[Mon Jul  2 10:11:47 2012] Detection parameters:
  Position = (257.9, 303.1) = 2 16 49.54 -47 49 5.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 209.6 +/- 21.2
  Background counts = 39.6
  Rate = 0.005 +/- 0.0005

[Mon Jul  2 10:11:48 2012] Off-axis axis estimate = 2.96'
[Mon Jul  2 11:44:14 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 11:44:14 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Mon Jul  2 11:44:14 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.744
[Mon Jul  2 11:44:14 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.91"
[Mon Jul  2 13:07:47 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jul  2 13:07:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src7.csv
[Mon Jul  2 13:07:47 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jul  2 13:07:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src7.csv
[Mon Jul  2 13:07:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 13:07:48 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jul  2 13:07:48 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jul  2 13:07:48 2012] Fit fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Jul  2 14:46:10 2012] Spatial fit model total counts = 1413.720000, observed total counts = 1395.000000
[Mon Jul  2 14:46:10 2012] Offset between fit and detection position for source 13 = 2.615590 pixels
[Mon Jul  2 14:46:10 2012] 1379.608000 total counts/ 1214.060000 bgd. counts: snr = 4.751206
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 2.615590 pixels
  Position = (256.7, 305.4) = 2 16 50.06 -47 48 56.5
  Extent = 15.8 (15.8-31.6)", rotation angle = 0
  Source counts = 165.5 +/- 37.1
  Background counts = 1214.1
  Rate = 0.004 +/- 0.0008
[Mon Jul  2 14:46:10 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 14:46:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 14:46:10 2012] Assessing source extent using major axis lower bound
[Mon Jul  2 14:46:10 2012] Source does appear to be extended
[Mon Jul  2 14:46:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 14:46:10 2012] Source is confused with source 33
[Mon Jul  2 14:46:10 2012] Source is confused with source 30
[Mon Jul  2 16:00:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul  2 16:00:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  2 16:00:35 2012] Initial guess for spatial extent in simple fitting = 15.82"
[Mon Jul  2 16:00:35 2012] source mask rpix=3.6, npix_max = 68, mask sum = 68, frac = 0.994
[Mon Jul  2 16:00:35 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 15.82"
[Mon Jul  2 17:14:10 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jul  2 17:14:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src7.csv
[Mon Jul  2 17:14:10 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jul  2 17:14:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src7.csv
[Mon Jul  2 17:14:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 17:14:11 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jul  2 17:14:11 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jul  2 17:14:11 2012] Fit fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Jul  2 18:20:27 2012] Warning, spatial fit 7 centroid is now closest to src. 25
[Mon Jul  2 18:20:27 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 18:20:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 18:20:27 2012] Assessing source extent using major axis lower bound
[Mon Jul  2 18:20:27 2012] Source does appear to be extended
[Mon Jul  2 18:20:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 19:49:15 2012] XMMSAS src. selection expression = ellipse(22282.520400, 26521.609800, 948.978027, 948.978027, 0.000000, X, Y)
[Mon Jul  2 19:49:15 2012] Writing source region out to fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src13_src.reg
[Mon Jul  2 19:49:15 2012] Extracting stamp from image fullrun_mos1_xmm0501110201_pi300-10000_cl_sm2.00.img.gz, (202, 251) - (311, 360)
[Mon Jul  2 19:49:15 2012] XMMSAS bgd. selection expression = annulus(22282.520400, 26521.609800, 1581.630046, 3163.260091, X, Y) && !ellipse(23314.399600, 26257.909400, 386.546411, 386.546411, 0.000000, X, Y) && !ellipse(25377.736400, 25721.925200, 349.325610, 349.325610, 0.000000, X, Y) && !ellipse(23875.152000, 25467.990000, 1148.120033, 1148.120033, 0.000000, X, Y) && !ellipse(23033.932000, 26340.926000, 2530.608073, 2530.608073, 0.000000, X, Y) && !ellipse(24219.806000, 26482.058400, 1130.568033, 1130.568033, 0.000000, X, Y) && !ellipse(21979.674000, 24794.096000, 1275.200037, 1275.200037, 0.000000, X, Y) && !ellipse(21545.378967, 26312.130951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24195.188477, 25795.950775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23630.844000, 27110.844000, 1187.312034, 1187.312034, 0.000000, X, Y) && !ellipse(21553.188736, 25015.024353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25617.326000, 27079.840400, 1117.904032, 1117.904032, 0.000000, X, Y) && !ellipse(25240.412445, 26364.721771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25034.824400, 23539.944000, 523.110415, 523.110415, 0.000000, X, Y) && !ellipse(23417.519775, 24769.205811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24247.343872, 27614.603363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22257.845459, 27728.148346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20865.010000, 24603.156000, 1325.520038, 1325.520038, 0.000000, X, Y) && !ellipse(22681.341217, 27680.479950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24852.528595, 24597.738708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24089.324493, 24412.282257, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  2 19:49:15 2012] Writing fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src13.gif
[Mon Jul  2 19:50:26 2012] Mean detx,y = (1320.53, 904.19) 
[Mon Jul  2 19:50:27 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  2 19:50:34 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  2 19:50:34 2012] Setting source spectrum file to fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Jul  2 19:50:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Mon Jul  2 22:16:07 2012] Updating aperture counts using extracted products
[Mon Jul  2 22:16:07 2012] Error reading totcts from fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Jul  2 22:16:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  2 22:16:07 2012] Using photon index=1.80, rate=0.00355, arf fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src13.arf
[Mon Jul  2 22:16:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  2 22:16:07 2012] Updating source flux to 3.3e-14
[Mon Jul  2 22:16:10 2012] Flag c found in src. 13 procflags, skipping spectral fitting