[Sat Jul 28 21:14:46 2012] Detection parameters:
  Position = (365.8, 497.0) = 23 15 31.56 -2 9 7.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.4 +/- 12.5
  Background counts = 33.6
  Rate = 0.001 +/- 0.0003

[Sat Jul 28 21:14:46 2012] Off-axis axis estimate = 15.20'
[Sat Jul 28 23:44:09 2012] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 23:44:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 28 23:44:09 2012] Initial guess for spatial extent in simple fitting = 14.03"
[Sat Jul 28 23:44:09 2012] source mask rpix=3.2, npix_max = 55, mask sum = 60, frac = 1.081
[Sat Jul 28 23:44:09 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 14.03"
[Sun Jul 29 00:31:37 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src33.ximg exists
[Sun Jul 29 00:31:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src33.csv
[Sun Jul 29 00:31:37 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun Jul 29 00:31:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src33.csv
[Sun Jul 29 00:31:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 00:31:37 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun Jul 29 00:31:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sun Jul 29 00:31:37 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun Jul 29 00:31:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sun Jul 29 00:31:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 01:02:53 2012] Warning, spatial fit 46 centroid is now closest to src. 21
[Sun Jul 29 01:02:53 2012] Warning, spatial fit 62 centroid is now closest to src. 60
[Sun Jul 29 01:02:57 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 18.382019 pixels away
[Sun Jul 29 01:02:57 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 01:02:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 01:02:57 2012] Assessing source extent using major
[Sun Jul 29 01:02:57 2012] Source does appear to be extended
[Sun Jul 29 01:02:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 03:58:07 2012] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 03:58:07 2012] Initial guess for spatial extent in simple fitting = 14.03"
[Sun Jul 29 03:58:07 2012] source mask rpix=3.2, npix_max = 55, mask sum = 60, frac = 1.081
[Sun Jul 29 03:58:07 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 14.03"
[Sun Jul 29 04:56:59 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src30.ximg exists
[Sun Jul 29 04:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src30.csv
[Sun Jul 29 04:56:59 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src30_1.ximg exists
[Sun Jul 29 04:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src30.csv
[Sun Jul 29 04:56:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 04:56:59 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sun Jul 29 04:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sun Jul 29 04:56:59 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sun Jul 29 04:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sun Jul 29 04:56:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 05:26:37 2012] Warning, spatial fit 34 centroid is now closest to src. 42
[Sun Jul 29 05:26:37 2012] Warning, spatial fit 58 centroid is now closest to src. 65
[Sun Jul 29 05:26:43 2012] Warning, spatial fit 14 centroid is now closest to src. 20
[Sun Jul 29 05:26:43 2012] Warning, spatial fit 24 centroid is now closest to src. 20
[Sun Jul 29 05:26:43 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 18.828258 pixels away
[Sun Jul 29 05:26:43 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 05:26:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 05:26:43 2012] Assessing source extent using major
[Sun Jul 29 05:26:43 2012] Source does appear to be extended
[Sun Jul 29 05:26:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 08:25:14 2012] XMMSAS src. selection expression = ellipse(31777.994629, 43190.215912, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 29 08:25:14 2012] Writing source region out to fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src33_src.reg
[Sun Jul 29 08:25:14 2012] Extracting stamp from image fullrun_mos1_xmm0501110101_pi300-10000_cl_sm2.00.img.gz, (328, 459) - (403, 534)
[Sun Jul 29 08:25:14 2012] XMMSAS bgd. selection expression = annulus(31777.994629, 43190.215912, 1087.500000, 2175.000000, X, Y)
[Sun Jul 29 08:25:14 2012] Writing fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src33.gif
[Sun Jul 29 08:34:59 2012] Mean detx,y = (16687.96, -2440.84) 
[Sun Jul 29 08:35:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 08:35:17 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 08:35:17 2012] Setting source spectrum file to fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun Jul 29 08:35:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sun Jul 29 09:12:13 2012] Not generating rmf since there are only 64 counts
[Sun Jul 29 09:12:13 2012] rmf not generated due to insufficient counts
[Sun Jul 29 09:39:09 2012] Updating aperture counts using extracted products
[Sun Jul 29 09:39:09 2012] Error reading totcts from fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun Jul 29 09:39:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 09:39:10 2012] Using photon index=1.80, rate=0.00148, arf fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src33.arf
[Sun Jul 29 09:39:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 09:39:10 2012] Updating source flux to 5e-14
[Sun Jul 29 09:39:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting