[Mon Jun 10 18:15:55 2013] Detection parameters:
  Position = (240.0, 348.3) = 10 10 11.84 -42 46 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.6 +/- 12.8
  Background counts = 16.1
  Rate = 0.005 +/- 0.0006

[Mon Jun 10 18:15:56 2013] Off-axis axis estimate = 5.57'
[Mon Jun 10 18:16:14 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:14 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Mon Jun 10 18:16:14 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.094
[Mon Jun 10 18:16:14 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 9.21"
[Mon Jun 10 18:16:14 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src10.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src10.csv
[Mon Jun 10 18:16:14 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src10.csv
[Mon Jun 10 18:16:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:15 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Jun 10 18:16:15 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Jun 10 18:16:15 2013] Fit fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Mon Jun 10 18:16:25 2013] Spatial fit model total counts = 201.999000, observed total counts = 202.000000
[Mon Jun 10 18:16:25 2013] Offset between fit and detection position for source 12 = 0.176401 pixels
[Mon Jun 10 18:16:25 2013] 200.545600 total counts/ 148.297000 bgd. counts: snr = 4.290506
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.176401 pixels
  Position = (239.8, 348.2) = 10 10 11.91 -42 46 47.5
  Extent = 4.3 (3.1-5.8)", rotation angle = 0
  Source counts = 52.2 +/- 14.2
  Background counts = 148.3
  Rate = 0.002 +/- 0.0006
[Mon Jun 10 18:16:25 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:25 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 18:16:25 2013] Source does appear to be extended
[Mon Jun 10 18:16:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:16:39 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:39 2013] Initial guess for spatial extent in simple fitting = 4.30"
[Mon Jun 10 18:16:39 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.017
[Mon Jun 10 18:16:39 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 4.30"
[Mon Jun 10 18:16:40 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src10.ximg exists
[Mon Jun 10 18:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src10.csv
[Mon Jun 10 18:16:40 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Jun 10 18:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src10.csv
[Mon Jun 10 18:16:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:40 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Jun 10 18:16:40 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Jun 10 18:16:40 2013] Fit fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Mon Jun 10 18:16:50 2013] Spatial fit model total counts = 203.904000, observed total counts = 204.000000
[Mon Jun 10 18:16:50 2013] Offset between fit and detection position for source 12 = 0.011080 pixels
[Mon Jun 10 18:16:50 2013] 202.750800 total counts/ 151.109000 bgd. counts: snr = 4.201034
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.011080 pixels
  Position = (239.8, 348.2) = 10 10 11.91 -42 46 47.6
  Extent = 4.2 (3.1-5.7)", rotation angle = 0
  Source counts = 51.6 +/- 14.2
  Background counts = 151.1
  Rate = 0.002 +/- 0.0006
[Mon Jun 10 18:16:51 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:51 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 18:16:51 2013] Source does appear to be extended
[Mon Jun 10 18:16:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:17:11 2013] XMMSAS src. selection expression = ellipse(20816.230000, 30247.431000, 254.981407, 254.981407, 0.000000, X, Y)
[Mon Jun 10 18:17:11 2013] Not overwriting source region fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src12_src.reg
[Mon Jun 10 18:17:11 2013] Extracting stamp from image fullrun_mos1_xmm0501210101_pi300-10000_cl_sm2.00.img.gz, (225, 334) - (254, 363)
[Mon Jun 10 18:17:11 2013] XMMSAS bgd. selection expression = annulus(20816.230000, 30247.431000, 424.969012, 849.938024, X, Y) && !ellipse(21721.803600, 31430.025200, 380.499211, 380.499211, 0.000000, X, Y)
[Mon Jun 10 18:17:11 2013] Writing fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src12.gif
[Mon Jun 10 18:17:12 2013] ../../xmm0501210101/products/events/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0501210101/products/events/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create
[Mon Jun 10 18:17:12 2013] Mean detx,y = (4916.20, -3554.98) 
[Mon Jun 10 18:17:12 2013] ../../xmm0501210101/products/images/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src12_src.img and ../../xmm0501210101/products/images/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create
[Mon Jun 10 18:17:12 2013] ../../xmm0501210101/products/spectra/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src12_src_b10.pi.gz and ../../xmm0501210101/products/spectra/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create
[Mon Jun 10 18:17:12 2013] Setting source spectrum file to fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Jun 10 18:17:12 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon Jun 10 18:17:12 2013] ../../xmm0501210101/products/lightcurves/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0501210101/products/lightcurves/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create
[Mon Jun 10 18:17:13 2013] Not generating rmf since there are only 51 counts
[Mon Jun 10 18:17:13 2013] rmf not generated due to insufficient counts
[Mon Jun 10 18:17:13 2013] fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src12.arf exists, delete to re-create
[Mon Jun 10 18:28:28 2013] Updating aperture counts using extracted products
[Mon Jun 10 18:28:28 2013] Total counts from fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 65.00
[Mon Jun 10 18:28:28 2013] Total counts from fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src12_bgd.pi.gz = 119.00
[Mon Jun 10 18:28:28 2013] Got source and background scale factors 206400.000000, 1699200.000000
[Mon Jun 10 18:28:28 2013] User source parameters:
  Position = (239.8, 348.2) = 10 10 11.91 -42 46 47.6
  Extent = 4.2 (3.1-5.7)", rotation angle = 0
  Source aperture counts = 50.5 +/- 9.1
  Background aperture counts = 14.5
  Rate = 0.002 +/- 0.0004

[Mon Jun 10 18:28:29 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 18:28:29 2013] Using photon index=1.80, rate=0.00205, arf fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src12.arf
[Mon Jun 10 18:28:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 18:28:29 2013] Updating source flux to 4.3e-14
[Mon Jun 10 18:28:34 2013] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 18:28:37 2013] xmm0501210101/analysis//spectral/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete