[Mon Jul 2 10:12:09 2012] Detection parameters: Position = (276.9, 285.9) = 2 16 41.32 -47 50 22.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 49.3 +/- 13.0 Background counts = 44.8 Rate = 0.001 +/- 0.0003 [Mon Jul 2 10:12:09 2012] Off-axis axis estimate = 1.81' [Mon Jul 2 13:07:48 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting [Mon Jul 2 13:07:48 2012] Initial guess for spatial extent in simple fitting = 7.33" [Mon Jul 2 13:07:48 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838 [Mon Jul 2 13:07:48 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 7.33" [Mon Jul 2 14:45:55 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src48.ximg exists [Mon Jul 2 14:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src48.csv [Mon Jul 2 14:45:55 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src48_1.ximg exists [Mon Jul 2 14:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src48.csv [Mon Jul 2 14:45:55 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src48_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jul 2 14:45:55 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src48.ximg exists [Mon Jul 2 14:45:55 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists [Mon Jul 2 14:45:55 2012] Fit fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly [Mon Jul 2 14:46:16 2012] Warning, spatial fit 48 centroid is now closest to src. 45 [Mon Jul 2 14:46:16 2012] Vigneting correction estimate = 1.000000 [Mon Jul 2 14:46:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jul 2 14:46:16 2012] Assessing source extent using major [Mon Jul 2 14:46:16 2012] Source does appear to be extended [Mon Jul 2 14:46:16 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jul 2 14:46:16 2012] Source is confused with source 45 [Mon Jul 2 17:14:11 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting [Mon Jul 2 17:14:11 2012] Initial guess for spatial extent in simple fitting = 7.33" [Mon Jul 2 17:14:11 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838 [Mon Jul 2 17:14:11 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 7.33" [Mon Jul 2 18:20:11 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src40.ximg exists [Mon Jul 2 18:20:11 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src40_1.ximg exists [Mon Jul 2 18:20:11 2012] Fit fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src40 appears to have run properly [Mon Jul 2 18:20:12 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src40.ximg exists [Mon Jul 2 18:20:12 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists [Mon Jul 2 18:20:12 2012] Fit fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly [Mon Jul 2 18:20:32 2012] Spatial fit model total counts = 2140.200000, observed total counts = 2065.000000 [Mon Jul 2 18:20:32 2012] Offset between fit and detection position for source 48 = 4.236773 pixels [Mon Jul 2 18:20:32 2012] Warning, changing simple spatial fit ID from 40 to 23 [Mon Jul 2 18:20:32 2012] 2167.903000 total counts/ 1537.530000 bgd. counts: snr = 16.076289 Spatial fit parameters: Offset between fit and detection position for source 48 = 4.236773 pixels Position = (279.1, 282.2) = 2 16 40.39 -47 50 37.4 Extent = 29.3 (29.3-58.6)", rotation angle = 0 Source counts = 630.4 +/- 46.6 Background counts = 1537.5 Rate = 0.01 +/- 0.001 [Mon Jul 2 18:20:32 2012] Spatial fit model total counts = 787.216000, observed total counts = 777.000000 [Mon Jul 2 18:20:32 2012] Offset between fit and detection position for source 48 = 4.042113 pixels [Mon Jul 2 18:20:32 2012] Warning, changing simple spatial fit ID from 23 to 40 [Mon Jul 2 18:20:32 2012] 735.842100 total counts/ 687.813000 bgd. counts: snr = 1.831341 Spatial fit parameters: Offset between fit and detection position for source 48 = 4.042113 pixels Position = (281.8, 279.3) = 2 16 39.20 -47 50 50.3 Extent = 9.5 (3.6-14.7)", rotation angle = 0 Source counts = 48.0 +/- 27.1 Background counts = 687.8 Rate = 0.001 +/- 0.0006 [Mon Jul 2 18:20:32 2012] Vigneting correction estimate = 1.000000 [Mon Jul 2 18:20:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jul 2 18:20:32 2012] Assessing source extent using major axis lower bound [Mon Jul 2 18:20:32 2012] Source does appear to be extended [Mon Jul 2 18:20:32 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jul 2 21:02:55 2012] XMMSAS src. selection expression = ellipse(24471.278000, 24247.000000, 570.564616, 570.564616, 0.000000, X, Y) [Mon Jul 2 21:02:55 2012] Writing source region out to fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src48_src.reg [Mon Jul 2 21:02:55 2012] Extracting stamp from image fullrun_mos2_xmm0501110201_pi300-10000_cl_sm2.00.img.gz, (249, 246) - (315, 312) [Mon Jul 2 21:02:55 2012] XMMSAS bgd. selection expression = annulus(24471.278000, 24247.000000, 950.941027, 1901.882055, X, Y) && !ellipse(23322.490000, 26185.778000, 335.842410, 335.842410, 0.000000, X, Y) && !ellipse(25368.786060, 25701.136200, 389.870411, 389.870411, 0.000000, X, Y) && !ellipse(23136.850000, 26691.160000, 739.773621, 739.773621, 0.000000, X, Y) && !ellipse(23270.870000, 26033.336000, 808.584023, 808.584023, 0.000000, X, Y) && !ellipse(22565.446533, 26473.139893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22233.145721, 26177.252808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22529.213000, 25428.852000, 1263.648036, 1263.648036, 0.000000, X, Y) && !ellipse(24304.493378, 26393.393433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23664.354000, 25357.432000, 1173.000034, 1173.000034, 0.000000, X, Y) && !ellipse(21779.767609, 25974.005005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24701.821167, 26063.936157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24480.750153, 25281.214935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21806.282000, 24503.078000, 2527.296073, 2527.296073, 0.000000, X, Y) [Mon Jul 2 21:02:55 2012] Writing fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src48.gif [Mon Jul 2 21:10:36 2012] Mean detx,y = (1884.72, 473.01) [Mon Jul 2 21:10:36 2012] Setting backscal keywords in source and bgd. spectrum [Mon Jul 2 21:10:42 2012] Binned source spectrum to 10 counts/bin [Mon Jul 2 21:10:42 2012] Setting source spectrum file to fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src48_src_b10.pi.gz [Mon Jul 2 21:10:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src48_bgd.pi.gz [Mon Jul 2 22:15:19 2012] Not generating rmf since there are only 48 counts [Mon Jul 2 22:15:19 2012] rmf not generated due to insufficient counts [Mon Jul 2 22:16:08 2012] Updating aperture counts using extracted products [Mon Jul 2 22:16:08 2012] Error reading totcts from fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src48_src_b10.pi.gz [Mon Jul 2 22:16:08 2012] Calculating source flux in energy range 0.30-8.00 [Mon Jul 2 22:16:08 2012] Using photon index=1.80, rate=0.00103, arf fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src48.arf [Mon Jul 2 22:16:08 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jul 2 22:16:09 2012] Updating source flux to 1.3e-14 [Mon Jul 2 22:17:06 2012] Flag c found in src. 48 procflags, skipping spectral fitting [Mon Jul 2 22:17:06 2012] Source 48 has fewer than 100.000000 counts, skipping spectral fitting