[Mon Jun 10 18:15:55 2013] Detection parameters:
  Position = (315.5, 454.4) = 10 9 42.02 -42 39 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.8 +/- 15.4
  Background counts = 16.1
  Rate = 0.01 +/- 0.001

[Mon Jun 10 18:15:56 2013] Off-axis axis estimate = 11.37'
[Mon Jun 10 18:16:14 2013] Using EEF radius (= 12.11 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:14 2013] Initial guess for spatial extent in simple fitting = 12.11"
[Mon Jun 10 18:16:14 2013] source mask rpix=2.8, npix_max = 43, mask sum = 43, frac = 0.996
[Mon Jun 10 18:16:14 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 12.11"
[Mon Jun 10 18:16:14 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src3.csv
[Mon Jun 10 18:16:14 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src3.csv
[Mon Jun 10 18:16:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:14 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 10 18:16:14 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 10 18:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 10 18:16:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501210101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:25 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.876102 pixels away
[Mon Jun 10 18:16:25 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:25 2013] Assessing source extent using major
[Mon Jun 10 18:16:25 2013] Source does appear to be extended
[Mon Jun 10 18:16:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:16:39 2013] Using EEF radius (= 12.11 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:16:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 18:16:39 2013] Initial guess for spatial extent in simple fitting = 12.11"
[Mon Jun 10 18:16:39 2013] source mask rpix=2.8, npix_max = 43, mask sum = 43, frac = 0.996
[Mon Jun 10 18:16:39 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 12.11"
[Mon Jun 10 18:16:40 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun 10 18:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src3.csv
[Mon Jun 10 18:16:40 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun 10 18:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src3.csv
[Mon Jun 10 18:16:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:40 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 10 18:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 10 18:16:40 2013] fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 10 18:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 10 18:16:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501210101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:16:50 2013] Warning, spatial fit 3 centroid is now closest to src. 2
[Mon Jun 10 18:16:51 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:16:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:16:51 2013] Assessing source extent using major
[Mon Jun 10 18:16:51 2013] Source does appear to be extended
[Mon Jun 10 18:16:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:17:11 2013] XMMSAS src. selection expression = ellipse(27400.015930, 39480.484192, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 18:17:11 2013] Not overwriting source region fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 10 18:17:11 2013] Extracting stamp from image fullrun_mos1_xmm0501210101_pi300-10000_cl_sm2.00.img.gz, (278, 417) - (353, 492)
[Mon Jun 10 18:17:11 2013] XMMSAS bgd. selection expression = annulus(27400.015930, 39480.484192, 1087.500000, 2175.000000, X, Y) && !ellipse(29846.114000, 40451.412600, 645.569619, 320.538409, 7.245017, X, Y) && !ellipse(26153.200897, 38128.532654, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 18:17:11 2013] Writing fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src1.gif
[Mon Jun 10 18:17:12 2013] ../../xmm0501210101/products/events/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0501210101/products/events/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Jun 10 18:17:12 2013] Mean detx,y = (9532.15, 6853.61) 
[Mon Jun 10 18:17:12 2013] ../../xmm0501210101/products/images/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0501210101/products/images/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Jun 10 18:17:12 2013] ../../xmm0501210101/products/spectra/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0501210101/products/spectra/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Jun 10 18:17:12 2013] Setting source spectrum file to fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 10 18:17:12 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 10 18:17:12 2013] ../../xmm0501210101/products/lightcurves/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0501210101/products/lightcurves/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Jun 10 18:17:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 18:17:13 2013] rmf not generated due to insufficient counts
[Mon Jun 10 18:17:13 2013] fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Mon Jun 10 18:28:27 2013] Updating aperture counts using extracted products
[Mon Jun 10 18:28:27 2013] Total counts from fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 210.00
[Mon Jun 10 18:28:27 2013] Total counts from fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 669.00
[Mon Jun 10 18:28:27 2013] Got source and background scale factors 1080862.000000, 8529774.000000
[Mon Jun 10 18:28:27 2013] User source parameters:
  Position = (315.5, 454.4) = 10 9 42.02 -42 39 4.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 125.2 +/- 15.5
  Background aperture counts = 84.8
  Rate = 0.005 +/- 0.0006

[Mon Jun 10 18:28:27 2013] Updating counts from extracted products
[Mon Jun 10 18:28:27 2013] Set source signif. to 125.23/9.21 = 13.60
[Mon Jun 10 18:28:29 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 18:28:29 2013] Using photon index=1.80, rate=0.00498, arf fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src1.arf
[Mon Jun 10 18:28:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 18:28:29 2013] Updating source flux to 1.1e-13
[Mon Jun 10 18:28:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 18:28:37 2013] xmm0501210101/analysis//spectral/fullrun_mos1_xmm0501210101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete