away
[Mon Jun 10 18:16:54 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:54 2013] Assessing source extent using major
[Mon Jun 10 18:16:54 2013] Source does appear to be extended
[Mon Jun 10 18:16:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:17:13 2013] XMMSAS src. selection expression = ellipse(27417.215210, 39471.281860, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 18:17:13 2013] Not overwriting source region fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 10 18:17:13 2013] Extracting stamp from image fullrun_mos2_xmm0501210101_pi300-10000_cl_sm2.00.img.gz, (278, 417) - (353, 492)
[Mon Jun 10 18:17:13 2013] XMMSAS bgd. selection expression = annulus(27417.215210, 39471.281860, 1087.500000, 2175.000000, X, Y) && !ellipse(29892.137939, 40462.377747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26161.999664, 38104.706421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28546.861145, 40960.769226, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 18:17:13 2013] Writing fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src1.gif
[Mon Jun 10 18:17:14 2013] ../../xmm0501210101/products/events/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0501210101/products/events/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Jun 10 18:17:14 2013] Mean detx,y = (-6921.75, 9326.47) 
[Mon Jun 10 18:17:14 2013] ../../xmm0501210101/products/images/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0501210101/products/images/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Jun 10 18:17:14 2013] ../../xmm0501210101/products/spectra/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0501210101/products/spectra/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Jun 10 18:17:14 2013] Setting source spectrum file to fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 10 18:17:14 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 10 18:17:14 2013] ../../xmm0501210101/products/lightcurves/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0501210101/products/lightcurves/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Jun 10 18:26:34 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 18:26:34 2013] rmf not generated due to insufficient counts
[Mon Jun 10 18:28:29 2013] Updating aperture counts using extracted products
[Mon Jun 10 18:28:29 2013] Total counts from fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 292.00
[Mon Jun 10 18:28:30 2013] Total counts from fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 683.00
[Mon Jun 10 18:28:30 2013] Got source and background scale factors 1337600.000000, 7731496.000000
[Mon Jun 10 18:28:30 2013] User source parameters:
  Position = (315.7, 454.3) = 10 9 41.94 -42 39 5.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 173.8 +/- 18.1
  Background aperture counts = 118.2
  Rate = 0.007 +/- 0.0007

[Mon Jun 10 18:28:30 2013] Updating counts from extracted products
[Mon Jun 10 18:28:30 2013] Set source signif. to 173.84/10.87 = 15.99
[Mon Jun 10 18:28:32 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 18:28:32 2013] Using photon index=1.80, rate=0.00682, arf fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src1.arf
[Mon Jun 10 18:28:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 18:28:32 2013] Updating source flux to 1.5e-13
[Mon Jun 10 18:28:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 18:28:39 2013] xmm0501210101/analysis//spectral/fullrun_mos2_xmm0501210101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete