[Mon Jun 10 18:15:55 2013] Detection parameters:
  Position = (262.9, 131.7) = 10 10 2.84 -43 2 27.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.0 +/- 8.8
  Background counts = 10.4
  Rate = 0.001 +/- 0.0003

[Mon Jun 10 18:15:56 2013] Off-axis axis estimate = 12.36'
[Mon Jun 10 18:16:14 2013] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:14 2013] Initial guess for spatial extent in simple fitting = 12.61"
[Mon Jun 10 18:16:14 2013] source mask rpix=2.9, npix_max = 46, mask sum = 39, frac = 0.844
[Mon Jun 10 18:16:14 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 12.61"
[Mon Jun 10 18:16:14 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src18.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src18.csv
[Mon Jun 10 18:16:14 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src18.csv
[Mon Jun 10 18:16:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:15 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon Jun 10 18:16:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jun 10 18:16:15 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Jun 10 18:16:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jun 10 18:16:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:25 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.652877 pixels away
[Mon Jun 10 18:16:25 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:25 2013] Assessing source extent using major
[Mon Jun 10 18:16:25 2013] Source does appear to be extended
[Mon Jun 10 18:16:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:16:39 2013] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 18:16:39 2013] Initial guess for spatial extent in simple fitting = 12.61"
[Mon Jun 10 18:16:39 2013] source mask rpix=2.9, npix_max = 46, mask sum = 39, frac = 0.844
[Mon Jun 10 18:16:39 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 12.61"
[Mon Jun 10 18:16:40 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src17.ximg exists
[Mon Jun 10 18:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src17.csv
[Mon Jun 10 18:16:40 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Jun 10 18:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src17.csv
[Mon Jun 10 18:16:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:40 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Jun 10 18:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Mon Jun 10 18:16:40 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Jun 10 18:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Mon Jun 10 18:16:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:51 2013] Spatial fit model total counts = 128.409000, observed total counts = 109.000000
[Mon Jun 10 18:16:51 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 18:16:51 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:51 2013] Assessing source extent using major
[Mon Jun 10 18:16:51 2013] Source does appear to be extended
[Mon Jun 10 18:16:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:17:11 2013] XMMSAS src. selection expression = ellipse(22826.539459, 11412.248581, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 18:17:11 2013] Not overwriting source region fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src3_src.reg
[Mon Jun 10 18:17:11 2013] Extracting stamp from image fullrun_mos1_xmm0501210101_pi300-10000_cl_sm2.00.img.gz, (225, 94) - (300, 169)
[Mon Jun 10 18:17:11 2013] XMMSAS bgd. selection expression = annulus(22826.539459, 11412.248581, 1087.500000, 2175.000000, X, Y)
[Mon Jun 10 18:17:11 2013] Writing fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src3.gif
[Mon Jun 10 18:17:12 2013] ../../xmm0501210101/products/events/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0501210101/products/events/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Jun 10 18:17:12 2013] Mean detx,y = (-12256.38, -11364.49) 
[Mon Jun 10 18:17:12 2013] ../../xmm0501210101/products/images/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0501210101/products/images/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Jun 10 18:17:12 2013] ../../xmm0501210101/products/spectra/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0501210101/products/spectra/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Jun 10 18:17:12 2013] Setting source spectrum file to fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun 10 18:17:12 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jun 10 18:17:12 2013] ../../xmm0501210101/products/lightcurves/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0501210101/products/lightcurves/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Jun 10 18:17:13 2013] Not generating rmf since there are only 33 counts
[Mon Jun 10 18:17:13 2013] rmf not generated due to insufficient counts
[Mon Jun 10 18:17:13 2013] fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Mon Jun 10 18:28:29 2013] Updating aperture counts using extracted products
[Mon Jun 10 18:28:29 2013] Total counts from fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 87.00
[Mon Jun 10 18:28:29 2013] Total counts from fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 307.00
[Mon Jun 10 18:28:29 2013] Got source and background scale factors 1034828.000000, 5142443.000000
[Mon Jun 10 18:28:29 2013] User source parameters:
  Position = (262.9, 131.7) = 10 10 2.84 -43 2 27.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 25.2 +/- 10.4
  Background aperture counts = 61.8
  Rate = 0.001 +/- 0.0004

[Mon Jun 10 18:28:29 2013] Updating counts from extracted products
[Mon Jun 10 18:28:29 2013] Set source signif. to 25.22/7.86 = 3.21
[Mon Jun 10 18:28:29 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 18:28:29 2013] Using photon index=1.80, rate=0.001, arf fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src3.arf
[Mon Jun 10 18:28:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 18:28:29 2013] Updating source flux to 4.1e-14
[Mon Jun 10 18:28:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 18:28:37 2013] xmm0501210101/analysis//spectral/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete