[Sat Jul 28 21:14:46 2012] Detection parameters:
  Position = (207.2, 308.2) = 23 16 17.61 -2 22 48.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.3 +/- 18.5
  Background counts = 49.0
  Rate = 0.007 +/- 0.0008

[Sat Jul 28 21:14:46 2012] Off-axis axis estimate = 6.65'
[Sat Jul 28 23:44:09 2012] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 23:44:09 2012] Initial guess for spatial extent in simple fitting = 9.76"
[Sat Jul 28 23:44:09 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.196
[Sat Jul 28 23:44:09 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.76"
[Sun Jul 29 00:31:36 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jul 29 00:31:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src3.csv
[Sun Jul 29 00:31:36 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jul 29 00:31:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src3.csv
[Sun Jul 29 00:31:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 00:31:37 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jul 29 00:31:37 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jul 29 00:31:37 2012] Fit fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jul 29 01:02:57 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.180483 pixels away
[Sun Jul 29 01:02:57 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 01:02:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 01:02:57 2012] Assessing source extent using major
[Sun Jul 29 01:02:57 2012] Source does appear to be extended
[Sun Jul 29 01:02:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 03:58:07 2012] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 03:58:07 2012] Initial guess for spatial extent in simple fitting = 9.76"
[Sun Jul 29 03:58:07 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.196
[Sun Jul 29 03:58:07 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.76"
[Sun Jul 29 04:56:58 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jul 29 04:56:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src3.csv
[Sun Jul 29 04:56:58 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jul 29 04:56:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src3.csv
[Sun Jul 29 04:56:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 04:56:59 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jul 29 04:56:59 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jul 29 04:56:59 2012] Fit fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jul 29 05:26:43 2012] Spatial fit model total counts = 335.850000, observed total counts = 336.000000
[Sun Jul 29 05:26:43 2012] Offset between fit and detection position for source 6 = 0.206043 pixels
[Sun Jul 29 05:26:43 2012] 336.663000 total counts/ 210.340000 bgd. counts: snr = 8.710067
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.206043 pixels
  Position = (207.2, 308.4) = 23 16 17.60 -2 22 48.7
  Extent = 6.8 (5.5-8.4)", rotation angle = 0
  Source counts = 126.3 +/- 18.3
  Background counts = 210.3
  Rate = 0.003 +/- 0.0005
[Sun Jul 29 05:26:43 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 05:26:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 05:26:43 2012] Assessing source extent using major axis lower bound
[Sun Jul 29 05:26:43 2012] Source does appear to be extended
[Sun Jul 29 05:26:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 08:25:13 2012] XMMSAS src. selection expression = ellipse(17978.605920, 26778.366600, 407.836527, 407.836527, 0.000000, X, Y)
[Sun Jul 29 08:25:13 2012] Writing source region out to fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src6_src.reg
[Sun Jul 29 08:25:13 2012] Extracting stamp from image fullrun_mos1_xmm0501110101_pi300-10000_cl_sm2.00.img.gz, (184, 285) - (231, 332)
[Sun Jul 29 08:25:14 2012] XMMSAS bgd. selection expression = annulus(17978.605920, 26778.366600, 679.727545, 1359.455090, X, Y) && !ellipse(19417.915939, 25634.917938, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 29 08:25:14 2012] Writing fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src6.gif
[Sun Jul 29 08:29:18 2012] Mean detx,y = (-3617.53, -9037.29) 
[Sun Jul 29 08:29:19 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 08:29:26 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 08:29:26 2012] Setting source spectrum file to fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jul 29 08:29:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jul 29 09:39:09 2012] Updating aperture counts using extracted products
[Sun Jul 29 09:39:09 2012] Error reading totcts from fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jul 29 09:39:09 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 09:39:09 2012] Using photon index=1.80, rate=0.00331, arf fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src6.arf
[Sun Jul 29 09:39:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 09:39:09 2012] Updating source flux to 6.6e-14