[Mon May 13 21:09:33 2013] Detection parameters:
  Position = (294.8, 351.0) = 9 58 29.26 2 15 42.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.9 +/- 11.4
  Background counts = 16.2
  Rate = 0.002 +/- 0.0004

[Mon May 13 21:09:33 2013] Off-axis axis estimate = 3.82'
[Mon May 13 22:13:24 2013] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Mon May 13 22:13:24 2013] Initial guess for spatial extent in simple fitting = 8.34"
[Mon May 13 22:13:24 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.856
[Mon May 13 22:13:24 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 8.34"
[Mon May 13 23:09:05 2013] fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_src23.ximg exists
[Mon May 13 23:09:05 2013] fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_src23_1.ximg exists
[Mon May 13 23:09:05 2013] Fit fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_src23 appears to have run properly
[Mon May 13 23:09:05 2013] fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Mon May 13 23:09:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_tfrozen_src23.csv
[Mon May 13 23:09:05 2013] fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Mon May 13 23:09:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_tfrozen_src23.csv
[Mon May 13 23:09:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:13:26 2013] Spatial fit model total counts = 325.571000, observed total counts = 281.000000
[Tue May 14 00:13:26 2013] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 14 00:13:26 2013] Spatial fit model total counts = 255.596000, observed total counts = 232.000000
[Tue May 14 00:13:26 2013] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 14 00:13:26 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:13:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:13:26 2013] Assessing source extent using major
[Tue May 14 00:13:26 2013] Source does appear to be extended
[Tue May 14 00:13:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 01:51:19 2013] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Tue May 14 01:51:19 2013] Initial guess for spatial extent in simple fitting = 8.34"
[Tue May 14 01:51:19 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.856
[Tue May 14 01:51:19 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 8.34"
[Tue May 14 03:07:30 2013] fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_src23.ximg exists
[Tue May 14 03:07:30 2013] fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_src23_1.ximg exists
[Tue May 14 03:07:30 2013] Fit fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_src23 appears to have run properly
[Tue May 14 03:07:30 2013] fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Tue May 14 03:07:30 2013] fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Tue May 14 03:07:30 2013] Fit fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Tue May 14 04:16:06 2013] Spatial fit model total counts = 330.141000, observed total counts = 281.000000
[Tue May 14 04:16:06 2013] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 14 04:16:06 2013] Spatial fit model total counts = 247.102000, observed total counts = 232.000000
[Tue May 14 04:16:06 2013] Offset between fit and detection position for source 24 = 4.777136 pixels
[Tue May 14 04:16:06 2013] 284.387000 total counts/ 152.711000 bgd. counts: snr = 10.655442
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 4.777136 pixels
  Position = (292.0, 347.1) = 9 58 30.07 2 15 25.5
  Extent = 16.3 (16.3-16.3)", rotation angle = 0
  Source counts = 131.7 +/- 16.9
  Background counts = 152.7
  Rate = 0.004 +/- 0.0005
[Tue May 14 04:16:06 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:16:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:16:06 2013] Assessing source extent using major axis lower bound
[Tue May 14 04:16:06 2013] Source does appear to be extended
[Tue May 14 04:16:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 05:42:47 2013] XMMSAS src. selection expression = ellipse(25354.636000, 30147.660000, 980.352028, 980.352028, 0.000000, X, Y)
[Tue May 14 05:42:47 2013] Writing source region out to fullrun_mos1_xmm0501170201_pi300-10000_pass1_cl_src24_src.reg
[Tue May 14 05:42:47 2013] Extracting stamp from image fullrun_mos1_xmm0501170201_pi300-10000_cl_sm2.00.img.gz, (236, 291) - (348, 403)
[Tue May 14 05:42:47 2013] XMMSAS bgd. selection expression = annulus(25354.636000, 30147.660000, 1633.920047, 3267.840094, X, Y) && !ellipse(26255.685028, 31129.373627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22343.687866, 32288.567383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27399.115200, 27437.937600, 406.636812, 406.636812, 0.000000, X, Y) && !ellipse(22627.834600, 31099.917800, 454.741613, 454.741613, 0.000000, X, Y)
[Tue May 14 05:42:47 2013] Writing fullrun_mos1_xmm0501170201_pi300-10000_pass1_cl_src24.gif
[Tue May 14 05:50:43 2013] Mean detx,y = (2845.89, -351.69) 
[Tue May 14 05:50:45 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 05:51:00 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 05:51:00 2013] Setting source spectrum file to fullrun_mos1_xmm0501170201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue May 14 05:51:00 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0501170201_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Tue May 14 06:50:57 2013] Updating aperture counts using extracted products
[Tue May 14 06:50:57 2013] Total counts from fullrun_mos1_xmm0501170201_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 215.00
[Tue May 14 06:50:57 2013] Total counts from fullrun_mos1_xmm0501170201_pi300-10000_pass1_cl_src24_bgd.pi.gz = 1615.00
[Tue May 14 06:50:57 2013] Got source and background scale factors 2803148.000000, 21516648.000000
[Tue May 14 06:50:57 2013] User source parameters:
  Position = (292.0, 347.1) = 9 58 30.07 2 15 25.5
  Extent = 16.3 (16.3-16.3)", rotation angle = 0
  Source aperture counts = 4.6 +/- 15.7
  Background aperture counts = 210.4
  Rate = 0.0001 +/- 0.0005

[Tue May 14 06:51:03 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 06:51:03 2013] Using photon index=1.80, rate=0.00379, arf fullrun_mos1_xmm0501170201_pi300-10000_pass1_cl_src24.arf
[Tue May 14 06:51:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 06:51:03 2013] Updating source flux to 3.8e-14
[Tue May 14 06:51:22 2013] Flag p found in src. 24 procflags, skipping spectral fitting
[Tue May 14 06:51:25 2013] xmm0501170201/analysis//spectral/fullrun_mos1_xmm0501170201_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete