[Mon Jul  2 10:11:47 2012] Detection parameters:
  Position = (158.4, 328.7) = 2 17 32.45 -47 47 14.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 461.3 +/- 26.5
  Background counts = 19.7
  Rate = 0.02 +/- 0.001

[Mon Jul  2 10:11:48 2012] Off-axis axis estimate = 10.38'
[Mon Jul  2 11:44:14 2012] Using EEF radius (= 11.62 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 11:44:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  2 11:44:14 2012] Initial guess for spatial extent in simple fitting = 11.62"
[Mon Jul  2 11:44:14 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.044
[Mon Jul  2 11:44:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.62"
[Mon Jul  2 13:07:47 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul  2 13:07:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src1.csv
[Mon Jul  2 13:07:47 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul  2 13:07:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src1.csv
[Mon Jul  2 13:07:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 13:07:48 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul  2 13:07:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul  2 13:07:48 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul  2 13:07:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul  2 13:07:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 14:46:10 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.034528 pixels away
[Mon Jul  2 14:46:10 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 14:46:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 14:46:10 2012] Assessing source extent using major
[Mon Jul  2 14:46:10 2012] Source does appear to be extended
[Mon Jul  2 14:46:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 16:00:35 2012] Using EEF radius (= 11.62 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 16:00:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  2 16:00:35 2012] Initial guess for spatial extent in simple fitting = 11.62"
[Mon Jul  2 16:00:35 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.044
[Mon Jul  2 16:00:35 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.62"
[Mon Jul  2 17:14:10 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul  2 17:14:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src1.csv
[Mon Jul  2 17:14:10 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul  2 17:14:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src1.csv
[Mon Jul  2 17:14:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 17:14:11 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul  2 17:14:11 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul  2 17:14:11 2012] Fit fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul  2 18:20:27 2012] Spatial fit model total counts = 836.899000, observed total counts = 780.000000
[Mon Jul  2 18:20:27 2012] Offset between fit and detection position for source 3 = 0.236584 pixels
[Mon Jul  2 18:20:27 2012] 837.791000 total counts/ 492.463000 bgd. counts: snr = 15.561268
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.236584 pixels
  Position = (158.5, 328.5) = 2 17 32.44 -47 47 15.1
  Extent = 5.9 (5.4-6.6)", rotation angle = 0
  Source counts = 345.3 +/- 28.9
  Background counts = 492.5
  Rate = 0.007 +/- 0.0006
[Mon Jul  2 18:20:27 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 18:20:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 18:20:27 2012] Assessing source extent using major axis lower bound
[Mon Jul  2 18:20:27 2012] Source does appear to be extended
[Mon Jul  2 18:20:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 19:49:15 2012] XMMSAS src. selection expression = ellipse(13739.806000, 28532.007600, 354.418210, 354.418210, 0.000000, X, Y)
[Mon Jul  2 19:49:15 2012] Writing source region out to fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src3_src.reg
[Mon Jul  2 19:49:15 2012] Extracting stamp from image fullrun_mos1_xmm0501110201_pi300-10000_cl_sm2.00.img.gz, (138, 308) - (179, 349)
[Mon Jul  2 19:49:15 2012] XMMSAS bgd. selection expression = annulus(13739.806000, 28532.007600, 590.697017, 1181.394034, X, Y)
[Mon Jul  2 19:49:15 2012] Writing fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src3.gif
[Mon Jul  2 19:49:18 2012] Mean detx,y = (7689.00, 7131.16) 
[Mon Jul  2 19:49:18 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  2 19:49:25 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  2 19:49:25 2012] Setting source spectrum file to fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jul  2 19:49:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jul  2 22:16:07 2012] Updating aperture counts using extracted products
[Mon Jul  2 22:16:07 2012] Error reading totcts from fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jul  2 22:16:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  2 22:16:07 2012] Using photon index=1.80, rate=0.00741, arf fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src3.arf
[Mon Jul  2 22:16:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  2 22:16:07 2012] Updating source flux to 1.3e-13
[Mon Jul  2 22:17:06 2012] Reading fit data from xmm0501110201/analysis//spectral/fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src3_pl.csv
[Mon Jul  2 22:17:06 2012] Spectral fit parameter nH value = 1.35112e+16
[Mon Jul  2 22:17:06 2012] Spectral fit parameter PhoIndex value = 1.66743
[Mon Jul  2 22:17:06 2012] Failed to get F(0.3-8.0) from xmm0501110201/analysis//spectral/fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Jul  2 22:17:06 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  2 22:17:06 2012] Using Nh = 1.4e+16, photon index=1.67, rate=0.00741, arf fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src3.arf
[Mon Jul  2 22:17:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  2 22:17:06 2012] Updating source flux to 1.4e-13