[Mon Jul  2 10:12:08 2012] Detection parameters:
  Position = (397.5, 291.0) = 2 15 49.23 -47 49 58.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 169.4 +/- 16.8
  Background counts = 17.9
  Rate = 0.007 +/- 0.0006

[Mon Jul  2 10:12:09 2012] Off-axis axis estimate = 7.20'
[Mon Jul  2 13:07:48 2012] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 13:07:48 2012] Initial guess for spatial extent in simple fitting = 10.03"
[Mon Jul  2 13:07:48 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.953
[Mon Jul  2 13:07:48 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.03"
[Mon Jul  2 14:45:54 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jul  2 14:45:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src7.csv
[Mon Jul  2 14:45:54 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jul  2 14:45:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src7.csv
[Mon Jul  2 14:45:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 14:45:55 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jul  2 14:45:55 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jul  2 14:45:55 2012] Fit fullrun_mos2_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Jul  2 14:46:16 2012] Spatial fit model total counts = 374.169000, observed total counts = 373.000000
[Mon Jul  2 14:46:16 2012] Offset between fit and detection position for source 18 = 0.137778 pixels
[Mon Jul  2 14:46:16 2012] 365.344000 total counts/ 264.379000 bgd. counts: snr = 6.209511
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.137778 pixels
  Position = (397.4, 291.0) = 2 15 49.29 -47 49 58.9
  Extent = 4.2 (3.6-5.2)", rotation angle = 0
  Source counts = 101.0 +/- 19.1
  Background counts = 264.4
  Rate = 0.002 +/- 0.0004
[Mon Jul  2 14:46:16 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 14:46:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 14:46:16 2012] Assessing source extent using major axis lower bound
[Mon Jul  2 14:46:16 2012] Source does appear to be extended
[Mon Jul  2 14:46:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 17:14:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul  2 17:14:11 2012] Initial guess for spatial extent in simple fitting = 4.24"
[Mon Jul  2 17:14:11 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.035
[Mon Jul  2 17:14:11 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.24"
[Mon Jul  2 18:20:10 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jul  2 18:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src7.csv
[Mon Jul  2 18:20:10 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jul  2 18:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src7.csv
[Mon Jul  2 18:20:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 18:20:11 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jul  2 18:20:11 2012] fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jul  2 18:20:11 2012] Fit fullrun_mos2_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Jul  2 18:20:32 2012] Spatial fit model total counts = 373.513000, observed total counts = 373.000000
[Mon Jul  2 18:20:32 2012] Offset between fit and detection position for source 18 = 0.022949 pixels
[Mon Jul  2 18:20:32 2012] 378.632000 total counts/ 275.896000 bgd. counts: snr = 6.185146
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.022949 pixels
  Position = (397.4, 290.9) = 2 15 49.29 -47 49 59.0
  Extent = 4.3 (3.7-5.3)", rotation angle = 0
  Source counts = 102.7 +/- 19.5
  Background counts = 275.9
  Rate = 0.002 +/- 0.0004
[Mon Jul  2 18:20:32 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 18:20:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 18:20:32 2012] Assessing source extent using major axis lower bound
[Mon Jul  2 18:20:32 2012] Source does appear to be extended
[Mon Jul  2 18:20:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 21:02:54 2012] XMMSAS src. selection expression = ellipse(34522.255400, 25262.975600, 260.406007, 260.406007, 0.000000, X, Y)
[Mon Jul  2 21:02:54 2012] Writing source region out to fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src18_src.reg
[Mon Jul  2 21:02:54 2012] Extracting stamp from image fullrun_mos2_xmm0501110201_pi300-10000_cl_sm2.00.img.gz, (382, 276) - (412, 306)
[Mon Jul  2 21:02:54 2012] XMMSAS bgd. selection expression = annulus(34522.255400, 25262.975600, 434.010012, 868.020025, X, Y)
[Mon Jul  2 21:02:54 2012] Writing fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src18.gif
[Mon Jul  2 21:04:07 2012] Mean detx,y = (6143.93, -8697.15) 
[Mon Jul  2 21:04:08 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  2 21:04:12 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  2 21:04:12 2012] Setting source spectrum file to fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Jul  2 21:04:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon Jul  2 22:16:08 2012] Updating aperture counts using extracted products
[Mon Jul  2 22:16:08 2012] Error reading totcts from fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Jul  2 22:16:08 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  2 22:16:08 2012] Using photon index=1.80, rate=0.0022, arf fullrun_mos2_xmm0501110201_pi300-10000_pass1_cl_src18.arf
[Mon Jul  2 22:16:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  2 22:16:08 2012] Updating source flux to 6.1e-14