[Mon Jun 10 18:15:55 2013] Detection parameters:
  Position = (284.4, 143.5) = 10 9 54.30 -43 1 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.4 +/- 10.3
  Background counts = 11.1
  Rate = 0.002 +/- 0.0004

[Mon Jun 10 18:15:56 2013] Off-axis axis estimate = 11.28'
[Mon Jun 10 18:16:14 2013] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:14 2013] Initial guess for spatial extent in simple fitting = 12.07"
[Mon Jun 10 18:16:14 2013] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.143
[Mon Jun 10 18:16:14 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 12.07"
[Mon Jun 10 18:16:14 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src16.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src16.csv
[Mon Jun 10 18:16:14 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src16_1.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src16.csv
[Mon Jun 10 18:16:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:15 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Mon Jun 10 18:16:15 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Mon Jun 10 18:16:15 2013] Fit fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Mon Jun 10 18:16:25 2013] Spatial fit model total counts = 147.145000, observed total counts = 148.000000
[Mon Jun 10 18:16:25 2013] Offset between fit and detection position for source 5 = 3.091961 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 3.091961 pixels
  Position = (287.4, 144.3) = 10 9 53.12 -43 1 34.6
  Extent = 19.3 (14.5-21.8)", rotation angle = 0
  Source counts = 138.5 +/- 11.8
  Background counts = 0.0
  Rate = 0.006 +/- 0.0005
 Deleting source due to low signal-to-noise ratio