[Mon Jun 10 18:15:55 2013] Detection parameters:
  Position = (287.3, 373.9) = 10 9 53.17 -42 44 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.5 +/- 14.8
  Background counts = 16.6
  Rate = 0.006 +/- 0.0007

[Mon Jun 10 18:15:56 2013] Off-axis axis estimate = 5.53'
[Mon Jun 10 18:16:14 2013] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:14 2013] Initial guess for spatial extent in simple fitting = 9.19"
[Mon Jun 10 18:16:14 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.098
[Mon Jun 10 18:16:14 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 9.19"
[Mon Jun 10 18:16:14 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jun 10 18:16:14 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jun 10 18:16:14 2013] Fit fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src7 appears to have run properly
[Mon Jun 10 18:16:14 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon Jun 10 18:16:14 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jun 10 18:16:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon Jun 10 18:16:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:25 2013] Spatial fit model total counts = 250.511000, observed total counts = 227.000000
[Mon Jun 10 18:16:25 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 18:16:25 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:25 2013] Assessing source extent using major
[Mon Jun 10 18:16:25 2013] Source does appear to be extended
[Mon Jun 10 18:16:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:16:39 2013] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:39 2013] Initial guess for spatial extent in simple fitting = 9.19"
[Mon Jun 10 18:16:39 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.098
[Mon Jun 10 18:16:39 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 9.19"
[Mon Jun 10 18:16:40 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jun 10 18:16:40 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jun 10 18:16:40 2013] Fit fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src7 appears to have run properly
[Mon Jun 10 18:16:40 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jun 10 18:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jun 10 18:16:40 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jun 10 18:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jun 10 18:16:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:50 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 36.246821 pixels away
[Mon Jun 10 18:16:50 2013] Spatial fit model total counts = 250.521000, observed total counts = 227.000000
[Mon Jun 10 18:16:50 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 18:16:51 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:51 2013] Assessing source extent using major
[Mon Jun 10 18:16:51 2013] Source does appear to be extended
[Mon Jun 10 18:16:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:17:11 2013] XMMSAS src. selection expression = ellipse(24942.297791, 32479.814453, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 18:17:11 2013] Not overwriting source region fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src9_src.reg
[Mon Jun 10 18:17:11 2013] Extracting stamp from image fullrun_mos1_xmm0501210101_pi300-10000_cl_sm2.00.img.gz, (250, 336) - (325, 411)
[Mon Jun 10 18:17:11 2013] XMMSAS bgd. selection expression = annulus(24942.297791, 32479.814453, 1087.500000, 2175.000000, X, Y)
[Mon Jun 10 18:17:11 2013] Writing fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src9.gif
[Mon Jun 10 18:17:12 2013] ../../xmm0501210101/products/events/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0501210101/products/events/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create
[Mon Jun 10 18:17:12 2013] Mean detx,y = (4756.73, 1120.62) 
[Mon Jun 10 18:17:12 2013] ../../xmm0501210101/products/images/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src9_src.img and ../../xmm0501210101/products/images/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create
[Mon Jun 10 18:17:12 2013] ../../xmm0501210101/products/spectra/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src9_src_b10.pi.gz and ../../xmm0501210101/products/spectra/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create
[Mon Jun 10 18:17:12 2013] Setting source spectrum file to fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Jun 10 18:17:12 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon Jun 10 18:17:12 2013] ../../xmm0501210101/products/lightcurves/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0501210101/products/lightcurves/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create
[Mon Jun 10 18:17:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 18:17:13 2013] rmf not generated due to insufficient counts
[Mon Jun 10 18:17:13 2013] fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src9.arf exists, delete to re-create
[Mon Jun 10 18:28:27 2013] Updating aperture counts using extracted products
[Mon Jun 10 18:28:27 2013] Total counts from fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 178.00
[Mon Jun 10 18:28:28 2013] Total counts from fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src9_bgd.pi.gz = 751.00
[Mon Jun 10 18:28:28 2013] Got source and background scale factors 1232316.000000, 10294090.000000
[Mon Jun 10 18:28:28 2013] User source parameters:
  Position = (287.3, 373.9) = 10 9 53.17 -42 44 55.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 88.1 +/- 14.4
  Background aperture counts = 89.9
  Rate = 0.004 +/- 0.0006

[Mon Jun 10 18:28:28 2013] Updating counts from extracted products
[Mon Jun 10 18:28:28 2013] Set source signif. to 88.10/9.48 = 9.29
[Mon Jun 10 18:28:29 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 18:28:29 2013] Using photon index=1.80, rate=0.0035, arf fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src9.arf
[Mon Jun 10 18:28:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 18:28:29 2013] Updating source flux to 4.5e-14
[Mon Jun 10 18:28:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 18:28:37 2013] xmm0501210101/analysis//spectral/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete