[Wed Jun 27 07:59:54 2012] Detection parameters:
  Position = (385.5, 254.0) = 9 58 58.87 1 37 45.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.8 +/- 14.0
  Background counts = 10.1
  Rate = 0.005 +/- 0.0006

[Wed Jun 27 07:59:54 2012] Off-axis axis estimate = 7.09'
[Wed Jun 27 09:12:56 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 09:12:56 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Wed Jun 27 09:12:56 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.962
[Wed Jun 27 09:12:56 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.97"
[Wed Jun 27 09:27:47 2012] fullrun_mos2_xmm0501170101_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jun 27 09:27:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501170101_pi300-10000_cl_pass0_src2.csv
[Wed Jun 27 09:27:47 2012] fullrun_mos2_xmm0501170101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jun 27 09:27:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501170101_pi300-10000_cl_pass0_src2.csv
[Wed Jun 27 09:27:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501170101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501170101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:27:47 2012] fullrun_mos2_xmm0501170101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jun 27 09:27:47 2012] fullrun_mos2_xmm0501170101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jun 27 09:27:47 2012] Fit fullrun_mos2_xmm0501170101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Jun 27 09:27:59 2012] Spatial fit model total counts = 277.824000, observed total counts = 274.000000
[Wed Jun 27 09:27:59 2012] Offset between fit and detection position for source 9 = 1.411508 pixels
[Wed Jun 27 09:27:59 2012] 275.469000 total counts/ 126.432000 bgd. counts: snr = 13.254569
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.411508 pixels
  Position = (385.6, 255.4) = 9 58 58.83 1 37 52.7
  Extent = 9.6 (8.4-11.7)", rotation angle = 0
  Source counts = 149.0 +/- 16.6
  Background counts = 126.4
  Rate = 0.004 +/- 0.0005
[Wed Jun 27 09:27:59 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:27:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:27:59 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 09:27:59 2012] Source does appear to be extended
[Wed Jun 27 09:27:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 11:02:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 11:02:11 2012] Initial guess for spatial extent in simple fitting = 9.65"
[Wed Jun 27 11:02:11 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.846
[Wed Jun 27 11:02:11 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.65"
[Wed Jun 27 11:17:38 2012] fullrun_mos2_xmm0501170101_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jun 27 11:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501170101_pi300-10000_cl_pass1_src2.csv
[Wed Jun 27 11:17:38 2012] fullrun_mos2_xmm0501170101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jun 27 11:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501170101_pi300-10000_cl_pass1_src2.csv
[Wed Jun 27 11:17:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501170101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501170101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 11:17:38 2012] fullrun_mos2_xmm0501170101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jun 27 11:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501170101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jun 27 11:17:38 2012] fullrun_mos2_xmm0501170101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jun 27 11:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501170101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jun 27 11:17:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501170101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501170101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 11:17:55 2012] Warning, spatial fit 2 centroid is now closest to src. 1
[Wed Jun 27 11:17:55 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 11:17:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 11:17:55 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 11:17:55 2012] Source does appear to be extended
[Wed Jun 27 11:17:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 12:14:22 2012] XMMSAS src. selection expression = ellipse(33502.074200, 22170.144000, 578.998817, 578.998817, 0.000000, X, Y)
[Wed Jun 27 12:14:22 2012] Writing source region out to fullrun_mos2_xmm0501170101_pi300-10000_pass1_cl_src9_src.reg
[Wed Jun 27 12:14:22 2012] Extracting stamp from image fullrun_mos2_xmm0501170101_pi300-10000_cl_sm2.00.img.gz, (352, 222) - (419, 289)
[Wed Jun 27 12:14:22 2012] XMMSAS bgd. selection expression = annulus(33502.074200, 22170.144000, 964.998028, 1929.996056, X, Y)
[Wed Jun 27 12:14:22 2012] Writing fullrun_mos2_xmm0501170101_pi300-10000_pass1_cl_src9.gif
[Wed Jun 27 12:14:44 2012] Mean detx,y = (-4924.90, -7455.07) 
[Wed Jun 27 12:14:45 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 12:15:02 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 12:15:03 2012] Setting source spectrum file to fullrun_mos2_xmm0501170101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Jun 27 12:15:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501170101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed Jun 27 12:26:59 2012] Updating aperture counts using extracted products
[Wed Jun 27 12:26:59 2012] Error reading totcts from fullrun_mos2_xmm0501170101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Jun 27 12:26:59 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 12:26:59 2012] Using photon index=1.80, rate=0.00443, arf fullrun_mos2_xmm0501170101_pi300-10000_pass1_cl_src9.arf
[Wed Jun 27 12:26:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 12:26:59 2012] Updating source flux to 6.7e-14
[Wed Jun 27 12:27:17 2012] Reading fit data from xmm0501170101/analysis//spectral/fullrun_mos2_xmm0501170101_pi300-10000_pass1_cl_src9_pl.csv
[Wed Jun 27 12:27:17 2012] Spectral fit parameter nH value = 4.03216e+21
[Wed Jun 27 12:27:17 2012] Spectral fit parameter PhoIndex value = 4.61681
[Wed Jun 27 12:27:17 2012] Failed to get F(0.3-8.0) from xmm0501170101/analysis//spectral/fullrun_mos2_xmm0501170101_pi300-10000_pass1_cl_src9_pl.csv, possibly due to different flux energy range selected
[Wed Jun 27 12:27:17 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 12:27:17 2012] Using Nh = 4e+21, photon index=4.62, rate=0.00443, arf fullrun_mos2_xmm0501170101_pi300-10000_pass1_cl_src9.arf
[Wed Jun 27 12:27:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 12:27:17 2012] Updating source flux to 4.2e-14