[Mon May 13 21:09:33 2013] Detection parameters:
  Position = (302.3, 358.4) = 9 58 27.06 2 16 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.3 +/- 15.7
  Background counts = 16.6
  Rate = 0.005 +/- 0.0005

[Mon May 13 21:09:33 2013] Off-axis axis estimate = 4.35'
[Mon May 13 22:13:24 2013] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Mon May 13 22:13:24 2013] Initial guess for spatial extent in simple fitting = 8.61"
[Mon May 13 22:13:24 2013] source mask rpix=2.0, npix_max = 24, mask sum = 21, frac = 0.855
[Mon May 13 22:13:24 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 8.61"
[Mon May 13 23:09:05 2013] fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_src7.ximg exists
[Mon May 13 23:09:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_src7.csv
[Mon May 13 23:09:05 2013] fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon May 13 23:09:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_src7.csv
[Mon May 13 23:09:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 23:09:05 2013] fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon May 13 23:09:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon May 13 23:09:05 2013] fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon May 13 23:09:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon May 13 23:09:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501170201_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:13:26 2013] Warning, spatial fit 7 centroid is now closest to src. 24
[Tue May 14 00:13:26 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:13:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:13:26 2013] Assessing source extent using major
[Tue May 14 00:13:26 2013] Source does appear to be extended
[Tue May 14 00:13:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 01:51:19 2013] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Tue May 14 01:51:19 2013] Initial guess for spatial extent in simple fitting = 8.61"
[Tue May 14 01:51:19 2013] source mask rpix=2.0, npix_max = 24, mask sum = 21, frac = 0.855
[Tue May 14 01:51:19 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 8.61"
[Tue May 14 03:07:30 2013] fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_src7.ximg exists
[Tue May 14 03:07:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_src7.csv
[Tue May 14 03:07:30 2013] fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue May 14 03:07:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_src7.csv
[Tue May 14 03:07:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 03:07:30 2013] fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue May 14 03:07:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue May 14 03:07:30 2013] fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue May 14 03:07:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue May 14 03:07:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501170201_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:16:06 2013] Warning, spatial fit 7 centroid is now closest to src. 24
[Tue May 14 04:16:06 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:16:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:16:06 2013] Assessing source extent using major
[Tue May 14 04:16:06 2013] Source does appear to be extended
[Tue May 14 04:16:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 05:42:46 2013] XMMSAS src. selection expression = ellipse(26255.685028, 31129.373627, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 05:42:46 2013] Writing source region out to fullrun_mos1_xmm0501170201_pi300-10000_pass1_cl_src23_src.reg
[Tue May 14 05:42:46 2013] Extracting stamp from image fullrun_mos1_xmm0501170201_pi300-10000_cl_sm2.00.img.gz, (265, 321) - (340, 396)
[Tue May 14 05:42:46 2013] XMMSAS bgd. selection expression = annulus(26255.685028, 31129.373627, 1087.500000, 2175.000000, X, Y) && !ellipse(25354.636000, 30147.660000, 1307.136038, 1307.136038, 0.000000, X, Y)
[Tue May 14 05:42:46 2013] Writing fullrun_mos1_xmm0501170201_pi300-10000_pass1_cl_src23.gif
[Tue May 14 05:45:03 2013] Mean detx,y = (3364.27, 680.59) 
[Tue May 14 05:45:05 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 05:45:16 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 05:45:16 2013] Setting source spectrum file to fullrun_mos1_xmm0501170201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Tue May 14 05:45:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0501170201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Tue May 14 06:08:30 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 14 06:08:30 2013] rmf not generated due to insufficient counts
[Tue May 14 06:50:52 2013] Updating aperture counts using extracted products
[Tue May 14 06:50:52 2013] Total counts from fullrun_mos1_xmm0501170201_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 215.00
[Tue May 14 06:50:52 2013] Total counts from fullrun_mos1_xmm0501170201_pi300-10000_pass1_cl_src23_bgd.pi.gz = 530.00
[Tue May 14 06:50:52 2013] Got source and background scale factors 1178552.000000, 7227384.000000
[Tue May 14 06:50:52 2013] User source parameters:
  Position = (302.3, 358.4) = 9 58 27.06 2 16 17.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 128.6 +/- 15.7
  Background aperture counts = 86.4
  Rate = 0.004 +/- 0.0005

[Tue May 14 06:50:52 2013] Updating counts from extracted products
[Tue May 14 06:50:52 2013] Set source signif. to 128.57/9.30 = 13.83
[Tue May 14 06:51:02 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 06:51:02 2013] Using photon index=1.80, rate=0.0037, arf fullrun_mos1_xmm0501170201_pi300-10000_pass1_cl_src23.arf
[Tue May 14 06:51:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 06:51:02 2013] Updating source flux to 4.1e-14
[Tue May 14 06:51:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 06:51:25 2013] xmm0501170201/analysis//spectral/fullrun_mos1_xmm0501170201_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete