[Mon Jul  2 10:12:08 2012] Detection parameters:
  Position = (256.1, 301.4) = 2 16 50.31 -47 49 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.0 +/- 17.5
  Background counts = 44.4
  Rate = 0.003 +/- 0.0004

[Mon Jul  2 10:12:09 2012] Off-axis axis estimate = 3.08'
[Mon Jul  2 13:07:48 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 13:07:48 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Mon Jul  2 13:07:48 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.874
[Mon Jul  2 13:07:48 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.97"
[Mon Jul  2 14:45:54 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src18.ximg exists
[Mon Jul  2 14:45:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src18.csv
[Mon Jul  2 14:45:54 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon Jul  2 14:45:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src18.csv
[Mon Jul  2 14:45:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 14:45:55 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon Jul  2 14:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jul  2 14:45:55 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Jul  2 14:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jul  2 14:45:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 14:46:16 2012] Spatial fit model total counts = 1267.420000, observed total counts = 1123.000000
[Mon Jul  2 14:46:16 2012] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul  2 14:46:16 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 14:46:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 14:46:16 2012] Assessing source extent using major
[Mon Jul  2 14:46:16 2012] Source does appear to be extended
[Mon Jul  2 14:46:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 14:46:16 2012] Source is confused with source 14
[Mon Jul  2 17:14:11 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 17:14:11 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Mon Jul  2 17:14:11 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.874
[Mon Jul  2 17:14:11 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 7.97"
[Mon Jul  2 18:20:10 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src18.ximg exists
[Mon Jul  2 18:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src18.csv
[Mon Jul  2 18:20:10 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon Jul  2 18:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src18.csv
[Mon Jul  2 18:20:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 18:20:11 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon Jul  2 18:20:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Jul  2 18:20:11 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Jul  2 18:20:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Jul  2 18:20:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 18:20:32 2012] Spatial fit model total counts = 1274.450000, observed total counts = 1123.000000
[Mon Jul  2 18:20:32 2012] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul  2 18:20:32 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 18:20:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 18:20:32 2012] Assessing source extent using major
[Mon Jul  2 18:20:32 2012] Source does appear to be extended
[Mon Jul  2 18:20:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 21:02:54 2012] XMMSAS src. selection expression = ellipse(22233.145721, 26177.252808, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul  2 21:02:54 2012] Writing source region out to fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src39_src.reg
[Mon Jul  2 21:02:54 2012] Extracting stamp from image fullrun_mos2_xmm0501110201_pi300-10000_cl_sm2.00.img.gz, (219, 264) - (294, 339)
[Mon Jul  2 21:02:54 2012] XMMSAS bgd. selection expression = annulus(22233.145721, 26177.252808, 1087.500000, 2175.000000, X, Y) && !ellipse(23322.490000, 26185.778000, 335.842410, 335.842410, 0.000000, X, Y) && !ellipse(23136.850000, 26691.160000, 739.773621, 739.773621, 0.000000, X, Y) && !ellipse(23270.870000, 26033.336000, 808.584023, 808.584023, 0.000000, X, Y) && !ellipse(22565.446533, 26473.139893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22529.213000, 25428.852000, 1263.648036, 1263.648036, 0.000000, X, Y) && !ellipse(24304.493378, 26393.393433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23664.354000, 25357.432000, 1173.000034, 1173.000034, 0.000000, X, Y) && !ellipse(21779.767609, 25974.005005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21259.295578, 26135.945862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24701.821167, 26063.936157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24480.750153, 25281.214935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22984.611938, 27432.919708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22261.793488, 27091.692688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21023.551544, 25782.888031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21806.282000, 24503.078000, 2527.296073, 2527.296073, 0.000000, X, Y) && !ellipse(23566.278412, 27779.634674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24471.278000, 24247.000000, 760.752822, 760.752822, 0.000000, X, Y)
[Mon Jul  2 21:02:54 2012] Writing fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src39.gif
[Mon Jul  2 21:06:04 2012] Mean detx,y = (-925.46, 1389.62) 
[Mon Jul  2 21:06:05 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  2 21:06:11 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  2 21:06:11 2012] Setting source spectrum file to fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Mon Jul  2 21:06:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Mon Jul  2 21:34:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul  2 21:34:14 2012] rmf not generated due to insufficient counts
[Mon Jul  2 22:16:08 2012] Updating aperture counts using extracted products
[Mon Jul  2 22:16:08 2012] Error reading totcts from fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Mon Jul  2 22:16:08 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  2 22:16:08 2012] Using photon index=1.80, rate=0.003, arf fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src39.arf
[Mon Jul  2 22:16:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  2 22:16:08 2012] Updating source flux to 3e-14
[Mon Jul  2 22:17:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting