[Mon Jul  2 10:11:48 2012] Detection parameters:
  Position = (158.7, 257.3) = 2 17 32.45 -47 52 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.9 +/- 11.3
  Background counts = 21.0
  Rate = 0.002 +/- 0.0005

[Mon Jul  2 10:11:48 2012] Off-axis axis estimate = 10.56'
[Mon Jul  2 11:44:14 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 11:44:14 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Mon Jul  2 11:44:14 2012] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.202
[Mon Jul  2 11:44:14 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 11.71"
[Mon Jul  2 13:07:48 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src22.ximg exists
[Mon Jul  2 13:07:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src22.csv
[Mon Jul  2 13:07:48 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src22_1.ximg exists
[Mon Jul  2 13:07:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src22.csv
[Mon Jul  2 13:07:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 13:07:48 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Mon Jul  2 13:07:48 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Mon Jul  2 13:07:48 2012] Fit fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Mon Jul  2 14:46:10 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 13.104727 pixels away
[Mon Jul  2 14:46:10 2012] Spatial fit model total counts = 250.782000, observed total counts = 252.000000
[Mon Jul  2 14:46:10 2012] Offset between fit and detection position for source 45 = 0.028993 pixels
[Mon Jul  2 14:46:10 2012] 250.541200 total counts/ 209.985000 bgd. counts: snr = 2.798744
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.028993 pixels
  Position = (158.7, 257.4) = 2 17 32.44 -47 52 24.6
  Extent = 5.5 (3.9-8.0)", rotation angle = 0
  Source counts = 40.6 +/- 15.8
  Background counts = 210.0
  Rate = 0.0009 +/- 0.0003
[Mon Jul  2 14:46:10 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 14:46:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 14:46:10 2012] Assessing source extent using major axis lower bound
[Mon Jul  2 14:46:10 2012] Source does appear to be extended
[Mon Jul  2 14:46:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 14:46:10 2012] Deleting source due to low Poisson probability 0.9