[Mon Jul  2 10:11:47 2012] Detection parameters:
  Position = (268.7, 302.1) = 2 16 44.87 -47 49 9.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 675.1 +/- 33.4
  Background counts = 40.6
  Rate = 0.01 +/- 0.0007

[Mon Jul  2 10:11:48 2012] Off-axis axis estimate = 2.17'
[Mon Jul  2 11:44:14 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 11:44:14 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Mon Jul  2 11:44:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.008
[Mon Jul  2 11:44:14 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.51"
[Mon Jul  2 13:07:47 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jul  2 13:07:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src3.csv
[Mon Jul  2 13:07:47 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jul  2 13:07:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src3.csv
[Mon Jul  2 13:07:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 13:07:48 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jul  2 13:07:48 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jul  2 13:07:48 2012] Fit fullrun_mos1_xmm0501110201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jul  2 14:46:10 2012] Spatial fit model total counts = 2010.270000, observed total counts = 2006.000000
[Mon Jul  2 14:46:10 2012] Offset between fit and detection position for source 1 = 0.183148 pixels
[Mon Jul  2 14:46:10 2012] 2003.515000 total counts/ 1675.310000 bgd. counts: snr = 8.018583
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.183148 pixels
  Position = (268.6, 302.2) = 2 16 44.93 -47 49 10.4
  Extent = 6.2 (5.3-7.2)", rotation angle = 0
  Source counts = 328.2 +/- 44.8
  Background counts = 1675.3
  Rate = 0.007 +/- 0.001
[Mon Jul  2 14:46:10 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 14:46:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 14:46:10 2012] Assessing source extent using major axis lower bound
[Mon Jul  2 14:46:10 2012] Source does appear to be extended
[Mon Jul  2 14:46:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 14:46:10 2012] Source is confused with source 25
[Mon Jul  2 14:46:10 2012] Source is confused with source 33
[Mon Jul  2 16:00:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul  2 16:00:35 2012] Initial guess for spatial extent in simple fitting = 6.25"
[Mon Jul  2 16:00:35 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.067
[Mon Jul  2 16:00:35 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.25"
[Mon Jul  2 17:14:10 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jul  2 17:14:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src3.csv
[Mon Jul  2 17:14:10 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jul  2 17:14:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src3.csv
[Mon Jul  2 17:14:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 17:14:11 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jul  2 17:14:11 2012] fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jul  2 17:14:11 2012] Fit fullrun_mos1_xmm0501110201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jul  2 18:20:27 2012] Spatial fit model total counts = 2005.190000, observed total counts = 2006.000000
[Mon Jul  2 18:20:27 2012] Offset between fit and detection position for source 1 = 0.168026 pixels
[Mon Jul  2 18:20:27 2012] 1653.816000 total counts/ 1428.840000 bgd. counts: snr = 5.951746
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.168026 pixels
  Position = (268.5, 302.4) = 2 16 44.94 -47 49 9.7
  Extent = 4.8 (3.9-6.3)", rotation angle = 0
  Source counts = 225.0 +/- 40.7
  Background counts = 1428.8
  Rate = 0.005 +/- 0.0009
[Mon Jul  2 18:20:27 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 18:20:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 18:20:27 2012] Assessing source extent using major axis lower bound
[Mon Jul  2 18:20:27 2012] Source does appear to be extended
[Mon Jul  2 18:20:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 19:49:15 2012] XMMSAS src. selection expression = ellipse(23314.399600, 26257.909400, 289.909808, 289.909808, 0.000000, X, Y)
[Mon Jul  2 19:49:15 2012] Writing source region out to fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul  2 19:49:15 2012] Extracting stamp from image fullrun_mos1_xmm0501110201_pi300-10000_cl_sm2.00.img.gz, (252, 286) - (285, 319)
[Mon Jul  2 19:49:15 2012] XMMSAS bgd. selection expression = annulus(23314.399600, 26257.909400, 483.183014, 966.366028, X, Y) && !ellipse(22282.520400, 26521.609800, 1265.304036, 1265.304036, 0.000000, X, Y) && !ellipse(23875.152000, 25467.990000, 1148.120033, 1148.120033, 0.000000, X, Y) && !ellipse(23033.932000, 26340.926000, 2530.608073, 2530.608073, 0.000000, X, Y) && !ellipse(24219.806000, 26482.058400, 1130.568033, 1130.568033, 0.000000, X, Y) && !ellipse(21979.674000, 24794.096000, 1275.200037, 1275.200037, 0.000000, X, Y) && !ellipse(21545.378967, 26312.130951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24195.188477, 25795.950775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23630.844000, 27110.844000, 1187.312034, 1187.312034, 0.000000, X, Y) && !ellipse(21553.188736, 25015.024353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23417.519775, 24769.205811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24247.343872, 27614.603363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22257.845459, 27728.148346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22681.341217, 27680.479950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24852.528595, 24597.738708, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  2 19:49:15 2012] Writing fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src1.gif
[Mon Jul  2 19:49:40 2012] Mean detx,y = (652.59, 253.85) 
[Mon Jul  2 19:49:41 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  2 19:49:46 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  2 19:49:46 2012] Setting source spectrum file to fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  2 19:49:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul  2 22:16:07 2012] Updating aperture counts using extracted products
[Mon Jul  2 22:16:07 2012] Error reading totcts from fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  2 22:16:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  2 22:16:07 2012] Using photon index=1.80, rate=0.00483, arf fullrun_mos1_xmm0501110201_pi300-10000_pass1_cl_src1.arf
[Mon Jul  2 22:16:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  2 22:16:07 2012] Updating source flux to 5.7e-14
[Mon Jul  2 22:16:10 2012] Flag c found in src. 1 procflags, skipping spectral fitting