[Mon Jul  2 10:12:09 2012] Detection parameters:
  Position = (158.3, 257.3) = 2 17 32.60 -47 52 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.8 +/- 11.9
  Background counts = 28.9
  Rate = 0.001 +/- 0.0003

[Mon Jul  2 10:12:09 2012] Off-axis axis estimate = 10.58'
[Mon Jul  2 13:07:48 2012] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 13:07:48 2012] Initial guess for spatial extent in simple fitting = 11.72"
[Mon Jul  2 13:07:48 2012] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.200
[Mon Jul  2 13:07:48 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 11.72"
[Mon Jul  2 14:45:55 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src43.ximg exists
[Mon Jul  2 14:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src43.csv
[Mon Jul  2 14:45:55 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src43_1.ximg exists
[Mon Jul  2 14:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src43.csv
[Mon Jul  2 14:45:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 14:45:55 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Mon Jul  2 14:45:55 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Mon Jul  2 14:45:55 2012] Fit fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Mon Jul  2 14:46:16 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 11.843632 pixels away
[Mon Jul  2 14:46:16 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 14:46:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 14:46:16 2012] Assessing source extent using major
[Mon Jul  2 14:46:16 2012] Source does appear to be extended
[Mon Jul  2 14:46:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 17:14:11 2012] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 17:14:11 2012] Initial guess for spatial extent in simple fitting = 11.72"
[Mon Jul  2 17:14:11 2012] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.200
[Mon Jul  2 17:14:11 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 11.72"
[Mon Jul  2 18:20:11 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src37.ximg exists
[Mon Jul  2 18:20:11 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src37_1.ximg exists
[Mon Jul  2 18:20:11 2012] Fit fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src37 appears to have run properly
[Mon Jul  2 18:20:12 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Mon Jul  2 18:20:12 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Jul  2 18:20:12 2012] Fit fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Mon Jul  2 18:20:32 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 11.237727 pixels away
[Mon Jul  2 18:20:32 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 18:20:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 18:20:32 2012] Assessing source extent using major
[Mon Jul  2 18:20:32 2012] Source does appear to be extended
[Mon Jul  2 18:20:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 21:02:55 2012] XMMSAS src. selection expression = ellipse(13727.242966, 22340.626617, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul  2 21:02:55 2012] Writing source region out to fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src50_src.reg
[Mon Jul  2 21:02:55 2012] Extracting stamp from image fullrun_mos2_xmm0501110201_pi300-10000_cl_sm2.00.img.gz, (121, 220) - (196, 295)
[Mon Jul  2 21:02:55 2012] XMMSAS bgd. selection expression = annulus(13727.242966, 22340.626617, 1087.500000, 2175.000000, X, Y) && !ellipse(13346.280777, 20294.614578, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  2 21:02:55 2012] Writing fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src50.gif
[Mon Jul  2 21:09:04 2012] Mean detx,y = (-1936.46, 10650.88) 
[Mon Jul  2 21:09:05 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  2 21:09:12 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  2 21:09:12 2012] Setting source spectrum file to fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Mon Jul  2 21:09:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Mon Jul  2 21:44:18 2012] Not generating rmf since there are only 59 counts
[Mon Jul  2 21:44:18 2012] rmf not generated due to insufficient counts
[Mon Jul  2 22:16:08 2012] Updating aperture counts using extracted products
[Mon Jul  2 22:16:08 2012] Error reading totcts from fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Mon Jul  2 22:16:08 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  2 22:16:08 2012] Using photon index=1.80, rate=0.00128, arf fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src50.arf
[Mon Jul  2 22:16:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  2 22:16:08 2012] Updating source flux to 2.5e-14
[Mon Jul  2 22:17:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting