[Wed Jun 27 07:59:16 2012] Detection parameters:
  Position = (322.2, 426.7) = 9 59 17.24 1 50 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.9 +/- 15.0
  Background counts = 33.1
  Rate = 0.006 +/- 0.0009

[Wed Jun 27 07:59:17 2012] Off-axis axis estimate = 9.45'
[Wed Jun 27 08:01:29 2012] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 08:01:29 2012] Initial guess for spatial extent in simple fitting = 11.16"
[Wed Jun 27 08:01:29 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.958
[Wed Jun 27 08:01:29 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.16"
[Wed Jun 27 09:00:37 2012] fullrun_pn_xmm0501170101_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jun 27 09:00:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501170101_pi300-10000_cl_pass0_src11.csv
[Wed Jun 27 09:00:37 2012] fullrun_pn_xmm0501170101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jun 27 09:00:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501170101_pi300-10000_cl_pass0_src11.csv
[Wed Jun 27 09:00:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501170101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501170101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:00:38 2012] fullrun_pn_xmm0501170101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jun 27 09:00:38 2012] fullrun_pn_xmm0501170101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jun 27 09:00:38 2012] Fit fullrun_pn_xmm0501170101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Jun 27 09:27:55 2012] Source 11 is offset by -3.933576 and -7.387813 pixels which is larger than
2 X fitted extent = 1.282308 x 1.282308, not incorporating fit results
[Wed Jun 27 09:27:55 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:27:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:27:55 2012] Assessing source extent using major
[Wed Jun 27 09:27:55 2012] Source does appear to be extended
[Wed Jun 27 09:27:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:28:07 2012] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 09:28:07 2012] Initial guess for spatial extent in simple fitting = 11.16"
[Wed Jun 27 09:28:07 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.958
[Wed Jun 27 09:28:07 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 11.16"
[Wed Jun 27 10:44:36 2012] fullrun_pn_xmm0501170101_pi300-10000_cl_pass1_src11.ximg exists
[Wed Jun 27 10:44:36 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0501170101_pi300-10000_cl_pass1_src11.csv
[Wed Jun 27 10:44:36 2012] fullrun_pn_xmm0501170101_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Jun 27 10:44:36 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0501170101_pi300-10000_cl_pass1_src11.csv
[Wed Jun 27 10:44:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501170101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501170101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 10:44:37 2012] fullrun_pn_xmm0501170101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Jun 27 10:44:37 2012] fullrun_pn_xmm0501170101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Jun 27 10:44:37 2012] Fit fullrun_pn_xmm0501170101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Jun 27 11:17:49 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 14.146957 pixels away
[Wed Jun 27 11:17:49 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 11:17:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 11:17:49 2012] Assessing source extent using major
[Wed Jun 27 11:17:49 2012] Source does appear to be extended
[Wed Jun 27 11:17:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 11:18:09 2012] XMMSAS src. selection expression = ellipse(27981.262909, 37071.836304, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 27 11:18:09 2012] Writing source region out to fullrun_pn_xmm0501170101_pi300-10000_pass1_cl_src11_src.reg
[Wed Jun 27 11:18:09 2012] Extracting stamp from image fullrun_pn_xmm0501170101_pi300-10000_cl_sm2.00.img.gz, (285, 389) - (360, 464)
[Wed Jun 27 11:18:09 2012] XMMSAS bgd. selection expression = annulus(27981.262909, 37071.836304, 1087.500000, 2175.000000, X, Y) && !ellipse(30558.874000, 39800.212400, 1650.208047, 1650.208047, 0.000000, X, Y) && !ellipse(29724.290000, 39388.018000, 3286.008095, 3286.008095, 0.000000, X, Y) && !ellipse(28049.024567, 35156.222046, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 27 11:18:09 2012] Writing fullrun_pn_xmm0501170101_pi300-10000_pass1_cl_src11.gif
[Wed Jun 27 11:29:20 2012] Mean detx,y = (4302.81, -8504.44) 
[Wed Jun 27 11:29:23 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 11:29:39 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 11:29:39 2012] Setting source spectrum file to fullrun_pn_xmm0501170101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Jun 27 11:29:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0501170101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Jun 27 12:01:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 27 12:01:11 2012] rmf not generated due to insufficient counts
[Wed Jun 27 12:26:53 2012] Updating aperture counts using extracted products
[Wed Jun 27 12:26:53 2012] Error reading totcts from fullrun_pn_xmm0501170101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Jun 27 12:26:55 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 12:26:55 2012] Using photon index=1.80, rate=0.00616, arf fullrun_pn_xmm0501170101_pi300-10000_pass1_cl_src11.arf
[Wed Jun 27 12:26:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 12:26:56 2012] Updating source flux to 2.5e-14
[Wed Jun 27 12:27:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting