[Sat Jul 28 21:15:06 2012] Detection parameters:
  Position = (321.5, 308.3) = 23 15 44.44 -2 22 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1290.9 +/- 45.3
  Background counts = 95.9
  Rate = 0.03 +/- 0.001

[Sat Jul 28 21:15:07 2012] Off-axis axis estimate = 1.81'
[Sun Jul 29 00:31:37 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 00:31:37 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Sun Jul 29 00:31:37 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.732
[Sun Jul 29 00:31:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34"
[Sun Jul 29 01:02:38 2012] fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 29 01:02:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_src1.csv
[Sun Jul 29 01:02:38 2012] fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 29 01:02:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_src1.csv
[Sun Jul 29 01:02:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 01:02:38 2012] fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 29 01:02:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 29 01:02:38 2012] fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 29 01:02:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 29 01:02:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 01:03:00 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Sun Jul 29 01:03:00 2012] Spatial fit model total counts = 3356.730000, observed total counts = 2790.000000
[Sun Jul 29 01:03:00 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 29 01:03:00 2012] Spatial fit model total counts = 1186.160000, observed total counts = 1004.000000
[Sun Jul 29 01:03:00 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 29 01:03:00 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 01:03:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 01:03:00 2012] Assessing source extent using major
[Sun Jul 29 01:03:00 2012] Source does appear to be extended
[Sun Jul 29 01:03:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 01:03:00 2012] Source is confused with source 4
[Sun Jul 29 01:03:00 2012] Source is confused with source 14
[Sun Jul 29 04:56:59 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 04:56:59 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Sun Jul 29 04:56:59 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.732
[Sun Jul 29 04:56:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.34"
[Sun Jul 29 05:26:23 2012] fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 29 05:26:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_src1.csv
[Sun Jul 29 05:26:23 2012] fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 29 05:26:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_src1.csv
[Sun Jul 29 05:26:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 05:26:24 2012] fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 29 05:26:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jul 29 05:26:24 2012] fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 29 05:26:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jul 29 05:26:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 05:26:46 2012] Spatial fit model total counts = 3416.060000, observed total counts = 2860.000000
[Sun Jul 29 05:26:46 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 29 05:26:46 2012] Spatial fit model total counts = 3022.360000, observed total counts = 2983.000000
[Sun Jul 29 05:26:46 2012] Offset between fit and detection position for source 1 = 3.279151 pixels
[Sun Jul 29 05:26:46 2012] Warning, changing simple spatial fit ID from 1 to 19
[Sun Jul 29 05:26:46 2012] 3029.690000 total counts/ 2208.200000 bgd. counts: snr = 17.481676
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.279151 pixels
  Position = (324.4, 306.9) = 23 15 43.57 -2 22 55.1
  Extent = 19.4 (16.0-22.2)" x 10.1 (8.2-12.0)", rotation angle = 195 (177-209) degrees
  Source counts = 821.5 +/- 55.0
  Background counts = 2208.2
  Rate = 0.02 +/- 0.001
[Sun Jul 29 05:26:46 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 05:26:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 05:26:46 2012] Assessing source extent using major axis lower bound
[Sun Jul 29 05:26:46 2012] Source does appear to be extended
[Sun Jul 29 05:26:46 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.33
[Sun Jul 29 09:12:23 2012] XMMSAS src. selection expression = ellipse(28177.388000, 26651.120000, 1161.624033, 607.626017, 195.387000, X, Y)
[Sun Jul 29 09:12:23 2012] Writing source region out to fullrun_mos2_xmm0501110101_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul 29 09:12:23 2012] Extracting stamp from image fullrun_mos2_xmm0501110101_pi300-10000_cl_sm2.00.img.gz, (258, 240) - (391, 374)
[Sun Jul 29 09:12:23 2012] XMMSAS bgd. selection expression = annulus(28177.388000, 26651.120000, 1936.040056, 3872.080111, X, Y) && !ellipse(28040.690000, 26394.440000, 878.272025, 878.272025, 0.000000, X, Y) && !ellipse(25141.040009, 22662.594055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26210.368960, 30451.676600, 533.640015, 533.640015, 0.000000, X, Y) && !ellipse(28923.285889, 27760.276855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29515.924200, 27710.508000, 1177.952034, 1177.952034, 0.000000, X, Y) && !ellipse(26903.087372, 25358.770996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29107.008000, 25186.560000, 1207.880035, 1207.880035, 0.000000, X, Y) && !ellipse(27209.358000, 27127.944000, 1148.016033, 1148.016033, 0.000000, X, Y)
[Sun Jul 29 09:12:23 2012] Writing fullrun_mos2_xmm0501110101_pi300-10000_pass1_cl_src1.gif
[Sun Jul 29 09:12:27 2012] Mean detx,y = (-505.95, -113.25) 
[Sun Jul 29 09:12:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 09:12:41 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 09:12:41 2012] Setting source spectrum file to fullrun_mos2_xmm0501110101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 29 09:12:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501110101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul 29 09:39:10 2012] Updating aperture counts using extracted products
[Sun Jul 29 09:39:10 2012] Error reading totcts from fullrun_mos2_xmm0501110101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 29 09:39:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 09:39:10 2012] Using photon index=1.80, rate=0.0215, arf fullrun_mos2_xmm0501110101_pi300-10000_pass1_cl_src1.arf
[Sun Jul 29 09:39:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 09:39:10 2012] Updating source flux to 2.7e-13
[Sun Jul 29 09:39:52 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Sun Jul 29 09:39:52 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Jul 29 09:40:31 2012] Reading fit data from xmm0501110101/analysis//spectral/fullrun_mos2_xmm0501110101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jul 29 09:40:31 2012] Spectral fit parameter nH value = 4.93367e+21
[Sun Jul 29 09:40:31 2012] Spectral fit parameter PhoIndex value = 4.20515
[Sun Jul 29 09:40:31 2012] Failed to get F(0.3-8.0) from xmm0501110101/analysis//spectral/fullrun_mos2_xmm0501110101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jul 29 09:40:31 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 09:40:31 2012] Using Nh = 4.9e+21, photon index=4.21, rate=0.0215, arf fullrun_mos2_xmm0501110101_pi300-10000_pass1_cl_src1.arf
[Sun Jul 29 09:40:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 09:40:31 2012] Updating source flux to 1.8e-13