[Sat Jul 28 21:15:06 2012] Detection parameters:
  Position = (478.6, 335.6) = 23 14 58.82 -2 20 50.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.8 +/- 14.2
  Background counts = 43.9
  Rate = 0.002 +/- 0.0003

[Sat Jul 28 21:15:07 2012] Off-axis axis estimate = 13.34'
[Sun Jul 29 00:31:37 2012] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 00:31:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 29 00:31:37 2012] Initial guess for spatial extent in simple fitting = 13.10"
[Sun Jul 29 00:31:37 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.994
[Sun Jul 29 00:31:37 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 13.10"
[Sun Jul 29 01:02:38 2012] fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_src22.ximg exists
[Sun Jul 29 01:02:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_src22.csv
[Sun Jul 29 01:02:38 2012] fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_src22_1.ximg exists
[Sun Jul 29 01:02:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_src22.csv
[Sun Jul 29 01:02:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 01:02:39 2012] fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sun Jul 29 01:02:39 2012] fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sun Jul 29 01:02:39 2012] Fit fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Sun Jul 29 01:03:00 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 17.760861 pixels away
[Sun Jul 29 01:03:00 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 01:03:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 01:03:00 2012] Assessing source extent using major
[Sun Jul 29 01:03:00 2012] Source does appear to be extended
[Sun Jul 29 01:03:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 04:56:59 2012] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 04:56:59 2012] Initial guess for spatial extent in simple fitting = 13.10"
[Sun Jul 29 04:56:59 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.994
[Sun Jul 29 04:56:59 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 13.10"
[Sun Jul 29 05:26:24 2012] fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_src20.ximg exists
[Sun Jul 29 05:26:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_src20.csv
[Sun Jul 29 05:26:24 2012] fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Jul 29 05:26:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_src20.csv
[Sun Jul 29 05:26:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 05:26:24 2012] fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Jul 29 05:26:24 2012] fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Jul 29 05:26:24 2012] Fit fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Jul 29 05:26:46 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 15.911900 pixels away
[Sun Jul 29 05:26:46 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 05:26:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 05:26:46 2012] Assessing source extent using major
[Sun Jul 29 05:26:46 2012] Source does appear to be extended
[Sun Jul 29 05:26:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 09:12:24 2012] XMMSAS src. selection expression = ellipse(41592.036957, 29148.557159, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 29 09:12:24 2012] Writing source region out to fullrun_mos2_xmm0501110101_pi300-10000_pass1_cl_src11_src.reg
[Sun Jul 29 09:12:24 2012] Extracting stamp from image fullrun_mos2_xmm0501110101_pi300-10000_cl_sm2.00.img.gz, (441, 298) - (516, 373)
[Sun Jul 29 09:12:24 2012] XMMSAS bgd. selection expression = annulus(41592.036957, 29148.557159, 1087.500000, 2175.000000, X, Y)
[Sun Jul 29 09:12:24 2012] Writing fullrun_mos2_xmm0501110101_pi300-10000_pass1_cl_src11.gif
[Sun Jul 29 09:17:14 2012] Mean detx,y = (-12037.77, 7314.34) 
[Sun Jul 29 09:17:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 09:17:30 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 09:17:30 2012] Setting source spectrum file to fullrun_mos2_xmm0501110101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jul 29 09:17:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501110101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Jul 29 09:38:16 2012] Not generating rmf since there are only 79 counts
[Sun Jul 29 09:38:16 2012] rmf not generated due to insufficient counts
[Sun Jul 29 09:39:10 2012] Updating aperture counts using extracted products
[Sun Jul 29 09:39:10 2012] Error reading totcts from fullrun_mos2_xmm0501110101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jul 29 09:39:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 09:39:10 2012] Using photon index=1.80, rate=0.00183, arf fullrun_mos2_xmm0501110101_pi300-10000_pass1_cl_src11.arf
[Sun Jul 29 09:39:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 09:39:10 2012] Updating source flux to 4.2e-14
[Sun Jul 29 09:39:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting