[Mon May 13 21:10:01 2013] Detection parameters:
  Position = (224.9, 363.2) = 9 58 49.53 2 16 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.6 +/- 9.5
  Background counts = 16.2
  Rate = 0.002 +/- 0.0004

[Mon May 13 21:10:01 2013] Off-axis axis estimate = 7.10'
[Mon May 13 23:09:05 2013] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Mon May 13 23:09:05 2013] Initial guess for spatial extent in simple fitting = 9.98"
[Mon May 13 23:09:05 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.153
[Mon May 13 23:09:05 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 9.98"
[Tue May 14 00:13:10 2013] fullrun_mos2_xmm0501170201_pi300-10000_cl_pass0_src32.ximg exists
[Tue May 14 00:13:10 2013] fullrun_mos2_xmm0501170201_pi300-10000_cl_pass0_src32_1.ximg exists
[Tue May 14 00:13:10 2013] Fit fullrun_mos2_xmm0501170201_pi300-10000_cl_pass0_src32 appears to have run properly
[Tue May 14 00:13:10 2013] fullrun_mos2_xmm0501170201_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Tue May 14 00:13:10 2013] fullrun_mos2_xmm0501170201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Tue May 14 00:13:10 2013] Fit fullrun_mos2_xmm0501170201_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Tue May 14 00:13:33 2013] Spatial fit model total counts = 211.104000, observed total counts = 193.000000
[Tue May 14 00:13:33 2013] Offset between fit and detection position for source 21 = 0.233304 pixels
[Tue May 14 00:13:33 2013] 207.827000 total counts/ 168.658000 bgd. counts: snr = 3.016053
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.233304 pixels
  Position = (224.7, 363.2) = 9 58 49.60 2 16 35.7
  Extent = 15.1 (7.8-20.0)" x 4.4 (2.8-7.9)", rotation angle = 69 (53-85) degrees
  Source counts = 39.2 +/- 14.4
  Background counts = 168.7
  Rate = 0.001 +/- 0.0004
[Tue May 14 00:13:33 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:13:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:13:33 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:13:33 2013] Source does appear to be extended
[Tue May 14 00:13:33 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Tue May 14 03:07:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 03:07:31 2013] Initial guess for spatial extent in simple fitting = 9.73"
[Tue May 14 03:07:31 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.001
[Tue May 14 03:07:31 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 9.73"
[Tue May 14 04:15:43 2013] fullrun_mos2_xmm0501170201_pi300-10000_cl_pass1_src32.ximg exists
[Tue May 14 04:15:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501170201_pi300-10000_cl_pass1_src32.csv
[Tue May 14 04:15:43 2013] fullrun_mos2_xmm0501170201_pi300-10000_cl_pass1_src32_1.ximg exists
[Tue May 14 04:15:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501170201_pi300-10000_cl_pass1_src32.csv
[Tue May 14 04:15:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501170201_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501170201_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:15:43 2013] fullrun_mos2_xmm0501170201_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Tue May 14 04:15:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501170201_pi300-10000_cl_pass1_tfrozen_src32.csv
[Tue May 14 04:15:43 2013] fullrun_mos2_xmm0501170201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Tue May 14 04:15:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501170201_pi300-10000_cl_pass1_tfrozen_src32.csv
[Tue May 14 04:15:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501170201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501170201_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:16:17 2013] Warning, spatial fit 32 centroid is now closest to src. 28
[Tue May 14 04:16:17 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:16:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:16:17 2013] Assessing source extent using major axis lower bound
[Tue May 14 04:16:17 2013] Source does appear to be extended
[Tue May 14 04:16:17 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Tue May 14 06:21:53 2013] XMMSAS src. selection expression = ellipse(19500.194800, 31550.968000, 905.268026, 262.877408, 68.746800, X, Y)
[Tue May 14 06:21:53 2013] Writing source region out to fullrun_mos2_xmm0501170201_pi300-10000_pass1_cl_src21_src.reg
[Tue May 14 06:21:53 2013] Extracting stamp from image fullrun_mos2_xmm0501170201_pi300-10000_cl_sm2.00.img.gz, (173, 311) - (277, 415)
[Tue May 14 06:21:53 2013] XMMSAS bgd. selection expression = annulus(19500.194800, 31550.968000, 1508.780043, 3017.560087, X, Y) && !ellipse(16777.956589, 29690.501740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20363.711000, 30680.702600, 788.324823, 438.225613, 0.201302, X, Y) && !ellipse(22340.331200, 32251.341000, 233.222407, 233.222407, 0.000000, X, Y)
[Tue May 14 06:21:53 2013] Writing fullrun_mos2_xmm0501170201_pi300-10000_pass1_cl_src21.gif
[Tue May 14 06:33:26 2013] Mean detx,y = (5396.62, 5807.93) 
[Tue May 14 06:33:28 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 06:33:57 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 06:33:58 2013] Setting source spectrum file to fullrun_mos2_xmm0501170201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue May 14 06:33:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0501170201_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue May 14 06:47:44 2013] Not generating rmf since there are only 39 counts
[Tue May 14 06:47:44 2013] rmf not generated due to insufficient counts
[Tue May 14 06:51:14 2013] Updating aperture counts using extracted products
[Tue May 14 06:51:14 2013] Total counts from fullrun_mos2_xmm0501170201_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 96.00
[Tue May 14 06:51:14 2013] Total counts from fullrun_mos2_xmm0501170201_pi300-10000_pass1_cl_src21_bgd.pi.gz = 1450.00
[Tue May 14 06:51:14 2013] Got source and background scale factors 722484.000000, 18375318.000000
[Tue May 14 06:51:14 2013] User source parameters:
  Position = (224.7, 363.2) = 9 58 49.60 2 16 35.7
  Extent = 15.1 (7.8-20.0)" x 4.4 (2.8-7.9)", rotation angle = 69 (53-85) degrees
  Source aperture counts = 39.0 +/- 10.8
  Background aperture counts = 57.0
  Rate = 0.001 +/- 0.0003

[Tue May 14 06:51:18 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 06:51:18 2013] Using photon index=1.80, rate=0.00111, arf fullrun_mos2_xmm0501170201_pi300-10000_pass1_cl_src21.arf
[Tue May 14 06:51:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 06:51:18 2013] Updating source flux to 2.4e-14
[Tue May 14 06:51:25 2013] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 14 06:51:29 2013] xmm0501170201/analysis//spectral/fullrun_mos2_xmm0501170201_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete